• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.2
• /
• pp.195-199
• /
• 2010

Purpose: This study was to investigate the relevance between refractive and anatomical changes temporarily on the eyes after alcohol ingestion. Methods: Eight subjects (16 eyes) which were $24.5{\pm}1.5$ aged males drunk the alcohol of 0.42 g per kg of body weight within 30 minutes. Refractive errors, the radius of corneal curvature, corneal thickness, pupillary size, intraocular pressure, and the length of the ocular axis at 1 h, 4 h, and 24 h after alcohol ingestion were compared with them of non-alcoholic state. Results: At 1 h after alcohol ingestion, breath alcohol concentration was the highest (p<0.001), more negative spherical power was needed (p<0.05) for correction, pupillary diameter was decreased (p<0.05), intraocular pressure was decreased (p<0.001), and the length of the ocular axis was increased compared with each one of non-alcoholic state. At 4 h after alcohol ingestion, all anatomical changes were the same tendency as at 1 h after alcohol ingestion. But at 24 h after alcohol ingestion, both refractive changes and anatomical changes were not significant compared with them of non-alcoholic state. Conclusions: Temporary changes of refractive error after alcohol ingestion may be related with decrease of intraocular pressure and increase of the length of ocular axis.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.699-712
• /
• 2000

Reduced nasal breathing can influence the growth at)d development of facial structures. It nay have many causes, and enlarged adenoid is the most frequent one. To investigate the effects of adenoids to jaw growth, we must first understand the normal growth of adenoids and jaws, and the relationship between size of adenoids and the values lot the jaw variables. The purpose of this study is to present a more objective standard of nasopharyngeal size and jaw dimension at each bone age, by using Cervical Vertebrae Maturation Index(CYMI) of Hassel, from normal occlusion children aged 6 to 17. The results of this study suggests as follows : 1. At same bone age, female's chronologic age was about 2 year older than male. 2. There was a growth peak of nasopharyngeal(NP) height and depth between CVMI 1 to 2 in male, hut in female NP height and depth gradually increase through CVMI 1 to 6. 3. Relative airway of nasopharynx increases the most between CVMI 1 to 2 period in both gender 4. Among adenoid measurements, Ad2-related variables and upper pharynx, and among dentofacial measurements inter canine width in both arch, maxillary intermolar width and palatal depth had high correlation coefficient with adenoid percentage.

• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.334-341
• /
• 2010

Objective: The purpose of this study was to evaluate morphologic differences in the mandibular arch between Egyptian and Korean subjects. Methods: The Egyptian sample consisted of 94 mandibular casts (35 Class I, 32 Class II and 27 Class III). The Korean sample consisted of 462 mandibular casts (114 Class I, 119 Class II, and 135 Class III). The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth. The subjects were grouped according to arch form to compare the frequency distribution of the 3 arch forms between the ethnic groups in each Angle classification. Results: Egyptians had significantly narrower intermolar and intercanine widths ($p$ < 0.001), and shallower intermolar and intercanine depths ($p$ < 0.001) than Koreans. There was an even frequency distribution of the 3 arch forms within the Egyptian group ($p$ = 0.46). However, in the Korean group, the most frequent arch form was the square arch form (46.7%), while the frequency of the tapered arch form was significantly lower (18.8%). Conclusions: These results might provide helpful information in evaluating morphologic differences between ethnic groups in selection of preformed superelastic archwires.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.263-269
• /
• 2013

This research paper is applying Writing Supporting System on the previous research study about writing tool data model on interactive storytelling about family Story. Family story writing supporting system enables users to create text, images, videos and digital contents based on experimental knowledge collected from the first and second generations. The paper about studies on writing tool system on family story, aims to create documentary based high quality contents about each family members and family history. At the same time, overcome generation gaps and the lack of creation infrastructures. Throughout this process, the author will contribute to the expansion of creation devices which can be applied in other researches and writing tools.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.28-37
• /
• 2004

A two-dimensional direct numerical simulation was performed to investigate the evolution and vortical structure of a single vortex in reacting and non-reacting jet flow fields. A predictor-corrector-type numerical scheme with a low Mach number approximation was used, and a two-step global reaction mechanism was adopted as the combustion model. Through the comparisons of single vortex behaviors in reacting and non-reacting jet flow fields, it was found that the evolution characteristics and vortical structure of the single vortex were significantly influenced by a outer vortex that was generated from the buoyance effect as well as the chemical heat release. Furthermore, it was also identified that the differences of the vortical structure in reacting and non-reacting jet flow fields were mainly attributed to the thermal expansion, Baroclinic torque and buoyance effect.

