• Title/Summary/Keyword: 상수처리

Search Result 849, Processing Time 0.031 seconds

Influence of Gibberellin and Urea treatment on the Production of mulberry leaf and characteristic of silkworm (지베렐린과 요소의 처리가 상수의 수량 및 잠아의 실용형질에 미치는 영향)

  • 유근섭;오준식
    • Journal of Sericultural and Entomological Science
    • /
    • v.9
    • /
    • pp.27-34
    • /
    • 1969
  • This study was conducted investigate the effect of Gibberellin and Urea on the growth of mulberry tree with the compound treatment, and the characteristic of silkworm when the mulberry leaves simply treated with GB and the compound treatment with GB and Urea were supplied. The results are as follows. 1. Mulberry tree A. The leaf weight per mulberry tree with the compound treatment of GB+ Urea was heavier in spring silkworm and the leaf yield was increased by 7% compared with the non-treatment plot. B. The growth of wattle, leaf length and leaf width was more accelerated in the compound treatment plot of GB+Urea, the single treatment plot of GB and Urea than th!: non-treatment plot in autumn silkworm, and there was observed an incredse yielding effect of 16% in GB+Urea plot, in 16% GB plot and 18% in Urea plot respectively as compared with th: non-treatment plot, hut yield per l000m unit of wattle length was the least in GB plot. C. In the composition of mulberry leaves of treatment, water and crude protein was increased in the compound treatment plot of GB + Urea and the single treatment plot of GB and Urea than the non-treatment plot, but dry matter and carbohydrate were decredsed. 2. Characteristics of Larva in spring silkworm A. The mortality ratio of 4 and 5 instar plot was equally high in the compound treatment plot of GB+ Urea and the pupation ratio of 4 instar plot was lower than other treatment plot. B. Although there was no significant difference observed in the cocoon weight of 10.000 1st-day worms in both 4 and 5 instar plots between each treatment plot, the single treatment plot of GB showed somewhat great than other treatment plots. C. There was no significant difference observed in the cocoon layer ratio between each treatment plot, but 4 instar plots was slightly higher than 5 instar plots. 3. Characteristics of Larva in Autumn silkworm A. The mortality ratio of the compound treatment plot of GB+ Urea and GB was higher than that of the nontreatment and single treatment plot of Urea. B. The pupation ratio of the single treatment plot of Urea was higher than that of the compound treatment plot of GB + Urea, and there was no significant difference observed between other treatment plot. C. The cocoon weight of 10.000 1st-day th instar worms was heavier in the single treatment plot of Urea than nontreatment plot, GB+Urea plot and GB plot. D. The cocoon layer ratio was no significant difference observed between each-treatment.

  • PDF

Low Area and High Performance Multi-mode 1D Transform Block Design for HEVC (HEVC를 위한 저면적 고성능 다중 모드 1D 변환 블록 설계)

  • Kim, Ki-Hyun;Ryoo, Kwang-Ki
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.1
    • /
    • pp.78-83
    • /
    • 2014
  • This paper suggest an effective idea to implement an low area multi-mode one dimension transform block of HEVC(High Efficiency Video Coding). The time consuming multiplier path is designed to operate on low frequency. Normal multipliers dealing with variable operands are replaced with smaller constant multipliers which do the product with constant coefficient and variable only using shifters and adders. This scheme increases total multiplier counts but entire areas are reduced owing to smaller area of constant multiplier. Idle cycles caused by doubled multipliers enable to use multi-cycle paths on the cycle eating multiplier data path. Operating frequency is lowered by multi-cycle path but total throughput is maintained. This structure is implemented with TSMC 0.18 CMOS process library, and operated on 186MHz frequency to process a 4k($3840{\times}2160$) image. Max operating frequency is 300MHz.

A Study on the Digital Map Production and Water Supply management in GIS (GIS에 의한 수치지도 제작과 상수도 관리에 관한 연구)

  • 강준묵;윤희천;한승희
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.11 no.2
    • /
    • pp.59-67
    • /
    • 1993
  • Since society rapidly change, we need accurate and rapid information. Due to complication and rapid change of national infrastructure system, we meet a limitation of 2-D information management. Currently most digital cartographic data is acquired by manual digitizing with a tablet. Recently high cost scanner is widely used and preprocessing and postprocessing software of scanning are developed, so we expect its availability. In this study, we know that scanning is more convenient than digitizing with a tablet for digital mapping, also, possibility of 3-D modeling of vectorized document is suggested. Because information rapidly provided in the planning and implementation, operation efficiency and advance are archived in water supply project. Improvement of service for need of citizen and possibility combined information system connected with other system is presented.

  • PDF

Air detector using the change of dielectric constant for medical applications (의료분야 응용을 위한 유전상수 변화를 이용한 공기감지 장치)

  • Kim, Kyung-Hwa;Shim, Joon-Hwan
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.34 no.6
    • /
    • pp.864-870
    • /
    • 2010
  • Air embolism can be a lethal complication of surgical procedures during which venous pressure at the site of surgery is sub-atmospheric or air is forced under pressure into a body cavity. To solve the problem, we developed the air detector using relative dielectric constant change, which is expected to be used broadly in industrial circles. We designed air detection system with air control equipment, detection circuit and LabVIEW system for air sensing. In experiments with a mock system, the proposed system showed a signal difference depending on the amount of air in the Tygon tube of the mock system.

