• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.141-151
• /
• 2016

Recently, technology for energy recovery from waste has been increasing interest globally including the Korea. In Korea, we have interested in using biogas generated from the sewage treatment process. As one alternative, there are operating biogas combined heat and power plant. The generation amount of the Sewage Sludge are expected to grow in the future. For this reason, total processing cost of Sewage Sludge will increase. To solve this problem, it seems will be invested with the expansion of facilities that use biogas as energy. Therefore, quantitative information on such facilities is required. Thus, this study attempts to economic feasibility analysis for Seonam Biogas Combined Heat and Power Plant. Meanwhile, as the benefit items for economic feasibility analysis consider electricity supply benefit except for heat supply benefit. The average prices of electricity use were residence 123.69, commercial 130.46, and industry 102.59 won per kWh for the year 2015, In addition, the economic benefit are calculated to be residence 310.21, commercial 378.49, and industry 222.87 won per kWh. The results of economic feasibility analysis is NPV 72.18 billion won, B/C 1.90, IRR 37%, shows that economic validity of Seonam Biogas Combined Heat and Power Plant.

• Journal of Yeungnam Medical Science
• /
• v.23 no.2
• /
• pp.171-181
• /
• 2006

Background: $Clonorchis$ $sinensis$ is an important human parasite that is usually found in the biliary tract. It is widely distributed in East Asia in Taiwan, Japan, China and Korea. About 2 million people are estimated to be infected with $C.$ $sinensis$ in Korea. This study was conducted to evaluate the state of infestation and clinical aspects of $C.$ $sinensis$. Material and Methods: We evaluate 1,063 patients with clonorchiasis retrospectively at Yeungnam University Hospital and Health Promotion Center from January 2001 to December 2003. All patients were diagnosed by a positive stool test for $C.$ $sinensis$ eggs. Clinical features, laboratory data and imaging studies were evaluated. Results: The ratio between affected males and females was 3.6 : 1. The highest infection rate was noted in the 40-60 age groups regardless of sex. The infection rate of $C.$ $sinensis$ among the residents of urban areas was higher than in rural areas. There were 813 (76.5%) patients who were asymptomatic. Common symptoms included right upper abdominal pain in 7.6% and epigastric pain in 7.2%. For the laboratory studies, serum ALP and GGT levels were within normal limits in 85.2% and 56.0% respectively. Peripheral eosinophilia was noted in 66.1% of cases. Of the 83 cases undergoing ERCP, 27 cases (32.5%) showed peripheral dilatation of the intrahepatic duct. Conclusion: This study suggests that $C.$ $sinensis$ infection is still endemic even in rural areas of Korea and that asymptomatic infections are common. Further work should be focused on the early diagnosis and treatment of patients with subclinical infection.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.109-114
• /
• 1997

Malignant hyperthermia is a hypermetabolic, fatal syndrome triggered by anesthetic drugs that occurs frequently in genetically susceptible persons. It is characterized by tachycardia, rapidly increasing temperature, skeletal muscle rigidity, respiratory and metabolic acidosis, cyanosis etc. It has been noted that the majority of cases of malignant hyperthermia are fatal unless early diagnosis and treatment are performed. Thus, the accurate prediction of preanesthetic susceptibility and early diagnosis of malignant hyperthermia is necessary to appropriate treatment. Dantrolene sodium has been shown to be effective in the prevention and treatment of malignant hyperthermia. We experienced a case of malignant hyperthermia, which is presented of a 32-year-old healthy male patient in whom a orthognatic surgery was performed under $O_2-N_2O$-enfl-rane anesthesia with induction by pentobarbital and succinylcholine. We discuss this case with reviewing the history, incidence, etiology, pathophysiology, clinical signs & biochemical changes, prevention & treatment.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2011

