• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.86-90
• /
• 2013

$^{222}Rn$ concentrations in the groundwater samples without standard material due to the short half-life (3.82 day) were measured through the establishment of the counting efficiency of LSC (Liquid Scintillation Counter) using a standard source of $^{226}Ra$. This study for Quality Assurance/Quality Control (QA/QC) of $^{222}Rn$ analysis was performed to analyze blank samples, duplicate samples, samples of groundwater sampling before and after. In-situ blank samples collected were in the range of 0.44~6.28 pCi/L and laboratory samples were in the range of 1.66~4.95 pCi/L. Their correlation coefficient was 0.9691 and the source contamination from sampling, migration and keeping of samples were not identified. The correlation coefficient between original and duplicate samples from 65 areas was 0.9987. Because radon is an inert gas, in case of groundwater sampling, it is considered to affect the radon concentration. We analyzed samples separately by groundwater sampling before and after using distilled water, but there is no significant difference for $^{222}Rn$ concentrations in distilled waters of two types.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.437-444
• /
• 2007

The purpose of this study was to compare the marginal microleakage of different 2-step adhesive systems in Class V cavities prepared with different diamond points. Forty Class V cavities were prepared with two different (coarse or fine) diamond points on cervical third of extracted molars. The occlusal and gingival margin of cavities was located in enamel and dentin, respectively. They were divided into one of four equal groups (n = 10) and ; Group 1-prepared with coarse diamond point (EX-41), restored with Single Bond and Z 250, Group 2-prepared with fine diamond piont (TF-21F), restored with Sing)e Bond and Z 250, Group 3-prepared with coarse diamond point (EX-41), restored with Clearfil SE Bond and Clearfil AP-X, Group 4-prepared with fine diamond point (TF-21F), restored with Clearfil SE Bond and Clearfil AP-X. Specimens were thermocycled, immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed leakages at enamel and dentinal margins. Data were analyzed using Mann-Whitney and Wilcoxon signed ranked test. In this study, marginal microleakage or Single Bond was not affected by type of diamond points. But Clearfil SE Bond showed higher marginal microleakage at both enamel and dentinal margin when Class V cavity was prepared with coarse diamond point.

• Restorative Dentistry and Endodontics
• /
• v.33 no.6
• /
• pp.499-506
• /
• 2008

The purpose of this study was to compare the push-out strength of a fiber post cemented with various resin cements. Newly extracted 36 human mandibular premolars which had single root canal were selected and their crown portions were removed. The root canal was instrumented using $PROTAPER^{TM}$ system and obturated using continuous wave technique. In each root, a 9-mm deep post space was prepared. #2 translucent fiber post (DT Light post, Bisco Inc., Schaumburg, IL, U.S.A.) was cemented using injection technique with Uni-dose needle tip (Bisco) and six different resin cements. The tested resin cements were Duo-Link (Bisco Inc., Schaumburg, IL, U.S.A.), Variolink II (Ivoclar-Vivadent AG, Schann, Liechtenstein), Panavia F (Kuraray Medical Inc., Okayama, Japan), Multilink Automix (Ivoclar-Vivadent AG, Schann, Liechtenstein), RelyX Unicem (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and Maxcem (Kerr Co., CA, U.S.A.). After storage in distilled water for 24 hours, each root was transversally sectioned into approximately 1-mm thick sections. This procedure resulted in 6 serial sections per root. Push-out test wasperformed using a universal testing machine (EZ Test, Shimadzu Co.) with a crosshead speed of 1 mm/min. The data were analyzed with one-way ANOVA and Tukey HSD (p=0.05). The push-out strength of the groups which cemented fiber post with Panavia F and Multilink Automix were lower than those of the other groups. But, there were no statistically significant difference among groups at a probability level of 0.05.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.204-214
• /
• 2005

This study compared the microtensile bond strength (${\mu}$TBS) and microscopic change of two 2-step and two 1-step self-etching adhesives to dentin according to storage times in distilled water. Occlusal dentin was exposed in 48 human molars. They were divided to four groups by different adhesives: SE Bond group (Clearfil SE Bond), AdheSE group (AdheSE). Adper group (Adper Prompt L-Pop), and Xeno group (Xeno III) . Each group was stored in 37$^{\circ}C$ distilled water for 1, 15, and 30 days. Resin-bonded specimens were sectioned into beams and subjected to ${\mu}$TBS testing with a crosshead speed of 1 mm/minute. For SEM observation, one specimen was selected and sectioned in each group after each stroage time. Resin-dentin interface was observed under FE-SEM. In all storage times, mean ${\mu}$TBS of SE group was significantly higher than those of other groups (p < 0.05). There was no significant difference between mean ${\mu}$TBS of SE group and AdheSE group among all storage times, but significant difference between 1- and 30-day storage in mean y${\mu}$TBS of Adper group and Xeno group (p > 0.05). For 1-and 15-day storage, all groups showed the close adaptation between resin-dentin interfaces. For 30-day storage, resin-dentin interfaces showed wide gap in Adper group and separate pattern in Xeno III group.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.94-101
• /
• 2004