Effects of Temperature on Flocculation Kinetics Using Fe(III) Coagulant in Water Treatment (정수처리시 Fe(III) 응집제를 사용한 응집동력학에 대한 온도의 영향)

  • 강임석
    • Journal of Environmental Science International
    • /
    • v.4 no.2
    • /
    • pp.181-194
    • /
    • 1995
  • Flocculation kinetics using ferric nitrate as a coagulant to coagulate kaolin clay in water was examined as a tool to investigate the effect of low temperature under tightly controlled treatment conditions. Both the particle size distribution data obtained from Automatic Image Analysis (AIA) system and the on-line measurement of the degree of turbidity fluctuation in a flowing suspension by Photometric Dispersion Analyzer (PDA) were used to measure flocculation kinetics. Results show that cold water temperature had a pronounced detrimental effect on flocculation kinetics. For improving flocculation kinetics at low water temperature, maintaining constant pOH to adjust water chemistry for temperature changes was found to be partially effective only in the more acidic pH range studied.

  • PDF

High Speed Wavelet Algorithm for Computation Reduction of Adaptive Signal Processing (적응신호처리의 계산량감소에 적합한 고속웨이블렛 알고리즘에 관한연구)

  • 오신범;이채욱
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.7 no.4
    • /
    • pp.17-21
    • /
    • 2002
  • Least mean square(LMS) algorithm one of the most popular algorithm in adaptive signal processing because of the simplicity and the small computation. But the convergence speed of time domain adaptive algorithm is slow when the spread width of eigen values is wide. Moreover we have to choose the step size well for convergency. in this paper, ie use adaptive algorithm of wavelet transform. And we propose a new wavelet based adaptive algorithm of wavelet transform. And we propose a high speed wavelet based adaptive algorithm with variable step size, which is linear to absolute value of error signal. We applied this algorithm to adaptive noise canceler. Simulation results are presented to compare the performance of the proposed algorithm with the usual algorithms.

  • PDF

마그네트론 스퍼터링법을 이용하여 증착한 Sn doped IZO 박막의 열전 특성

  • Byeon, Ja-Yeong;Song, Pung-Geun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.253-253
    • /
    • 2016
  • 최근 세계적으로 대체 에너지는 중요한 이슈가 되고 있으며 그 중 열전 재료는 유망한 에너지 기술로서 주목 받고 있다. 특히 고 직접화 전자 소자의 발열 문제를 해결하기 위해, 소형화와 정밀 온도 제어가 가능한 박막형 열전 소자에 연구가 주목 받고 있다. 박막형 열전소자 중 산화물 반도체계에 대한 연구가 활발히 진행되고 있으며, 이러한 산화물 반도체계 중 In2O3는 BiTe, PbTe 등의 기존의 재료에 비해 독성이 낮을 뿐만 아니라 내 산화성 및 고온에서 열적 안정성이 우수하여 고온에서 적용 불가능한 금속계 열전 재료의 한계를 극복 할 수 있다는 장점을 가진다. 우수한 성능 가장 낮은 캐리어 밀도를 가지기 때문에 의 열전 재료는 높은 전기 전도도 및 제백 계수 그리고 낮은 열전도도 특성을 가져야만 한다. IZO:Sn(Zn 10 wt.%, Sn 800 ppm) 박막의 경우, 높은 전기 전도성을 가지면서 비정질 구조를 가진다. 이와 같이 비정질 구조를 가지는 박막 열전 재료는 격자에 의한 열 전도도가 낮기 때문에 결정질 구조에 비해 전체 열 전도도 값이 낮을 것으로 기대된다. 따라서 높은 전기 전도도를 가지면서 동시에 낮은 열 전도도를 가지게 되어 우수한 열전 특성을 가질 것이라 예상된다. 이러한 특성을 바탕으로 본 연구에서는 비정질 구조를 갖는 Zn와 미량의 Sn을 동시에 첨가한 In2O3박막의 전기적 특성및 열전 특성을 관찰하고자 한다. 본 연구에서는 magnetron sputtering법으로 IZO:Sn(Zn 10 wt.%, Sn 800 ppm) 타깃을 이용하여 기판 가열없이 DC Power 70 W, 작업 압력 0.7 Pa으로 SiO2 기판 위에 $400{\pm}20nm$ 두께의 박막을 증착하였다. 이러한 공정으로 만들어진 박막은 대기 중 후 열처리를 각각의 200, 300, 400, 500, $600^{\circ}C$ 온도에서 진행하였다. 박막의 미세 구조는 XRD를 통해 관찰하였다. 그리고 박막의 전기적 특성은 Hall effect measurement을 통해 측정하였고, 열전 특성은 Seebeck 상수의 측정을 통하여 평가하였다. XRD 확인 결과 RT에서 증착한 박막과 후 열처리 200, 300, 400, $500^{\circ}C$ 결과 비정질 구조를 보였고, 후열처리 $600^{\circ}C$에서는 결정의 회절 피크를 보였다. 전기적 특성의 경우, 후 열처리 온도가 증가함에 따라 전기 전도도는 감소한다. 이는 공기중의 산소가 박막에 침투하여 oxygen vacancy를 막아 캐리어 밀도가 감소한것에 기인 된 것으로 판단된다. 열전 특성의 경우 제백상수는 후 열처리 $600^{\circ}C$에서 가장 높은 제백상수를 나타낸다. 제백 상수는 수식에 따라 캐리어 밀도의 -2/3승에 비례하게 된다. 수식에 따라 후 열처리 $600^{\circ}C$에서 가장 낮은 캐리어 밀도를 가지기 때문에 가장 높은 제백 상수를 가지게 된다. 열전 성능 척도인 Power factor는 제백 상수의 제곱과 전기전도도의 곱으로 나타내는데, 후 열처리 $200^{\circ}C$에서 가장 높은 Power factor를 보인다. 이는 캐리어 밀도 감소에 따라 전기 전도도는 감소하였지만 이로 인해 제백상수는 증가하였고, 또한 캐리어 밀도 감소에 따라 이온화 불순물 산란의 감소에 의해 이동도의 증가에 의한 것으로 판단된다. 박막의 경우 기판의 영향으로 인해 열 전도도 측정이 어려워 열전 성능 지수(ZT)를 계산을 할 수 없지만, 마그네트론 스퍼터링법으로 증착한 IZO:Sn 박막은 비정질 구조를 가지므로 격자진동에 의한 열 전도도가 낮아 전체 열 전도도가 결정질에 비해 낮을 것이며 이는 높은 열전 성능 지수를 가질 것으로 예상된다.

