• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.208-216
• /
• 2004

Advanced overload protection module for full scale airframe structural test was developed by improving the existing overload protection module. When performing the full scale airframe structural test, overload can be applied to the test article due to unexpected situations such as system shutdown, test article failure, and deficiency of design strength. Therefore, the overload protection module is needed for protecting the test article in unexpected overload situations. In this paper, the function of the existing overload protection module was summarized for each component and the problems encountered when using it in structural test were analyzed in addition, the development of advanced overload protection module was described.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.39-46
• /
• 2009

Wireless sensor networks consist of small, autonomous devices with wireless networking capabilities. In order to further increase the applicability in real world applications, minimizing energy consumption is one of the most critical issues. Therefore, accurate energy model is required for the evaluation of wireless sensor networks. In this paper we analyze the power consumption for wireless sensor networks. To develop the power consumption model, we have measured the power characteristics of commercial Kmote node based on TelosB platforms running TinyOS. Based on our model, the estimated lifetime of a battery powered sensor node can use about 6.9 months for application of human detection using PIR sensors. This result indicates that sensor nodes can be used in a monitoring system for elderly living alone.

• Journal of the Korean Institute of Gas
• /
• v.19 no.1
• /
• pp.45-50
• /
• 2015

This study is an analysis of characteristics and the causes of serious accidents in chemical industry. The statistical analysis was focused on preventive facilities, equipment failures, accident materials and instabilities of workers and employment type. First, it showed that the highest number of the victims of accidents were involved in the industry of chemical materials and chemical products among the investigation of the manufactural industries. Also, particularly, they were investigated to be focused on the occurrence of the serious accidents in preventive facilities. Secondly, the most of the victims of serious accidents were found out not to be temporary or part-time worker but regular workers and most of the accidents occur in the form of big accidents involving more than 4 workers.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.2
• /
• pp.58-66
• /
• 2007

지상, 항공 및 우주를 이동하는 모든 물체는 반드시 자신의 자세를 결정하기 위해서 여러 가지 센서들을 장착하여 그 신호를 이용해서 자동 항법, 유도 및 제어를 수행한다. 이때, 동역학 특성이 빠른 시스템들은 반드시 각속도를 측정할 수 있어야 하는데 이를 해결하는 장비가 자이로인 것이다. 본 논문에서는 다양한 자이로를 소개하며 그 원리와 성능 그리고 적용 분야에 이르기까지 현황을 집중 분석하고 특히 세계적인 자이로 개발업체를 소개하면서 그 업체가 보유하고 있는 제품들을 일부 소개한다. 자이로는 초창기 김벌 시스템을 이용한 관성원리를 적용한 것부터 시작하여 현재는 광학 시스템을 적용한 RLG 및 FOG 자이로가 많은 분야에서 사용되고 있고, 최근 새롭게 부각되어 개발을 시작하고 있는 MEMS 자이로가 있는데 아직 우주 비행체 분야에서는 적용되지 못하고 있다. 그리고, 자이로의 큰 범주로 다루어지지는 않지만 자기력을 이용해서 회전체인 로터와 고정체인 플랫폼 사이에 기계식 접촉이 전혀 없는 새로운 시스템인 ESG 자이로도 일부 상용으로 생산되고 있다. 현재까지는 기계식 자이로의 정밀도 및 안정성이 광학식 자이로보다 우수하여 많이 사용되고 있지만 최근의 개발 추세로 보면 곧 광학식 자이로의 강세가 두드러질 것으로 보인다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.626-629
• /
• 2003

In this paper, a system that implementation of Biometric System Using RF-ID. We organize a certification system which the security is strengthened, the information is flowed out and the presentation will do the possibility not to be abused. The loss of the credit card and problems which there is many of forgery back are happening. To solve such problems, We organized the system to use after we stored a fingerprint data at RF Card and going through certification necessary formalities. Various research to be related uses this system and is predicted. The development to common use goods will be possible through a certification procedure.

• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.763-771
• /
• 1997

이규화몰리브덴 고온발열체의 제조공정을 개발하였다. 원료분말은 상용 MoSi$_{2}$분말이었으며 Bentonite, Si$_{3}$N$_{4}$, B, ThO$_{2}$를 각각 가소제와 첨가제로 사용하였다. 이들은 진공압출, 소결, 단자부 기계가공, U자형 성형, 용접 등의 과정을 거쳐 U자형 발열체로 제조되었다. 사용제품의 분석결과 최근 사용온도가 크게 증가된 것으로 알려진 190$0^{\circ}C$용 발열체는 다량(33wt%)의 W이 Mo을 치환하고 있는 것으로 나타났다. 발열체의 전기비저항은 겉보기 밀도가 증가함에 따라 급격하게 감소하는 경향을 보였으며 첨가물들의 영향은 미미하였다. 1400-1$600^{\circ}C$에서 용접한 경우 용접면에서의 전기비저항은 비용접부보다 낮았으며 용접온도가 증사함에 따라 감소하였다. 발열시험결과 제조된 발열체는 표면온도가 1$700^{\circ}C$이하에서는 문제가 없었으며 175$0^{\circ}C$ 이상의 온도에서는 원형의 융기가 표면에 발생하면서 급속하게 파괴되었다. 이 융기는 X-선 회절분석결과 SiO로 밝혀졌으며 따라서 발열체의 파괴는 MoSi$_{2}$/SiO$_{2}$계면에서의 Si(in MoSi$_{2}$) + SiO$_{2}$=2SiO(g)반응에 으해 일어나는 것으로 판단된다.

• The Journal of the Korea Contents Association
• /
• v.6 no.3
• /
• pp.63-74
• /
• 2006

Recently many ASP applications have been released which enable them to accept, save and manipulate files uploaded with a web browser. The files are uploaded via an HTML POST form using RFC 1867 In particular, the file transfer via the HTTP port is getting more important because of the current Internet security issues. In this paper, we implement a form-based ASP upload component and disclose explicitly most of the main codes. That is, the open source might be helpful to develop the new ASP applications including file upload function in the future. We also show the upload time and CPU usage time of the proposed upload component and compare with the well-known commercial ones, showing the performance metrics of the proposed component are comparable to those of commercial ones.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.419-427
• /
• 2013

The catalytic converters for automobile exhaust systems are manufactured by inserting a mat-wrapped substrate into a stainless steel can. A residual pressure that is too high will initiate a fracture in the substrate. In contrast, a residual pressure that is too low will fail to hold the substrate in the acceleration or deceleration phase. Both the process capability and mat pressure on the substrate are predicted while considering the effect of the statistical variation in the dimensions of the parts. The validity of the solutions is then confirmed. A program using EXCEL combines a finite element analysis and process capability analysis in one program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2353-2359
• /
• 2012

Today, the use of the open source software is rapidly increasing. But, it is also true that the quality aspect of the open source software is not being considered seriously enough. As we see, the future prospect of the open source software seems to demand the development of a set of quality assessment technology for the open source software due to the current status of quality problems and sustained growth in its usage. Therefore, in this study a set of open source assessment models are analyzed to establish evaluation criteria, with which the open source software are to be evaluated.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.102-110
• /
• 2007

In this paper, a portable RFID reader which operated in 900MHz UHF band is designed and fabricated and the characteristics of the manufactured portable RFID reader is analyzed through measurement. Analysis of measurements results is achieved based on EPC Class 0 standards that proposed by EPC Global. The proposed RFID reader communicate with tags about 11kbps speed, and have 20 dBm for its maximum RF output power. The proposed portable RFID reader can recognize maximum 68 tags per second, and when reader's output power is 20 dBms, maximum recognition distance is 30cm. And the total size of implemented RFID reader is $71mm{\times}55mm$, that is the maximum 90%, minimum 14% reduced size compared with marketed product.