• Journal of Radiation Protection and Research
• /
• v.26 no.2
• /
• pp.51-58
• /
• 2001

In the low level radioactivity measurement, such as environmental radioactivity, there were used commonly cylindrical and Marinelli type beakers by means of measurement container. If there are differences in the matrix density or sample height between standard source and sample, it must be determined full energy peak efficiency considering self absorption effect. In this paper, we compared measured efficiency with calculated full energy peak efficiencies in the HPGe detector using the Monte Carlo method. For cylindrical container, we calculated the variation of the efficiency with sample height. Also, we calculated the variation of the detection efficiency with apparent density in the cylindrical and Marinelli container. It was seen that it need to be corrected for self absorption in the energy range of below 1000keV. Also, in order to verify the validity of calculation, we compared the calculated value with reference value using NIST SRM 4353 reference soil.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.34-43
• /
• 2012

Determining the similarity between two strings can be applied various area such as information retrieval, spell checker and spam filtering. Similarity calculation between Korean strings based on dynamic programming methods firstly requires a definition of the similarity between phonemes. However, existing methods have a limitation that they use manually set similarity scores. In this paper, we propose a method to automatically calculate inter-phoneme similarity from a given set of variant words using a PAM-like probabilistic model. Our proposed method first finds the pairs of similar words from a given word set, and derives derivation rules from text alignment results among the similar word pairs. Then, similarity scores are calculated from the frequencies of variations between different phonemes. As an experimental result, we show an improvement of 10.1%~14.1% and 8.1%~11.8% in terms of sensitivity compared with the simple match-mismatch scoring scheme and the manually set inter-phoneme similarity scheme, respectively, with a specificity of 77.2%~80.4%.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.339-345
• /
• 2017

The flatness of a reference flat plays an important role, from the calibration of an interferometer to the reference for a semiconductor or flat-panel display, etc. Especially if we order the flatness measurement outside Korea, we may spend more time and money. In this paper, we measured the flatness of a reference flat using a three-flat test, which is one of the absolute measurement methods, and calculated its measurement uncertainty. In the three-flat test we adopted, each flat is tested against another flat, with three unknown flats, using an interferometer. Among several three-flat tests, we adopted Griesmann's method which has a low measurement uncertainty and is less dependent on the experimental equipment. As a result, the measurement uncertainty was found to be less than 0.5 nm rms, which is very accurate for high-tech industrial applications.

• Journal of Technology Innovation
• /
• v.25 no.2
• /
• pp.127-152
• /
• 2017

With the advent of the WTO system in 1995, non-tariff barriers including technical barriers to trade(TBT) has become one of the important issues in world trade order. The purpose of this study is to analyse an impact of the calibration and measurement capabilities(CMC), the degree of equivalence of national measurement standards which is maintained by NMIs to provide governments with a technical foundation for wider agreements related to international trade. The results of the analysis using the gravity model with the proxy of the CMC shows that the CMC has a positive impact on Korean trade. Particularly, it was estimated that the CMC registered by high-income economies has more impact on Korean trade than those by low income economies. This implies that the countries highly dependent upon foreign trade like Korea need to have much more interest in the investment into measurement standards and science which is generally considered to be a public goods.

• Journal of Korean Foot and Ankle Society
• /
• v.14 no.1
• /
• pp.5-10
• /
• 2010

Purpose: This study was performed to compare the contact area between three different correcting angles after the proximal crescentic and Ludloff osteotomies of the first metatarsal. Materials and Methods: We used the two sawbone models. Proximal crescentic (PCO) and Ludloff osteotomies (LO) were performed and secured using K-wires under the correcting intermetatarsal angle (IMA) $5^{\circ}$, $10^{\circ}$, and $15^{\circ}$. Then each 6 osteotomized model was scanned five times and measured the contact area using the calculating program. We excluded the highest and lowest values. Results: The mean area of cutting surface was 189 $mm^2$ in PCO, 863 $mm^2$ in LO. The mean contact area (contact ratio; contact area $\times$100/area of cutting surface) of PCO was 149 $mm^2$ (79%) in $5^{\circ}$, 139.5 $mm^2$ (74%) in $10^{\circ}$, 107 $mm^2$ (57%) in $15^{\circ}$ IMA. The mean contact area (contact ratio) of LO was 711 $mm^2$ (82%) in $5^{\circ}$, 535.5 $mm^2$ (62%) in $10^{\circ}$, 330 $mm^2$ (38%) in $15^{\circ}$ IMA. Conclusion: A significant decrease in the contact area and contact ratio according to increase in correcting IMA was noticed in LO. We recommend the PCO rather than LO, when the IMA is needed to correct over $15^{\circ}$.