  • PDF

환경관련 특허동향 - 화장실의 중수도 시스템(해성엔지니어링)

  • 한국환경기술인연합회
    • Environmental engineer
    • /
    • s.328
    • /
    • pp.92-96
    • /
    • 2013
  • 본 발명은 화장실의 세면대에서 사용된 세척수 및 하수를 중수도 수질기준에 적합하도록 처리하여 화장실 용수로 재활용하는 화장실의 중수도 시스템에 관한 것이다. 화장실의 중수도 시스템의 구성을 살펴보면, 세면대에서 사용된 세척수 및 하수가 유입되는 반응조와, 상기 반응조로 유입된 세척수 및 하수를 살균 및 소독하는 마이크로버블 오존 발생장치와, 살균 및 소독된 처리수를 정장하는 처리수조와, 상기 처리수조에 저장된 처리수를 화장실 용수로 공급하는 용수공급펌프를 포함한다. 이 중에서 상기 마이크로버블 오존 발생장치는, 외부에서 유입된 공기를 정화하는 에어필터와, 상기 에어필터에서 정화된 공기를 공급하는 에어펌프와, 상기 에어펌프를 통해 유입된 공기에 자외선을 조사하여 오존을 발생시키는 오존발생기와, 상기 오존발생기에서 발생된 오존을 세척수 및 하수에 혼합시키는 기액혼합펌프와 상기 오존과 상기 세척수 및 상기 하수의 혼합 효과를 극대화하기 위한 라인믹서로 구성된다. 이와 같이 구성된 본 발명에 의한 화장실의 중수도 시스템은 상수(上水)의 소비량을 줄이고 하수(下水)의 발생량을 감소시켜 경비절감의 효과를 얻을 수 있고, 지하수의 고갈 및 생활용수의 증가에 따른 물 부족 현상에 대해 능동적으로 대처할 수 있다. 특히, 재활용된 화장실 용수에는 오존이 함유되어 화장실 내의 악취제거, 살균 및 소독효과가 있으며, 외부로 배출되는 세척수 및 하수에 포함된 유지성분을 제거하여 환경오염을 방지할 수 있다.

  • PDF

Occurrence of Residual Pharmaceuticals and Fate, Residue and Toxic Effect in Drinking Water Resources (상수원에서의 잔류 의약물질 검출, 거동, 분포 현황 및 독성)

  • Son, Hee-Jong;Jang, Seong-Ho
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.33 no.6
    • /
    • pp.453-479
    • /
    • 2011
  • Residual pharmaceutical compounds have been recognized as emerging environmental pollutants and are widely distributed all over the world. These compounds cause bioaccumulation and biomagnification during present for a long time in the environment: thereby after adversely biota and human bodies. It is difficult to remove residual pharmaceutical compounds using conventional water/wastewater treatment because of resistant property to photodegradation, biodegradation and chemical decomposition. Moreover, domestic literature data on the pollution of residual pharmaceutical compounds in rivers and lakes are limited. In this paper, species, sources, fate and risk of residual pharmaceutical compounds as well as behavior properties in freshwater resources are demonstrated to encourage the domestic concern about residual pharmaceutical compounds. An extensive review of existing data in the form of figures and tables, encompassing many therapeutic classes are presented.