• Journal of Radiation Protection and Research
• /
• v.38 no.1
• /
• pp.37-43
• /
• 2013

In case of neutron dose measurement using TLDs (thermo-luminescence dosimeters), because the neutron energy dependence of the TLD is very high, the calibration of the energy response according to the characteristics of the neutron spectrum of workplace is required. In the present study, the ambient dose equivalent rates inside and around the Long-Counter (neutron detector) with narrow and complex inside in the neutron field of $^{252}Cf$ were evaluated. The calibration factors to account for the neutron energy dependence of TLDs were established for both the bare and $D_2O$ modulated $^{252}Cf$ neutron beams, respectively. The values of the TLD's measurement were compared with the computational results of the MCNPX (Monte Carlo N-Particles transport code). When using the two calibration factors of the TLD than a single calibration factor, the measured and the calculated values at the point of verification outside and inside the Long-Counter were in more good agreement. This results show that TLD should be calibrated in the reference neutron field similar to workplace situation.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.61-67
• /
• 2021

Isotopic compositions of snow or ice have been used to reconstruct paleoclimate and to calculate contribution to streamwater using isotopic hydrograph separation as an end member. During freezing and melting of snow or ice, isotopic fractionation occurs between snow or ice and liquid water. Isotopic evolution during melting process has been studied by field, melting experiments and modeling works, but that during freezing has not been well studied. In this review, isotopic fractionation during equilibrium freezing is discussed using the linear relationship between two stable water isotopes (oxygen and hydrogen) and the Rayleigh fractionation. Snow, evaporated from nearby ocean and condensated, follows the Global Meteoric Water Line (slope of 8), but the melting and freezing of snow affect the linear relationship (slope of 19.5/3.1~6.3). The isotopic evolution of liquid water by freezing observed in the open system during Rayleigh fractionation is also seen in the closed system. The isotopic evolution of snow or ice in the open system where the snow or ice is continuously removed becomes more enriched than the residual liquid water by the fractionation factor. The isotopic evolution of snow or ice in the closed system eventually equals the original isotopic compositions of liquid water. It is expected the understanding of isotopic evolution of snow or ice by freezing to increase the accuracy of the paleoclimate studies and hydrograph separation.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.973-979
• /
• 2020

This study aims to objectively and quantitatively determine the social emotion of empathy by collecting pupillary response. 52 subjects (26 men and 26 women) voluntarily participated in the experiment. After the measurement of the reference of 30 seconds, the experiment was divided into the task of imitation and spontaneously self-expression. The two subjects were interacted through facial expressions, and the pupil images were recorded. The pupil data was processed through binarization and circular edge detection algorithm, and outlier detection and removal technique was used to reject eye-blinking. The pupil size according to the empathy was confirmed for statistical significance with test of normality and independent sample t-test. Statistical analysis results, the pupil size was significantly different between empathy (M ± SD = 0.050 ± 1.817)) and non-empathy (M ± SD = 1.659 ± 1.514) condition (t(92) = -4.629, p = 0.000). The rule of empathy according to the pupil size was defined through discriminant analysis, and the rule was verified (Estimation accuracy: 75%) new 12 subjects (6 men and 6 women, mean age ± SD = 22.84 ± 1.57 years). The method proposed in this study is non-contact camera technology and is expected to be utilized in various virtual reality with smart glasses.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.4
• /
• pp.179-190
• /
• 2004

Precambrian metamorphic rocks of Yeongyang-Uljin area, which is located in the eastern part of Sobaegsan Massif, Korea, are composed of Pyeonghae, Giseong, Wonnam Formations and Hada leuco granite gneisses. These show a zonal distribution of WNW-ESE trend, and are intruded by Mesozoic igneous rocks and are unconformably overlain by Mesozoic sedimentary rocks. This study clarifies the deformation history of Precambrian metamorphic rocks after the formation of gneissosity or schistosity on the basis of the geometric and kinematic features and the forming sequence of multi-deformed rock structures, and suggests that the geological structures of this area experienced at least four phases of deformation i.e. ductile shear deformation, one deformation before that, at least two deformations after that. (1) The first phase of deformation formed regional foliations and WNW-trending isoclinal folds with subhorizontal axes and steep axial planes dipping to the north. (2) The second phase of deformation occurred by dextral ductile shear deformation of top-to-the east movement, forming stretching lineations of E-W trend, S-C mylonitic structure foliations, and Z-shaped asymmetric folds. (3) The third phase deformation formed I-W trending open- or kink-type recumbent folds with subhorizontal axes and gently dipping axial planes. (4) The fourth phase deformation took place under compression of NNW-SSE direction, forming ENE-WSW trending symmetric open upright folds and asymmetric conjugate kink folds with subhorizontal axes, and conjugate faults thrusting to the both NNW and SSE with drag folds related to it. These four phases of deformation are closely connected with the orientation of regional foliation in the Yeongyang-Uljin area. 1st deformation produced regional foliation striking WNW and steeply dipping to the north, 2nd deformation locally change the strike of regional foliation into N-S direction, and 3rd and 4th deformations locally change dip-angle and dip-direction of regional foliation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.398-410
• /
• 1982

