• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.744-752
• /
• 2013

The miscibility between poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was investigated using thermal analyses for the purpose of developing birefringence-free material at oriented state. The effect of methyl acrylate (MA) units as comonomer of PMMA on the miscibility was also studied. All the blends prepared in this study show composition-dependent single $T_g$'s between those of blend components and high transparency over the visible region, indicating the miscibility at molecular level and no discernible effect of MA units on it. No phase separation was observed at elevated temperature of $280^{\circ}C$, higher than the degradation of PLLA and PMMA. The interaction energy density in PLLA/PMMA blends with 17 mol% of MA was measured to be $-0.74J/cm^3$ from the equilibrium melting temperature depression based on the Hoffman-Weeks method. The blends show zero-${\Delta}$n behavior at a specific mixing ratio and the drawing ratio of 3 due to compensation of intrinsic orientation birefringence. Birefringence dispersion of PLLA/PMMA5 blends was also measured to examine the possibility for quarter-wave plates or polarizer protective films.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.51-63
• /
• 2007

The biodeterioration behaviors of wooden parts in the Janggeongpanjeon built in 15 century were investigated according to the types of wood species, positions and parts of wooden column, and environmental conditions. It was found that a high differences of deterioration in the progressing levels of wood decay, according to the types of wood species, positions and parts of wooden column, and environmental conditions. The decay levels were high in the contacted areas with stone foundation which are about up to 8~40 cm above it, although it was shown the many of wooden parts of the round columns are still good condition. In the case of decay type, it was shown the brown-rot in many of the columns at outside of building which made of hardwoods. The decay in position of the columns was most serious in the directions of east-north, west-north and north. It was also indicated that the durability of Zelkova serrata was higher than other wood species of the round columns, while it was in inferior anti-insects.

• Journal of Chest Surgery
• /
• v.34 no.4
• /
• pp.305-310
• /
• 2001

배경: 판막대치술에 냉동보존판막의 이용은 감염에 대한 저항성과 탁월한 혈류역학으로 증가하고 있다. 판막육아세포의 생존율은 이식된 냉동보존 판막의 내구성에 영향을 미친다고 알려져 있고, 세포의 생존율은 warm ischemic time에 영향을 받는 것으로 알려져 있다. 냉동 보존하여 이식할수 있는 공여 판막의 warm ischemic time 의 적정치를 구하기 위하여, warm ischemic time에 다른 세포의 생존율을 관찰하였다. 대상 및 방법: 1.조직의 획득: 실제 판막을 냉동 보존하는 상황과 유사하게 하기 위하여 도살된 돼지의 심장과 폐를 밀봉한 상태로 4~8$^{\circ}C$로 냉장 보관하여 (warm ischemic time) 일정시간이 경과한 후, 심장과 폐에서 심장을 적출하여 4$^{\circ}C$하트만 용액에 24시간 보관하였다.(cold ischemic time). Warm ischemic time에 따라 2시간, 12시간, 24시간 36시간으로 4군으로 나누었으며, 각 군마다8개의 돼지 심자을 이용하였다. 2. 조직의 멸균: RRMI 1640에 항생제를 섞은 용액에 멸균하고, 3 냉동과 냉동보존; American tissue bank에서 제시한 냉동곡선에 따라 냉동하여, 액체질소 탱그에서 7일간 보존 후 해동하였다. 4. 생존율의 측정; 판막의 생존율 검사는 Triphan blue test로 하였고, 각각 warm ischemic period후 , cold ischemic period 후, 해동 후에 시행하였다. 5. 분석방법; 분석은 SAS program의 pearson correlation으로 하였다. 결과: 1. 멸균, 냉동과 냉동 보존하는 과정의 적합성을 규명하기 위하여 이 과정의 전과 후인 Cold ischemic period 후와 해동 후의 대동맥판막의 생존율의 차이를 비교한 결과, 차이가 없었다.(p =0.619). 2, warm ischemic time 과 warm ischemic period 후 , Cole ischemic period 후와 해동후의 대동맥판막의 생존율과의 correlation 은 각각 R= -0.857, -.0.673과 -0.549로 강하거나 , 혹은 뚜렷한 음성적 관계가 있었다. 삼천판막의 생존율과 대동맥판막의 생존율과 뚜렷한 상관관계가 있었다. 결론; 1. Warm ischemic time 이 길어지면 판막유아세포의 생존율이 감소하고, 12시간 이상되면 해동후의 판막육 아페포의 생존율이 50% 이하로 떨어졌다. 2. 본 연구에서 시행한 판막의 냉동보존방법은 세포의 생존율을 유지하는데 양호한 것으로 나타났으며 삼천판막으로 대동맥판막의 생존율을 예측해 볼 수 있다. 3. 그러나, 이식후 장기간 적절한 내구성을 갖기 위한 이식될 판막의 생존율은, 육아세포에 관한 여구가 좀 더 되어야 규명될 것이다.

