• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.207-211
• /
• 2007

Many studies reported that the presence of cervical enamel projection (CEP) in cemento-enamel junction(CEJ) is greatly related to periodontal disease. The aim of this study was to investigate the prevalence of enamel projections in buccal, mesial, distal and lingual(palatal) surface of maxillary and mandibular first and second molars on extracted teeth. Among 660 teeth extracted due to the periodontal disease and dental caries in Seoul National University Dental Hospital was examined, 530 teeth which has distinct CEJ were examined with 8 times x electronic magnifier by one examiner. The prevalence of CEP for maxillary teeth (45.49%) was higher than that of mandible (39.62%). The first molar (45.22%) had more CEP than second (39.89%). Furthermore, buccal surface had highest incidence of CEP than other surfaces. The results of this study imply that the clinicians should take good care of the prevalence of CEP when scaling or root planning, plaque control instruction and periodontal surgery.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.182-195
• /
• 2005

The purpose of this retrospective study was to estimate the pretreatment characteristics of growing patients with Class II malocclusion. who had been treated with maxillary second molar extractions The sample comprised of 51 subjects; 18 subjects were classified into the molar extraction group, and 33 subjects were treated without extraction and classified into the nonextraction group. Pretreatment lateral cephalograms were calculated and analyzed by independent t-test and stepwise discriminant analysis. In measurements for skeletal pattern, no anteroposterior measurements and proportions of various vertical dimensions were significantly different. and only some measurements such as $AB-MP(^{\circ)$, Na-We(mm), AVD (mm) were significantly different between the two treatment groups (p<0.05). In measurements for dentoalveolar pattern. some measurements, which were related to the position and angulation of the upper and lower permanent first molars, and the angulation of the upper third molars, were significantly different between the two treatment groups In particular, the maxillary second molar extraction group exhibited more mesial angulation of maxillary first molar to the occlusal plane.

• Journal of dental hygiene science
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2008

The purpose of this study was to analyze the reasons and mean age for tooth extraction among patients living in Busan city. The researcher observed 1,119 patients' teeth extracted due to dental caries, periodontal disease and other reasons. This study examined the reasons for tooth extraction by age, sex, and tooth-kind. The reasons for tooth extraction were dental caries, periodontal disease, eruption problems and others. The obtained results were as follows; 1. Among the reasons for tooth extraction, dental caries accounted for 25.9%, periodontal disease 56.5%. 2. Periodontal disease was the main reason for tooth extraction and continued throughout life irrespective of sex. However dental caries was remarkably increasing in those aged 30 years old and under. 3. In the extraction of permanent teeth, males outnumbered females while upper teeth did lower teeth. 4. Although the third molars were most extracted in all kinds of teeth, the main reasons for the extraction were eruption problem. 5. The mean age of the tooth extracted was 47.9 years in both sexes for the mandibular first molars and the mandibular first molars had the shortest life except third molars of total teeth. The mandibular canines had the longest life of total teeth. Because dental caries and periodontal disease are the main causes of tooth extraction in Korea, the dental health policy should be focused on the prevention and treatment of these two diseases in the government level.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.352-358
• /
• 2021

Molar-incisor malformation (MIM) is characterized by malformation in the root with a normal crown. While MIM mostly occurs in the permanent first molar, it has also been reported in the maxillary central incisor and the primary second molar (PSM), but anatomical analysis of the primary teeth with MIM has not been studied to date. In this case report, a patient with MIM was reported, and an extracted PSM with MIM was analyzed with micro computed tomography (CT). A cervical constriction morphology of the cementoenamel junction (CEJ) can be observed in extracted PSM. In micro CT analysis, characteristics such a mineralized plate (cervical mineralized diaphragm) in the CEJ area, complex root canal morphologies, a calcified mass inside the pulp chamber, and constricted pulp chamber of crown portion were observed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.495-501
• /
• 2003