Summer crops grown in uplands are greatly diversified and show a large variation in difference with year and location in Korea. The principal factor for the variation is weather, in which precipitation and temperature play a leading role and such a weather factors as wind, sun lights also influence production of the summer crops. Since artificial control of weather conditions as a main stress factor for crop production is almost impossible, it must be minimized only by an improvement of cultivation techniques and crop improvement. Precipitation plays a role as one of the most important factor for production of the summer crops and it is considered in two aspects, drought and excess moisture. This country, which belongs to monsoon territory, necessarily encounter one of this stress almost every year, even though the level is different. Therefore, the facilities for both drought and excess moisture are required, but actually it is not easy to complete for them. On this account, crops tolerant to drought, excess moisture and pests should be considered for establishing summer crops. For the districts damaged habitually every season, adequate crops should be cultured and appropriate method of planting, drainage and weed control should be applied diversely. Injuries by temperature is mainly attributed to lower temperature particularly in late fall and early spring, although higher temperature often causes some damages depending upon the kind of crops. Sometimes, lower temperature in summer season playa critical role for yield reduction in the summer crops. However, certain crops are prevented to some extent from this kind of stress by improving varieties tolerant to cold, hot weather or early maturing varieties. As is often the case, control of planting time or harvesting is able to be a good management for escaping the stress. Lodging, plant diseases and pests are considered as a direct or indirect damage due to weather stress, but these are characters able to be overcome by means of crop improvement and also controlled by other suitable methods. In addition, polytical supports capable of improving constitution of agriculture into modern industry is urgently required by programming of data for the damages, establishment of damage forecasting and compensation system.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1068-1075
• /
• 2012

Poly(butylene terephthalate) (PBT)/Nylon6,12 core/shell micro fiber were prepared by extrusion molding. To investigate their optimum extrusion conditions, compatibility of PBT/Nylon6,12 blend micro fiber in conformity to their weight ratio and manufacture temperature was explored with SEM morphology and DSC. The alterations in their mechanical properties by extrusion speed were compared and analyzed through a UTM. In comparison with SEM figures, the domain sizes of Nylon6,12 were gradually declined by increasing the extrusion temperature of blends. Furthermore, according to these SEM images, the phase separation between Nylon6,12 domain and PBT matrix became indistinct with increasing of weight percentage of Nylon6,12. In case of DSC, the boundaries of two peaks were almost disappeared when increasing the extrusion temperature and also intervals of each two melting peaks became narrow as increasing the Nylon6,12 ratio. The mechanical properties including tensile strength, elongation, flexural strength and flexural modulus were increased as the increase in the extrusion temperature until $260^{\circ}C$. However, the mechanical properties were actually deteriorated over $260^{\circ}C$. The tensile strength, elongation, flexural strength and flexural modulus at $260^{\circ}C$ were 560 $kg_f/cm^2$, 220%, 807 $kg_f/cm^2$ and 22,146 $kg_f/cm^2$, respectively. These values are more than intermediate values of mechanical properties of PBT and Nylon6,12. These results mean that there is compatibility between PBT and Nylon6,12. Based on the extrusion conditions that produced optimum compatibility of blend, as a result, our group obtained micro fibers with the core/shell structure.

• Reproductive and Developmental Biology
• /
• v.37 no.3
• /
• pp.129-134
• /
• 2013

A total of 30 Korean native pigs (gilt 15, boar 15) were used to investigate the carcass characteristics, meat quality, amino acid, and fatty acid composition by gender. The carcass weight of boars were significantly higher than gilts, whereas the carcass yield of gilts had significantly higher than boars (p<0.01). Boars had significantly higher moisture contents in loin muscle than gilts, whereas the protein contents of loin muscle had significantly higher in gilts than boars (p<0.01). In the results of meat quality analysis, the cooking loss (p<0.01), shearing force (p<0.05), lightness (L) and yellowness (b) in meat color (p<0.05) were significantly higher, but the pH was significantly lower (p<0.01) in gilts compared with boars. Arginine (p<0.05), alanine, aspartic acid, histidine, leucine, lysine, phenylalanine, serine, threonine and tyrosin (p<0.01) for gilts were significantly higher than those for boars. The results of fatty acid composition showed that gilts had significantly higher contents of C16:1n7, C18:1n9, C20:1n9 (p<0.01) than boars in intramuscular fat, whereas boars had significantly higher contents of C18:2n6, C20:4n6 (p<0.01) and C18:3n3 (p<0.05) than gilts in intramuscular fat.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.1935-1944
• /
• 2000

