• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1158-1167
• /
• 1995

In this study, the dynamic instabilities of a beam, subjected to periodic short impulsive loading, are investigated using simple 2-DoF beam model. The behaviors of beam model whose axial motions are constrained are studied for the case of elastic and elastic-plastic behavior. In the case of elastic behavior, the chaotic responses due to the periodic pulse are identified, and the characteristics of the behavior are analysed by investigating the fractal attractors in the Poincare map. The short-term and long-term responses of the beam are unpredictable because of the extreme sensitivities to parameters, a hallmark of chaotic response. In the case of elastic-plastic behavior, the responses are governed by the plastic strains which occur continuously and irregularly as time increases. Thus the characteristics of the response behavior change continuously due to the plastic strain increments, and are unpredictable as well as the elastic case.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.52-66
• /
• 1998

An experimental study on the flow characteristics was performed for a two-dimensional turbulent wall attaching offset jet at different oblique angles to a surface. The flow characteristics were investigated by using a split film probe with the modified Stock's calibration method. The jet mean velocity, turbulent intensity, wall static pressure coefficient profiles, and time-averaged reattachment point were measured at the Reynolds number Re (based on the nozzle width, D) ranging from 17700 to 53200, the offset ratio H/D from 2.5 to 10, and the inclined angle .alpha. from 0.deg. C to 40.deg. C. The Correlations between the maximum pressure position, minimum pressure position, and reattachment point and offset ratios, and inclined angles are presented.

• 소음진동
• /
• 제6권6호
• /
• pp.755-762
• /
• 1996

An acoustic transmission loss analysis method for mufflers with complex geometry is developed using MSC/NASTRAN on the basis of acoustic-structural analogy and two-microphone method. In this study, mufflers with simple and complex shapes are analyzed using this method and compared with theoretical and experimental results to verify it. Applying this method to design of discharge muffler in a rotary compressor, we obtained 2dB(A) of noise reduction in the range of lower than 1300Hz. Futhermore, adopting this technique for a suction muffler in reciprocal compressor, more than 10dB(A) noise reduction at 500Hz, and in total, 3dB(A) noise reduction is achieved.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.103-110
• /
• 1997

The objective of this study is to provide the information on the small-scale model mix proportion when the behavior of prototype concrete pavement is studied through small-scale model experiments. However it is difficult to obtain a model material to simulate the prototype concrete by scaling the individual components according to the laws of similitude. In this paper, the stress-strain behavior in uniaxial compression is used as a means to correlate materials similitude between the prototype and the model concrete. Based on th results of experiments, We compared the stress-strain curves of prototype and model concrete mixes using a nondimensional basis. In order to simulate the stress-strain curves of prototype concrete, it is important that various mix as of model concrete selected properly which are varied from aggregate grading, cement-aggregate and sand-aggregate ratio.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.483-487
• /
• 2011

In the present study, a CFD program based on a finite volume method was developed by using an unstructured polyhedral grid system for the accurate simulation with the complex geometry of computational domain. To simulate the transient flow induced by the moving solid object, the program used a fractional step method and a ALE (Algebric Lagrangian-Eulerian) method. The grid deformation for the moving of solid object were performed with a spring analogy based on the center coordinate of each computational grid. To verify the present program with these methodologies, the numerical results of the flow around the fixed and oscillating circular cylinder were compared with the previous numerical results.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.33-48
• /
• 2009

In the present study, a fast grid deformation technique has been incorporated into the unsteady compressible and incompressible viscous flow solvers on unstructured hybrid meshes. An algebraic method based on the basis decomposition of normal edge vector was used for the deformation of viscous elements, and a ball-vertex spring analogy was adopted for inviscid elements among several spring analogy methods due to its robustness. The present method was validated by comparing the results obtained from the grid deformation and the rigid motion of entire grids. Fish swimming motion of an NACA0012 airfoil and flapping wing motion of a generic fighter were also simulated to demonstrate the robustness of the present grid deformation technique.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.513-518
• /
• 1999

In this study, geometrical similarity conditions for drills of various diameters are discussed. The effect of geometrical similarity on the chip shape and forces of different sized conventional drills has been experimentally confirmed. Drilling tests are carried out for SM45C by using the conventional HSS drills. The torque and thrust forces are measured and compared with those chip forms. Chip shape in drilling are affected by three factors being flow angle, side and up curl of the chip. It is found that the feedrate and drill diameter are more affected than cutting speed on the chip form and cutting forces. The similarity conditions gives easily to estimate the chip shape, the thrust and the torque for drills of different diameters.

• 통상정보연구
• /
• 제10권4호
• /
• pp.3-21
• /
• 2008

This study analyzed the effect of degree of using online trade process services provided by e-Trade companies on the degree of user satisfaction and the online export performance in Korean small and medium-sized exporting firms(SMEs). According to the empirical survey results based on 130 sample firms, there were positive relationship among the frequency of using e-Trade companies' services, the degree of user satisfaction and the online export performance. Furthermore, the results of the moderated regression analysis showed that there were significant moderation effect of the organizational characteristics on the relationships between the degree of user satisfaction and the SMEs' online export performances. This study provides several useful implications to Korean SMEs, e-Trade companies and government policy makers.

• 한국유체기계학회 논문집
• /
• 제13권6호
• /
• pp.13-18
• /
• 2010

The programs of grid generation and flow analysis for the 3-D flow field. were developed. The finer results from numerical analysis could be obtained by using developed programs than those of the experimental data in the flow field of the circular nozzle exit region. Especially A virtual-origin of 3.2 times of nozzle diameter within three percent error inside from nozzle exit plane could be obtained.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.2120-2124
• /
• 2007

본 연구에서는 천해역에서 수평 방향으로 방류되는 비부력 원형 난류제트에 대한 수리모형실험을 수행하여, 파랑이 제트의 확산에 미치는 영향을 검토하였다. 수리모형실험시 대상 파랑은 진폭이 작은 규칙파를 적용하였으며, 난류제트의 순간적인 유속장은 입자화상유속계(particle image velocimetry, PIV)기법을 이용하여 측정하였다. 평균유속장은 PIV기법으로 측정된 순간유속장을 위상평균하여 계산하였으며, 파의 진폭을 변화시키며 실험을 수행하였고, 파의 진폭변화에 따른 제트의 유속분포로부터 제트의 중심선과 제트단면을 추정하였다. 제트의 중심선속도는 파의 진폭이 증가함에 따라 중심선속도의 감소 시점이 빨라졌으며, 제트의 횡단면분포의 고유특성인 자기상사성(self-similarity)이 단계적으로 사라졌다. 제트 중심선의 속도와 제트 유속 단면은 제트의 확산정도를 알 수 있는 중요한 인자로서 파랑 진폭의 크기에 따른 이들 인자의 변화로부터 파랑의 분산이 난류제트의 확산현상에 미치는 영향을 알 수 있었다.