Impaction is defined as the cessation of the eruption of the tooth caused by a clinically or radiographically detectable physical barrier in the eruption path or by the ectopic position of tooth germ. Besides the third molars and the maxillary canines, the most common impacted tooth is the second premolar. The overall frequency of premolar impaction has been reported to be 0.5%. In some cases, orthodontic traction and surgical repositioning may be indicated. When impacted second premolar is involved with prolonged retained second primary molar, extraction of primary molar and space maintenance lead to eruption of second premolar. In these cases, all patients visited to department of pediatric dentistry of Kyungpook National University Hospital for the chief complaint of unerupted second premolar. Extraction of prolonged retained second primary molar and space management are tried for spontaneous eruption of impacted second premolar tooth. The results were as follows: 1. When impacted second premolar is involved with prolonged retained second primary molar, minimal treatment via elimination of primary molar leads to successful results. 2. Proper space management and periodic radiographic examination are required before eruption of second premolar. 3. Sufficient time must be allowed for confirm of tooth movement before orthodontic traction or surgical repositioning. 4. The result is more successful in incomplete root development.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.709-717
• /
• 2007

Impaction of maxillary incisor is rare than the third molar and canine, but its rate is higher than the other anterior teeth due to frequent mesiodens, trauma and variation of root formation (root dilaceration etc.). It is often observed in the dental age of about eight years and over. It will be occurred that the space loss, midline deviation and cyst formation due to the impaction of maxillary incisor. So it is important to evaluate the precise location of impacted tooth and to make appropriate treatment plan. Treatment would be surgical extraction or expectation for spontaneous eruption. If the impacted tooth has no pathologic change and development of the root is favorable, orthodontic traction is recommended for recovery of function and esthetics. In these cases, we performed orthodontic traction for the eruption of impacted maxillary incisors, and obtained satisfactory results.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.563-580
• /
• 1998

This study was designed to analysis the displacement and stress distribution of individual tooth by orthodontic force during distal on masse movement of the maxillary dentition. In this study, three dimensional finite element analysis was used. Author made the finite element model of maxillary teeth, periodontal ligament, alveolar bone and bracket with anatomic and physiologic characteristics on computer. Author analysed and evaluated the displacement and stress distribution of individual tooth when extraoral force, Class II intermaxillary elastics, ideal arch wire, MEAW and tip back bend were used for distal on masse movement of the maxillary dentition. These analyses were also applied in the case of the maxillary second molar were not extracted. Author compared the results of the cases which maxillary second molar were extracted or not. The results were expressed quantitatively and visually. Author obtained following results, 1. When anterior headgear was applied, the posterior translation, posterior tipping, and vertical displacement of teeth were produced more in the anterior segment of the dentition. 2. When Class II intermaxillary elastics were applied in the ideal arch wire, the teeth displacement were usually produced in the anterior segment. But when tip back bend were added in the ideal arch wire, the orthodontic force produced by elastics were transmitted to the posterior segment. As increasing the tip back bend, posterior translation and lingual tipping of anterior teeth were decreased, posterior translation and tipping displacement of posterior teeth were increased, and extrusion of anterior teeth by Class II elastics were decreased 3. When MDAW and Class II elastics were applied, the teeth movement were sir flu with the case of ideal arch wire and Class II elastics, but more small and uniform teeth displacement were produced Compared with the ideal arch wire, posterior tipping of the posterior segment were more produced than lingual tipping displacement of the anterior segment. 4. When the maxillary second molar without orthodontic appliance existed, the displacement of maxillary first molar were decreased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.139-145
• /
• 2002