• Journal of Chest Surgery
• /
• v.40 no.9
• /
• pp.617-623
• /
• 2007

Background: Invasive pulmonary aspergillosis, a frequent fungal infection in immunocompromised patients, is known to have a poor prognosis despite the use of antifungal therapy in leukemic patients. We studied the outcome of surgical resection of invasive pulmonary aspergillosis where bleeding tendency, localized recurrence of infection, and incidence could be reduced. Material and Method: We retrospectively reviewed 14 patients with a hematological malignancy where invasive pulmonary aspergillosis was diagnosed during the 10 years between 1998 and 2007. From the medical records, we reviewed the type and treatment of the hematological malignancy, including the diagnostic methods of invasive pulmonary aspergillosis, the preoperative hematological conditions and their management, and the surgical methods and records. We also analyzed the development of postoperative complications and patient mortality, the recurrence of postoperative invasive pulmonary aspergillosis, and if the patients had a bone marrow transplant. Result: Fourteen patients with invasive pulmonary aspergillosis and a hematological malignancy underwent a pulmonary lobectomy. One patient had a complication of bronchopleural fistula, but there were no other serious complications such as bleeding or wound infection, and none of the patients died postoperatively. Conclusion: We have shown that pulmonary lobectomy is a safe and effective therapy for invasive pulmonary aspergillosis in patients with hematological malignancies that allow further treatment of the hematological malignancy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.188-188
• /
• 2000