A chronic drought stress has been imposed during non-rainy season(from winter to spring) since 1990s. We faced the most significant water crisis in 2001, and the drought was characterized by sultry weather and severe drought on a national scale. It has been widely acknowledged that the drought related damage is 2-3 times serious than floods. In the list of the world's largest natural disaster compiled by NOAA, 4 of the top 5 disasters are droughts. And according to the analysis from the NDMC report, the drought has the highest annual average damage among all the disasters. There was a very serious impact on the economic such as rising consumer price during the 2001 spring drought in Korea. There has been flood prevention measures implemented at national-level but for mitigation of droughts, there are only plans aimed at emergency (short-term) restoration rather than the comprehensive preventive measures. In addition, there is a lack of a clear set of indicators to express drought situation objectively, and therefore it is important and urgent to begin a systematic study. In this study, a nonstationary downscaling model using RCM based climate change scenario was first applied to simulate precipitation, and the simulated precipitation data was used to derive Standardized Precipitation Index (SPI). The SPI under climate change was used to evaluate the spatio-temporal variability of drought through principal component analysis at three different time scales which are 2015, 2045 and 2075. It was found that spatio-temporal variability is likely to modulate with climate change.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.121-130
• /
• 2011

Real option values of early termination payment for selected BTO PPI projects are studied using binomial models. Two cases of early termination payments are considered; an option with the condition of private participants' default, and an option without the condition. Values vary depending upon parameter values such as revenues, costs, discount rates, debt ratio, and volatility of revenues. For selected projects, the option values without the default condition are estimated as 1%~7% of total project costs, whereas the option values with the default condition are estimated as 0%~1.89% of total project cost. When actual revenues differ from the forecasted revenues, apparently the option values deviate from the values based upon the forecasted revenues. When actual revenues fall short of the forecasted revenues, the option values increase by a large amount whereas the option values decrease by a small amount in the opposite case. This implies that the option values can be quite bigger than the values based upon the forecasted revenue especially when the revenue forecast uncertainty is large. This study is expected to play an important role in improving the early termination payment option policy of the government in PPI projects in Korea.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.3-11
• /
• 2004

The power loss analysis was carried out for Ni-Cu-Zn ferrite samples with different content of NiO and ZnO. The power loss, Pcv decreases monotonically wi increasing temperature and attains to a certain value at around $100\~120$ degrees Celsius. The frequency dependence of Pcv can be explained by $Pcv\~f^n$', and n is independent of the frequency, f up to 1MHz. The Pcv decreases with an increase in ZnO/NiO. The Pcv was separated to hysteresis loss, Ph and residual loss, (Pcv-Ph). The temperature characteristics and compositional dependence of Pcv can be attributed to the Ph, while (Pcv-Ph) is not affected by both temperature and ZnO/NiO. By analyzing temperature and composition dependence of Ph and initial permeability, ${\mu}^i$ following equations could be formularized. $${\mu}_i{\mu}o=I_x\;^2/(K_1+bs_ol_s)\;\;\;\;(1)$$ $Wh=13.5(I_s\;^2/{\mu}_i{\mu}_o)\;\;\;\;(2)$$ Were ${\mu}_o$ is permeability of vacuum, $I_s$ saturation magnetization, $K_1$ anisotropy constant, $S_o$ internal heterogeneous stress, $I_s$, magnetostriction constant, b unknown constant. Wh hysteresis loss per one cycle of excitation (Ph: Wh*f). Steinmetz constant of Ni-Cu-Zn ferrites, $m=1.64\~2.2$ is smaller than the one of Mn-Zn ferrites, which suggests the difference of loss mechanism between these materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.526-535
• /
• 2018