Commercial value of soybean sprouts should be affected by their morphology including the lateral roots. This study was carried out to determine the effect of benzyladenopurine (BA) concentration on growth and morphology of soybean sprouts in order to compare them with the selling products collected from the markets. Four cultivars (cv. Eunhakong, Pungsannamulkong, Sowonkong, and Junjery) were cultured for 6 days after imbibed for 5 hours into different BA solutions (0, 1,2,4, and 8 ppm). On the 6th day, hypocotyl length was measured to calculate the composition rate of ＞ 7 cm (A), 4 to 7 cm (B), ＜ 4 cm (C) and non-germination (D), and the ratio of hypocotyl to root length (H/R ratio) on the base of hypocotyl length as well as lateral root, hypocotyl diameter, and fraction fresh and dry weights. The composition rates classified with hypocotyl length showed big differences between 4 cultivars in class A and C; Class A, in which cv. Sowonkong and Junjery had higher rates than cv. Eunhakong and Pungsannamulkong, was decreased with BA concentration of higher than 4 ppm, but class C showed the reverse result to class A. Any lateral root was not formed in higher than 4 ppm BA solutions although fewer in cv. Pungsannamulkong and Junjery than in the two other cultivars. Hypocotyl and root lengths were decreased with increased BA concentrations, and in all BA concentration, hypocotyl length of cv. Junjery was the longest. Hypocotyl diameter, hypocotyl and total fresh weights were thicker and heavier in 2 to 4 ppm BA concentrations than in the other ones, although in case of BA application, cv, Eunhakong and Sowonkong were heavier. The H/R ratios were increased with increased BA concentration. The ratios of nearly all the selling products ranged from 1 to 2 ppm when compared to them from our experiment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.211-215
• /
• 2002

Pretense production and its characteristics were investigated for Rhizopus stolonifer, Rhizopus oryzae and Absidia corymbifera which were isolated from Korean traditional meju. The optimum culture conditions of the strains for the production of protease in basic medium [wheat bran : 1% glucose solution=1 : 1 (w/v)] were 3$0^{\circ}C$ and 4 days. The optimum pH and temperature for the enzyme activity of crude enzymes produced by Rhizopus sto-lonifer, Rhizopus oryzae and Absidia corymbifera were pH 6.0 and 5$0^{\circ}C$, respectively. The enzymes were relatively stable at pH 4.0~7.0, at temperature below 4$0^{\circ}C$, and at NaCl concentration lower than 16%. The $K_{m}$ value for Hammastein casein was 3.3$\times$10$^{-4}$ , 0.75$\times$10$^{-4}$ and 1.3$\times$10$^{-4}$ M, and $V_{max}$ value was 17.2$\mu\textrm{g}$/min, 9.4$\mu\textrm{g}$/min and 7.8$\mu\textrm{g}$/min, respectively.y.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.475-479
• /
• 2011

Chitosan is a natural polymer that has many physicochemical(polycationic, reactive OH and $NH_2$ groups) and biological(bioactive, biocompatible, and biodegradable) properties. In this study, chitosan nanoparticles were prepared using poly-${\gamma}$-glutamic acid(${\gamma}$-PGA) as gelling agent. Nanoparticles were formed by ionic interaction between carboxylic groups in ${\gamma}$-PGA and amino groups in chitosan. Chitosan(0.1~1 g) was dissolved in 100 ml of acetic acid (1% v/v) at room temperature and stirred overnight to ensure a complete solubility. An amount of 0.1 g of ${\gamma}$-PGA was dissolved in 90 ml of distilled water at room temperature. Chitosan solution was dropped through needle into beaker containing ${\gamma}$-PGA solution under gentle stirring at room temperature. The average particle sizes were in the range of 80~300 nm. The prepared chitosan/${\gamma}$-PGA nanoparticles were used to examine their removal of several heavy metal ions($Cd^{2+}$, $Pb^{2+}$, $Zn^{2+}$, $Cu^{2+}$, and $Ni^{2+}$) as adsorbents in aqueous solution. The heavy metal removal capacity of the nanoparticles was in the order of $Cu^{2+}$ > $Pb^{2+}$ > $Cd^{2+}$ > $Ni^{2+}$ > $Zn^{2+}$.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.103-112
• /
• 2009