DLC (Diamond-Like Carbon) 박막은 높은 경도와 가시광선 및 적외선 영역에서의 광 투과도, 전기적 절연성, 화학적 안정성 및 저마찰.내마모 특성 등의 우수한 물리.화학적인 물성을 갖고 있기 때문에 여러 분야의 응용연구가 이루어지고 있다. 이러한 DLC 박막을 제작하는 과정에는 여러 가지가 있으나, 본 연구에서는 ECR-PECVD electron cyclotron resonance plasma enhanced chemical vapor deposition) 방법을 사용하였다. 이것은 최근에 많이 이용되고 있는 방법으로, 이온화률이 높을뿐만 아니라 상온에서도 성막이 가능하고 넓은 진공도 영역에서 플라즈마 공정이 가능한 장점이 있다. 기판으로는 4" 크기의 S(100)를 사용하였고, 박막을 제작하기 전에 진공 중에서 플라즈마 전처리를 하였다. 플라즈마 전처리는 Ar 가스를 150SCCM 주입시켜 5$\times$10-1 torr 의 진공도를 유지시키면서, ECR power를 700W로 고정하고, 기판 bias 전압을 -300 V로 하여 5분 동안 기판을 청정하였다. DLC 박막은 ECR power를 700W. 가스혼합비와 유량을 CH4/H2 : 10/100 SCCM, 증착시간을 2시간으로 고정하고, 기판 bias 전압을 0, -50, -75, -100, -150, -200V로 변화시켜가면서 제작하였다. 이때 ECR 소스로부터 기판까지의 거리는 150mm로 하였고, 진공도는 2$\times$10-2torr 였으며, 기판 bias 전압은 기판에 13.56 MHz의 RF power를 연결하여 RF power에 의해서 유도되는 negative DC self bias 전압을 이용하였다. 제작된 박막을 Auger electron spectroscopy, elastic recoil detection, Rutherford backscattering spectroscopy, X-ray diffraction, secondary electron microscopy, atomic force microscoy, $\alpha$-step, Raman scattering spectroscopu, Fourier transform infrared spectroscopy 및 micro hardness tester를 이용하여 기판 bias 전압이 DLC 박막의 특성에 미치는 영향을 조사하였다. 분석결과 본 연구에서 제작된 DLC 박막은 탄소와 수소만으로 구성되어 있으며, 비정질 상태임을 알 수 있었다. 기판 bias 전압의 증가에 따라 박막의 두께가 감소됨을 알 수 있었고, -150V에서는 박막이 거의 만들어지지 않았으며, -200V에서는 기판 표면이 식각되었다. 이것은 기판 bias 전압과 ECR 플라즈마에 의한 이온충돌 효과 때문으로 판단되며, 150V 이하에서는 증착되는 양보다 re-sputtering 되는 양이 더 많을 것으로 생각된다. 기판 bias 전압을 증가시킬수록 플라즈마에 의한 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 (dehydrogenation) 현상을 확인할 수 있었으며, 이것은 C-H 결합에너지가 C-C 결합이나 C=C 결합보다 약하여 수소 원자가 비교적 해리가 잘되므로 이러한 현상이 일어난다고 판단된다. 결합이 끊어진 탄소 원자들은 다른 탄소원자들과 결합하여 3차원적 cross-link를 형성시켜 나가면서 내부 압축응력을 증가시키는 것으로 알려져 있으며, hardness 시험 결과로 이것을 확인할 수 있었다. 그리고 표면거칠기는 기판 bias 전압을 증가시킬수록 더 smooth 해짐을 확인하였다.인하였다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.218-227
• /
• 2003

Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au ohmic contacts to n-type InCaAs were investigated for applications to AlGaAs/GaAs HBT emitter ohmic contacts. In the Pd/Si/Ti/Pt ohmic contact, as-deposited contact showed non-ohmic behavior, and high specific contact resistivity of $5\times10^{-3}\Omega\textrm{cm}^2$ was achieved by rapid thermal annealing at $375^{\circ}C$/10 sec. However, the specific contact resistivity decreased remarkably to $2\times10^{-6}\Omega\textrm{cm}^2$ by annealing at $425^{\circ}C$/10sec. In the Pd/Si/Pd/Ti/Au ohmic contact, minimum specific contact resistivity of $3.9\times10^{-7}\Omega\textrm{cm}^2$ was achieved by annealing at $400^{\circ}C$/20sec. In both ohmic contacts, low contact resistivity and non-spiking planar interface between ohmic materials and InGaAs were maintained. Therefore, these thermally stable ohmic contact systems are promising candidates for compound semiconductor devices. RF performance of the AlGaAs/GaAs HBT was also examined by employing the Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au systems as emitter ohmic contacts. Cutoff frequencies were 63.9 ㎓ and 74.4 ㎓, respectively, and maximum oscillation frequencies were 50.1 ㎓ and 52.5 ㎓, respectively. It shows very successful high frequency operations.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.214-217
• /
• 2007

