• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.859-866
• /
• 2022

Active disturbance rejection control is a method in which the disturbance is removed from the controller by estimating the state variable using the Luenberger observer. The Luenberger observer is estimated by defining a nonlinear term including disturbance with constant characteristics in a steady state as a state variable. It can be shown that the speed tracking performance is improved by compensating the estimated state variable to the PI controller and the IP controller. The disturbance removal performance of the tracking control can be confirmed by observing that the estimated state error is within 1.9 [%] in the case of load fluctuation and the steady-state state tracking error converges to zero.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2353-2363
• /
• 1994

This paper is concerned with the design of a robust digital controller using reduced-order observer on a robotic manipulator under the disturbance. In most cases of robotic manipulator since all state vectors are not measurable, the unmeasurable state vectors must be estimated or reconstructed. Other problems are caused by the nonlinear element like as nondifferentiable Coulomb friction, disturbance due to the gravitational pull, and the torsional spring effect of a link between the drive motor and the manipulator arm. The controller is based on feeding back the observable variables and the estimated state variables which are generated by the observer, and augmenting the system by additional discrete integrators. The feedback gain parameters are obtained by first applying the optimal control theory and then readjusting the feedback parameters to eliminate the limit cycle by using describing Function for nonlinear hybrid system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.781-788
• /
• 1987

The state variables estimated in an observer were useed in feedback control of a hydraulic servosystem to increase the system stability and to enhance the system performance. The nonlinear hydraulic servosystem with the inherent nonlinearities due to the square root function of flow equation, the Coulomb friction and so on, was modelled as a fourth order linear hydraulic servosystem. Also, a second order linear system was derived for the observer-controller design. For these models, a fourth order linear observer and a second order linear observer were constructed respectively to evaluate the performance of the observer-based hydraulic servosystem. The results obtained from series of simulation showed that the system which had shown oscillatory phenomenon under proportional control became stable with the same maximum acceleration and velocity that it had started under proportional control.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.419-424
• /
• 2010

Through the process of state estimation in the electric railway substation, this paper presents a new method for improving the reliability of the measurements corrupted by gauge error. Unlike the case of commercial power systems, it has been difficult to perform the state estimation by using the usual methods in the electric railway substation. At some of the monitoring points in the substation, most often, it is hard to define the measurement functions by use of the states or as we set up a new states set with the change of system topology, some of the measurement functions become part of the states themselves, which leads to poor results. To resolve the problems in the existing method caused by the relations between the states and the measurement functions at the monitoring points, the proposed method in this paper exploits the equality constraints. They can be derived numerously and concisely from the current and the voltage attributes of the Scott transformer and the buses connecting conditions, etc. We have proofed the effectiveness of the proposed method by the test on a standard sample substation.

• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.72-78
• /
• 2005

This paper describes the design of a robust output-feedback controller for a single-input single-output nonlinear dynamical system with a full relative degree. While all the previous research works on the output-feedback control are based on dynamic observers, a new state estimator which uses the past values of the measurable system output is proposed. We name it backward-difference state estimator since the derivatives of the output are estimated simply by backward difference of the present and past values of the output. The disturbance generated due to the error between the estimated and real state variables is compensated using an additional robustifying control law whose gain is tuned adaptively. Overall control system guarantees that the tracking error is asymptotically convergent and that all signals involved are uniformly bounded. Theoretical results are illustrated through a simulation example of inverted pendulum.

• ICROS
• /
• v.14 no.3
• /
• pp.51-57
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1650_1651
• /
• 2009

DC/DC 승압 컨버터는 인덕터 내부 저항으로 인하여 부하 저항의 변화가 시스템 동작점에 영향을 미치게 되며, 이로 하여 제어기 설계의 기준이 되는 선형화된 모델은 불확실성을 가지게 된다. 본 논문은 인덕터의 내부 저항과 출력단의 부하 변동으로 인한 불확실성에 대하여 출력 전압의 강인성을 향상시키기 위해 PI 관측기 기반 적분형 상태 변수 궤환 제어기를 제안한다. PI 관측기는 불확실한 시스템 제어에 널리 사용되는 오차의 적분항을 Luenberger 관측기에 추가한 형태로써 불확실성에 강인한 추정 성능을 보인다. 모의실험을 통해 불확실성이 존재하는 경우 제안된 제어기의 강인성을 확인하고 설계된 관측기가 Luenberger 관측기에 비해 상태변수 추정 성능이 우수함을 보인다.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.274-276
• /
• 2005

배전계통 상태추정이란 배전계통을 운영하고 제어하기 위하여 모선전압, 선로조류, 모선부하와 같은 상태변수들의 측정된 값을 이용하여 여러가지 운영에 필요한 정보를 활용하고 배전계통으로부터 측정치에 기초하여 미지의 상태변수들을 추정하는 것이다. 변전소 제어센터에 있는 SCADA 시스템은 실시간으로 배전계통을 모니터링하고 제어하기 위하여 전력계통을 주기적으로 스캔하고 엄청난 양의 데이터를 획득하여 처리한다. 이들 측정값들은 유효전력, 무효전력, 전압, 전류, 스위치나 차단기의 상태들이다. 이들 데이터들은 중앙전력계통 제어센터나 지역제어센터로부터 산발되어 있는 정보를 대부분 RTU를 통하여 획득하게 된다. 이러한 이유로 배전계통의 상태추정은 송전계통과는 달리 배전계통 자체가 토폴로지상으로 산발되어 있을 뿐만 아니라 대규모이기 때문에 분산형으로 구성하여 처리하는 알고리즘을 필요로 한다. 본 논문에서는 배전계통에 대한 분산형 상태추정기의 알고리즘을 제안하고자 한다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.265-269
• /
• 2005

본 논문에서는 최대 견인력 제어를 위해서 최소 차원 부하 토크 외란 관측기를 이용하여 점착력 계수를 추정하고 추정한 점착력 계수의 미분치를 PI 토크 제어하는 Anti-slip제어를 제안한다. 최소차원 부하 토크 외란 관측기는 회전자의 위치 정보와 토크 전류의 정보를 이용하여 부하 외란토크를 추정하고, 부하 외란 토크에 철도차량 상수를 이용하여 점착력 계수를 추정한다. 또한 부하토크외란 관측기는 구조가 간단하며, 시스템의 외란 및 각종 제어이득, 시스템의 상수 변화에 대해서도 견실한 견인력 제어 특성을 가지고 있다. 이와 같은 시스템의 모델링과 전동기 토크에 대한 회전자의 위치 정보를 이용하여 최소차원 부하 토크 외란 관측기의 상태변수인 점착력 계수를 추정하고, 추정한 점착력 계수의 미분치를 PI토크 Anti-Slip제어하여, 최대 견인력 제어가 되도록 하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.284-290
• /
• 2013

The authors propose a nonlinear unknown input observer to estimate the angular speed of a satellite and to detect faults of reaction wheels. Input values are necessary to estimate the angular speed. Therefore, estimation errors are inevitable if faults occur in actuators or reaction wheels. Unknown input observers are useful to estimate the states of a system without being affected by unknown faults. The authors have designed a nonlinear unknown input observer by using the SDRE method and verified the proposed observer via numerical simulations. In spite of various and simultaneous faults, we have estimated the states and detected faults exactly by the proposed nonlinear unknown input observer.