This research was performed to investigate the effects of the location of recirculation port on the wastewater treatment efficiency of an anaerobic hybrid reactor consisted of a fluidized bed and a packed bed. The recirculation port was located either at the top of the packed bed (Reactor 2) or above the fluidized bed (Reactor 1). Media for the fluidized bed and the packed bed were granular activated carbon and Pall ring-type plastic media. respectively. At organic loading rates(OLR) up to $6.2kg\;COD/m^3-day$. Reactor 2 showed somewhat better performance than Reactor 1 with COD removal efficiencies of 85.0-95.2%. The COD removal efficiencies of the reactors drastically deteriorated at OLRs above $6.2kg\;COD/m^3-day$, and the tendency was more severe for Reactor 1 than for Reactor 2. Eventhough the two reactors showed similar effluent SS concentrations at OLRs below $3.6kg\;COD/m^3-day$, Reactor 2 showed higher effluent SS concentrations than Reactor 1 at OLRs above $5.3kg\;COD/m^3-day$. Reactor 2 was stabler than Reactor 1 with a methane production rate of $5.5kg\;COD/m^3$-day at the OLR of $13.3kg\;COD/m^3-day$. An abrupt increase in effluent volatile acid concentration was observed at the OLR of $6.2kg\;COD/m^3-day$ for Reactor 1 and $7.1kg\;COD/m^3-day$ for Reactor 2. and the increase was greater in Reactor 1. In conclusion. the range of OLR for adequate treatment in the hybrid reactor was determined according to the location of the internal recirculation port. It is more desirable for higher OLRs to locate the recirculation port at the top of the packed bed in order to utilize the whole volume of the reactor.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.52-64
• /
• 2011

In this study, the effects of street improvement projects in particular regions are carefully scrutinized, classified, and compared based on the types of citizen participation in those projects which are offered as one of several urban regeneration methods. The Wonju and Siheung Street Improvement Projects were selected for case studies, and in-depth interviews and a survey are conducted in both regions. As a result of in-depth interviews, the Wonju project is the community initiative type in which the community has responsibilities and decision-making abilities. On the other hand, Siheung is the community participative type in which the opinions of the community have been limited The survey targeted more than 100 local merchants, and they were asked to answer to the questions which were categorized into 21 items with a 5-point Likert scale. The analysis method was carried out through a reliability test, regression. average analysis on each group, and a T-test by SPSS 18.0. Factor analysis results show four factors: physical, partnership, community, and economical revitalization. These results reveal that the social factor can be sub-divided into a community factor and partnership factor. As a result of revitalization factors by citizen participation type, the resident initiative type is more revitalized than the resident participative type in all four factors, and shows positive responses in physical and economical revitalization factors. In particular, the physical revitalization factor has a big impact on resident satisfaction regardless of type. The community revitalization factor also has an impact on two types. It reveals that the communication is as important as physical improvement. However, it shows that no type of project affects partnership revitalization. As a result of this study, if we considered only physical improvement as project achievement, you can achieve the desired outcome without consideration of residents' participation types. Furthermore, if regional revitalization is the goal of a street improvement project, we must consider other factors such as a partnership and community revitalization.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.453-462
• /
• 1998

Macrobenthic community structure was studied at thirteen stations in Taebudo subtidal area, Korea, from July to October 1996. Triple macrobenthos samples were collected using a van Veen grab (0.1 $m^2$) at each station during the study period. A total of 209 species of macrobenthos was sampled with a mean density of 1,093 ind./$m^2$ and biomass of 134,86 g/$m^2$. Of these, there were 72 species of polychaetes ($34.5\%$), 69 crustaceans ($33.0\%$) and 49 molluscs ($23.4\%$). Polyalaetes were represented as a density-dominant faunal group with a mean density of 608 ind./$m^2$, comprising $55.6\%$ of the total benthic animals. It was followed by crustaceans with 307 ind./$m^2$($28.1\%$ of the total density), Echinoderms were represented as a biomass-dominant faunal group with a mean biomass of 54.21 g/$m^2$($40.2\%$ of total biomass). Total number of species and diversity were low in the inner part of the study area with high mud content and high in the offshore stations of mixed sediments. Major dominant species were three polychaetes, Heteromastus filifomis, Scoloplos armiger and Tharyx sp. whose mean densities were 70 ind./$m^2$, 67 ind./$m^2$, and 66 ind./$m^2$, respectively. Cluster analysis showed that the study area could be divided into five stational groups based on the faunal composition, that is, the innermost stations, coastal stations, transitional stations and two offshore station groups. The species diversity of these groups increased from the inner stational group toward the outer groups.