A about 2-month- old, mixed female cat was referred to Yeon Chang Veterinaly Clinic in Taiwan. Because this patient was wandering cat, precise history was not blown. At first admission, miosis, ptosis and protrusion of the nictitating membrane was observed in the right sided eye, and also slight miosis was found in the left sided eye. The patient was diagnosed into feline HS. Oculo-AP and injection-AP with dexamethasone were applied to this patient. Oculo-AP at Shang Jiao regions of both eyes was done for 10 minutes. In addition, injection-AP with dexamethasone (0.2 ml/acupoint) at BL01-Jing Ming, BL02-Zan Zhu and ST01-Cheng Qi. After AP treatment, prolapse of the nictitating membrane was amazingly disappeared and pupil was dilatated at session 1. Ocular findings at session 2 (one day after session 1) were maintained with nearly normal state. Accordingly, the present patient was a case with feline HS that showed favorable therapeutic effect by AP treatment.

• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.24-34
• /
• 1985

To estimate the fundamental situation of weed emergence and it's competition to paddy rice (critical competition period and threshold level) in the southern paddy area in Korea, two rice cultivars (Pungsanbyo and Tongjinbyo) under two cropping periods (Mono- and After-barley-cropping) were experimented. As a result, the dominant weed species (Monochoria vaginalis and Scirpus juncoides Roxb.) and the better emerging conditions (rather at the monocropping and cv. Punsanbyo) were identified. Also, the main components of yield decrease (25-55% of the weed-free check) of both cultivars as affected by weed competition were the number of spikelets, panicle and ripening rate in monocropping, and the ripening rate and grain weight in after-barley-cropping, respectively. Under the situation of combinated dominance with Monochoria v. and Scirpus j. among others, the duration of critical competition periods was enlarged.

• Korean Journal of Weed Science
• /
• v.18 no.2
• /
• pp.106-115
• /
• 1998

This study was conducted to investigate the effect of oxadiazon, molinate, thiobencarb before seeding on control of red rice and barnyardgrass in water-seeded rice. High application rate plot among oxadiazon treatment plots could observe phytotoxicity symptoms depending on field conditions, but these injury recovered gradually with time. Molinate and thiobencarb application plots at the concentration of 225~400, 210~420g ai/l0a respectively were not observed phytotoxicity. Control of red rice was different according to kinds of herbicides and application rates. Oxadiazon showed higher control performance at the concentration of more than 60g ai/10a. Control effect of molinate and thiobencarb against red rice was enhanced with the increase of application rate, and both herbicides showed satisfactory effect at more than 300g ai/10a. Control of barnyardgrass showed up to 90~100% in all tested herbicides. There was no significant yield reduction by oxadiazon, molinate, and thiobencarb application before seeding in all tested field. In the pot experiment, crop injury, seedling stand, and early growth were more advantageous at time of drainge after one day after seeding than flooding until rooting.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.327-331
• /
• 2011

Purpose: The purpose of this study was an accurate grasp of the astigmatic change due to eyes accommodation on near vision and suggested problems occurring accommodative astigmatism using near glasses. Methods: 154 subjects(308eyes) from 20 to 40 years selected for this study who had many opportunity of near vision. First, far vision corrective refraction measured using the phoropter, and then both eyes opened simultaneously for maintaining the function of binocular put away dot chart 40 cm. One eye was fogging and the other eye measured near vision astigmatism axis and degrees astigmatism using cross cylinder, and then compared with far astigmatism. Results: Increased degree of astigmatism persons on near vision more than decreased or did not changed degree of astigmatism persons, which could affect visual acuity more than 0.75 diopters in 30 eyes with an increase of 9.7% of total subjects. Direct astigmatism and oblique astigmatism were increased on near vision. Astigmatic axes were rotated base in direction on both eyes and 66.9% of subjects were more than ${\pm}$5$^{\circ}$ rotation. Due to the rotation axis of astigmatism, residual astigmatism is expected to occur and expect to adversely affect the eyes. Conclusions: Long-term using the glasses without correction of increased astigmatic and rotated axis on near vision should occur new residual astigmatism and increase the asthenopia also. Considered to be taken astigmatic change on near vision during near refraction examination.