In a primary teeth, dental caries is rapidly advanced the pulp disease, because the primary teeth have the thinner and the weaker enamel layer and the wider pulp chamber than relatively the permanent teeth. And the pulps of primary teeth are exposed during caries removal or even they are exposed by unexpected movement of the children or by trauma. For successive pulp treatment in primary teeth, it is necessary to understand completely about multiple canal morphology, variation of root canal anatomy and specific problem related to root formation and resorption of primary teeth. In upper primary molar, canal configuration of mesial root has the most variation same as upper molar. If not canal treatment is completely, most of all endodontic treatment should be failed. In a clinical case report, upper primary molars existed persistent pain or bleeding during treatment were founded the second MB canal and were performed the endodontic treatment of theirs. As a result, the upper primary molars have no symptom and good prognosis. In the examination of extracted upper primary molar, we found that 8 of 35 teeth(22.8%) in the upper primary first molars and 22 of 33 teeth(66.6%) in the upper primary second molar had the second mesiobuccal canal. It has revealed the high prevalence of two canals in mesiobuccal roots of upper primary molars. The frequency of occurrence of the second mesiobuccal canal must be taken into consideration when endodontic treatment is planned and as a possible cause of otherwise un explained failure.

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2001

통상적인 근관형성 과정에서 근관형태의 직선화 경향을 발견할 수 있으며, 그 결과 만곡이 심한 근관에서 이상적인 근관형태를 얻기가 어렵다. 이를 극복하기 위한 많은 기구들과 근관 성형법들이 개선되고 소개되었다. 본 연구에서는 최근에 개발된 직사각형의 단면을 가지는 stainless steel file인 RT file과 Flex-R file, K-file을 이용하여 만곡근관 형성 후 최종 근관형태를 비교하여 각 file을 평가하고자 한다. 본 실험은 Bramante등의 방법을 변형하여 술 전의 근관형태와 술 후의 근관형태를 비교하였다. Schneider의 방법을 변형하여 3차원적 만곡을 계산하여 12도에서 36도 이내에 만곡도를 가진 근관을 선택하였다. 49개의 발거된 상악대구치 협측근관이나 하악대구치 근심근관을 3개의 군으로 나누고 레진과 플라스틱으로 제작된 mold에 투명한 교정용 레진으로 매몰하였다. 근첨에서 2.5, 5, 8mm지점에서 절단하여 각 mold에서 재조립한 후 다음과 같이 근관형성을 시행하였다. 제 1군은 SS K-file을 이용하여 step-back 방법 ; 제 2군은 Flex-R file을 이용하여 balanced force 방법 ; 제 3군은 RT file을 이용하여 step-back 방법으로 근관 형성하였다. 술 전과 술 후에 각 시편들을 체현미경으로 사진촬영하여 근관 중심 위치 이동률, 근관형성으로 삭제된 상아질양, 근관형성 후 모양을 Sigma scan/ image software program으로 계산하고 One way ANOVA로 통계적 유의성을 검증하여 다음과 같은 결론을 얻었다. 1. RT file이 치근단에서 K-file보다 유의성 있게 근관의 중심을 유지하는 것으로 보였다. 치아 중앙부에서는 RT file과 Flex-R file이 K-file에 대해 유의성 있게 우수한 것으로 나타났다. 2. 근관형성 후 삭제된 상아질양에서는 치근단에서 RT file이 적게 나왔으나 유의성은 없었다. 3. 근관형성 후 절단면 모양은 원형, 타원형, 불규칙한 형태들이 다양하게 나타났고 각 군간에 유의성 있는 차이는 없었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.238-247
• /
• 2021

Congenital tooth agenesis is the most common developmental dental anomaly, of which oligodontia is defined as the absence of six or more permanent teeth, except the third molars. Tooth agenesis causes malocclusion, alveolar atrophy, aesthetic and psychosocial problems. This clinical report describes a multidisciplinary treatment for a patient diagnosed as oligodontia, who exhibited absence of 14 permanent teeth, atrophy of maxillary alveolar bone, and mandibular protrusion. Restoration space was secured and tooth axis was improved by the extraction of deciduous teeth and orthodontic treatment. However, edge-to-edge bite of posterior teeth and arch dimension discrepancy due to atrophic maxilla was remained. To restore the aesthetics and functionality, implant retained prosthesis was planned. Considering minimal bone grafts, location and number of dental implants and prostheses design were determined. Through the gradual adjustment of provisional restoration, the appropriate centric and eccentric occlusion was reflected into a definitive prosthesis. Currently, stable functional results were attained, however, regular follow up and maintenance care over lifetimes should be performed.