Recently, in order to reduce the $CO_2$ emission in the island area, countermeasures to operate power system in a stable manner are being researched due to decrease of the operation rate in diesel generators and the increase of renewable energy sources. The phenomenon of energy sinking can be occurred if the output of renewable energy sources is larger than customer loads. Voltage of CVCF(constant voltage & constant frequency) battery could be increased rapidly according to the condition of SOC(state of charge) and blackout could be occurred due to shut-down of CVCF inverter, at carbon free island micro-grid based on the CVCF inverter. In order to overcome these problems, this paper proposes a transient operation algorithm in CVCF based micro-grid which in advance prevents shut-down of CVCF inverter during the energy sinking. And also this paper proposes the modeling of micro-grid including CVCF inverter, PV system, customer load using PSCAD/EMTDC S/W. From the results of micro-grid modeling based on the proposed algorithm, it is confirmed that CVCF based micro-grid can properly prevent shut-down of CVCF inverter according to SOC and battery voltage of CVCF inverter when energy sinking is occurred.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.604-609
• /
• 2020

There are various methods of finishing concrete surfaces, and when considering workability, the spray method is effective, but rebound occurs. The allocation of rebound occurrence control should be adjusted according to the materials used. Thus, a basic study was conducted on multiple techniques for reducing the rebound incidence that are suitable for surface finishing materials containing a photocatalyst. A prior study derived the reduction effect and optimal mix ratio for photocatalytic performance. Based on that study, the rebound reduction was verified according to the specifications of the content and the mechanical durability characteristics of the mixed materials. Rebound, compressive strength, flexural rigidity, and table flow tests were done. The flow was fixed at 170±10 mm considering the workability of the mortar spray equipment. For the experimental variables, the rebound number was adjusted to the silica sand variables relative to the cement weight, and silica sands No. 5 and No. 7 were used. The results show the highest compression strength in the final S-1 variable, and the amount of rebound was minimized. These results were sufficiently filled with the bindings of the silica pores, which increased the binding force between the aggregates, resulting in a lower amount of rebound.

• The Korean Journal of Financial Management
• /
• v.21 no.1
• /
• pp.33-58
• /
• 2004

This paper tests Van Home's hypothesis, a negative correlation between degrees of operating leverage(DOL) and financial leverage(DFL). For an empirical analysis, we extract information from financial statements of manufacturing companies listed in the Korea Stock Exchange. Data extend from 1980 to 2001. The DOL continued to increase until 1997, but decreased dramatically after the IMF financial crisis. However, the DOL has been at a higher level than companies of other countries such as USA and Japan. The DFL has been maintained at a much higher level, as expected. The empirical results indicate a positive correlation between the DOL and the DFL, which is inconsistent with the VanHorne's hypothesis. To further investigate, we divide the whole sample into subgroups according to such management elements as asset size, level of leverages, earnings and cash flow. The results for sub-samples are different from those of whole sample. This indicates we need to incorporate specific managerial factors in order to correctly explain financial decision processes.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.877-882
• /
• 2013

The application of ultrafiltration (UF) and microfiltration (MF) membranes has been increased for drinking water purification. The advantages of UF/MF membrane process compared to conventional treatment processes are stable operation under varying feed water quality, smaller construction area, and automatic operation. Most membrane treatment plants are designed with polymeric membranes. Recently, some studies suggested that the process of treating surface water with ceramic membranes is competitive to the application of polymeric membranes. Higher water flux, less frequent cleaning, and much longer lifetime are the advantages of ceramic membrane comparing to polymeric membrane. Therefore, this research focused on the application of ceramic MF membrane pilot plant at the slow sand filtration plant. The ceramic membrane pilot plant has three trains that used raw water and sand filtered water as a feed water, respectively. For optimizing the pilot plant process, the coagulation with PACl coagulant was used as a pretreatment of ceramic membrane process. In addition, CEB (Chemical Enhanced Backwash) process using $H_2SO_4$ and NaOCl was used for 1.5 days, respectively. The experimental results showed that applying the optimum coagulant dose before membrane filtration showed enhancing membrane fluxes for both raw water and sand filtered water. Also, when using raw water as a feed of membrane, minimum fouling rate was 2.173 kPa/cycle with 25 mg/L of PACl and when using sand filtered water, the minimum fouling rate was 0.301 kPa/cycle with 5 mg/L of PACl.