The purpose of this study was to compare the effect of curing methods of adhesive resins and resin cements in the root canal. Crown portions of 32 single-rooted mandibular premolars were removed. Routine endodontic treatment was done, and 9 mm deep post spaces were prepared within root canals. No.3 FRC Postec posts (Ivoclar-Vivadent AG, Liechtensteih) were cemented in the post spaces by self-(SC) or light-curing (LC) using two dual-cured adhesives (Adper Scotchbond multi-purpose plus and Exite DSC )and resin cements (RelyX ARC and Variolink II). They were assigned to 4 groups (n=8): R-SC, R-LC, V-SC, V-LC group. After stored in distilled water for 24 hours, each root was transversally sectioned with 1.5 mm thick and made three slices. The specimens were subjected to push-out test in a universal testing machine (EZ Test, Shimadzu Co., Japan) with a crosshead speed of 1 mm/min. The data were analyzed with repeated ANOVA and one-way ANOVA. Also the interface of post-resin cement and resin cement-canal wall of each group was observed under FE-SEM. When fiber posts were cemented into the root canal using total-etch adhesives, the bond strength and adaptation between post and root canal dentin was affected by curing method. Self-cure of adhesives and resin cements showed higher bond strength and closer adaptation than light-cure of them.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.69-75
• /
• 2019

Rosemary (Rosmarinus officinalis L.) is widely used as a food material. Although various physiological activities of rosemary have been reported, there have been no studies on the physiological activity of solvent extracts with different polarities. Rosemary extracts were obtained by extraction of dried powder using 0%, 25%, 50%, 70%, and 95% ethanol (EtOH) in distilled water, methanol, ethyl acetate, and hexane. As these ratios of EtOH are generally chosen by default and scarcely optimized, we investigated the impact of the composition of EtOH in distilled water on extract-related characteristics, such as DPPH free radical scavenging and ${\alpha}$-glucosidase inhibition, on the differentiation of 3T3-L1 adipocytes and inhibition of tyrosinase. Adipogenesis inhibition was highest at 70% EtOH. DPPH scavenging activity and inhibition of tyrosinase activity were reduced with 50% EtOH in water. However, inhibition of ${\alpha}$-glucosidase activity was higher in 50% EtOH in water. The best solvents in terms of DPPH scavenging activity, inhibition of tyrosinase and ${\alpha}$-glucosidase, and differentiation of adipocytes obtained with different concentrations of EtOH, although a lower similar activities were found with 50% ethanol. Considering the extraction solvents, a ratio of EtOH in water gives different content and constituents of compounds. These differences will give activities inhibition of adipogenesis, tyrosinase, ${\alpha}$-glucosidase activity, and DPPH scavenging activity.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.138-150
• /
• 2007

The purpose of this study was to evaluate the difference of surface roughness of composite resin according to composite resin type, polishing methods, and use of resin sealant. Two hundred rectangular specimens, sized $8{\times}3{\times}2mm$, were made of Micro-new (Bisco, Inc., Schaumburg, IL, U.S.A) and Filtek Supreme (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and divided into two groups; Micronew-M group, Filtek Supreme-S group. Specimens for each composite group were subdivided into five groups by finishing and polishing instruments used; M1 & S1(polyester strip), M2 & S2 (Sof-Lex disc), M3 & S3 (Enhance disc and polishing paste), M4 & S4(Astropol) and M5 & S5 (finishing bur), Polished groups were added letter B after the application of resin surface sealant (Biscover), eg, M1B and S1B. After specimens were stored with distilled water for 24hr, average surface roughness (Ra) was taken using a surface roughness tester. Representative specimens of each group were examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using paired t-test, ANOVA and Duncan's tests at the 0.05 probability level. The results of this study were as follows ; 1. The lowest Ra was achieved in all groups using polyester strip and the highest Ra was achieved in M5, S5 and M5B groups using finishing bur. On FE-SEM, M1 and S1 groups provided the smoothest surfaces, M5 and S5 groups were presented the roughest surfaces and voids by debonding of filler on the polished specimens. 2. There was no significant difference in Ra between Micronew and Filtek Supreme before the application of resin sealant, but Micronew was smoother than Filek Supreme after the application of resin sealant. 3. There was significant corelation between Ra of type of composite resin and polishing methods before the application of resin sealant (p=0.000), but no significant interaction between them after the application of resin sealant. On FE-SEM, most of composite resin surfaces were smooth after the application of resin sealant on the polished specimens. 4. Compared with before and after the application of resin sealant in group treated in the same composite and polishing methods, Ra of M4B and M5B was statistically lower than that of M4 and M5, and S5B was lower than that of S5, respectively (p<0.05). In conclusion, surface roughness by polishing instruments was different according to type of composite resin. Overall, polyester strip produced the smoothest surface, but finishing bur produced the roughest surface. Application of resin sealant provided the smooth surfaces in specimens polished with Enhance, Astropol and finishing bur, but not provided them in specimens polished with Sof-Lex disc.