• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.333-336
• /
• 2000

본 논문에서는 Monte-Carlo simulation과 deterministic simulation을 합성한 방법으로 특성허용 패턴을 만족하는 개별소자의 오차범위를 가중치에 따라 차별적으로 규정을 하였다. 일반적으로 사용되는 통계적인 방법은 불규칙한 특성을 갖는 랜덤오차를 정규분포를 갖는 랜덤변수로 모델링을 하여 허용 패턴으로부터 오차의 범위를 규정하는데, 이렇게 구해진 범위는 개별소자의 가중치의 영향을 고려하지 않고 일률적인 특성을 나타낸다는 단점이 있다. 이에 반해 deterministic simulation을 통해서 얻어진 오차의 범위는 가중치에 따라서 상대적인 범위를 결정할 수 있지만 해석 하고자하는 배열소자의 개수에 따라서 계산량이 지수승으로 증가하는 단점이 있어 10개 이상의 소자를 갖는 배열에는 적합하지 않다. 이러한 단점을 보완하기 위해서는 본 논문에서는 Monte-Carlo simulation과 deterministic simulation의 합성적 방법을 사용해서 배열소자의 증가에 따른 계산량의 증가를 줄이면서 각 가충치에 따라 상대적인 개별오차의 허용범위를 결정하였다. 그리고 이렇게 규정된 오차의 범위를 간단한 모의 실험을 통해서 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2520-2527
• /
• 2015

Position information is important to carry out military operations. In general, GPS is used to estimate position. However, GPS is vulnerable to jamming due to the low received signal strength, therefore GPS can be easily jammed. The relative navigation is an auxiliary navigation system defined in JTIDS. When GPS is jammed, the relative navigation requires ground reference units on the ground to operate accurately. If the ground reference unit does not exist, nodes operated by the relative navigation depend on the inertial navigation system to identify their position. However, this positioning scheme based on only INS causes accumulative position error, therefore the nodes cannot identify their position accurately for a long time. In this paper, we propose an alternative to reduce position error generated by depending inertial navigation system. In order to verify that the performance of proposed scheme is better than that of the existing scheme, various simulations are conducted.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.106-114
• /
• 1992

Abstract-Quantitative surface analysis of Co-Ni and Au-Cu alloys by XPS and SIMS was studied. For Co-Ni alloy, quantitative XPS analysis could be done within 1-2% relative error with pure element standards without any correction. For Au-Cu, quantitative XPS analysis was not possible without any correction. But it could be done with standard alloys of various composition within 1-2% relative error. Without standard alloys, Au-Cu alloys could be analyzed by XPS within 10% relative error with pure element standards. For SIMS analysis of Co-Ni alloys, the relative secondary ion yields of Co+/Nit has linear relation with ratio of each composition so that quantitative SIMS analysis was possible for Co-Ni alloys. Preliminary results of XPS round robin test of VAMAS-SCA Japan Project are given.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.529-536
• /
• 2008

Researches about 3-D Positioning system using GPS were carried out many-sided by national organs, laboratories, the worlds of science. And most of researches were development of relative positioning algorithm and its applications. Relative positioning has a merit, which can eliminate error in received signals. But its error increase due to distance of baseline. GPS absolute positioning is a method that decides the position independently by the signals from the GPS satellites which are received by a receiver at a certain position. And it is necessary to correct various kinds of error(clock error, effect of ionosphere and troposphere, multi-path etc.). In this study, results of PPP(Precise Point Positioning) used Bernese GPS software was compared with notified coordinates by the NGII(National Geographic Information Institute) in order to analyze the positional accuracy of permanent GPS sites. And the results were compared with results of AUSPOS - Online GPS Processing Service for comparison with relative positioning.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.111-121
• /
• 2007

The GPS positioning offer 3D position using code and carrier phase measurements, but the user can obtain the precise accuracy positioning using carrier phase in Real Time Kinematic(RTK). The main problem, which RTK have to overcome, is the necessary to have a reference station(RS) when using RTK should be generally no more than 10km on average, which is significantly different from DGPS, where distances to RS can exceed several hundred kilometers. The accuracy of today's RTK is limited by the distance dependent errors from orbit, ionosphere and troposphere as well as station dependent influences like multipath and antenna phase center variations. For these reasons, the author proposes Network based GPS Carrier Phase Differential Positioning using Multiple RS which is detached from user receiver about 30km. An important part of the proposed system is algorithm and software development, named DAUNet. The main process is corrections computation, corrections interpolation and searching for the integer ambiguity. Corrections computation of satellite by satellite and epoch by epoch at each reference station are calculated by a Functional model and Stochastic model based on a linear combination algorithm and corrections interpolation at user receiver are used by area correction parameters. As results, the users can obtain the cm-level positioning.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.60
• /
• pp.3-10
• /
• 2006

한국의 전파연구소와 일본의 정보통신연구기구는 휴대전화와 같은 이동통신기기로부터 방사되는 전자파가 인체에 흡수되는 에너지 정도를 측정하는 전자파 흡수율(SAR) 평가에 대한 오차 연구를 공동으로 수행하고 있다. 본 논문에서는 동종의 SAR 시스템에서 프로브, 교정용 도파관 및 기준 다이폴 안테나를 상호 교체하여 교정하여 프로브의 교정인자를 구하고 유효성 검사를 통하여 교정 오차를 검증하였다. 프로브 교정에 대한 상호 오차는 0.2 dB 이하의 결과를 얻었으며, 유효성 오차는 최대 0.28 dB를 얻었다. 그러나 SAR 외삽 알고리즘이 다를 경우는 최대 0.48 dB의 상대 오차를 보였다.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.315-324
• /
• 2003

Stream flow data was analyzed for determining the lowflow which is the standard for river maintenance flow. Lowflow quantiles were estimated based on the parametric and nonparametric methods and two methods were compared by Monte Carlo simulation study. As the results of the parametric method, three probability distributions such as gamma-2, lognormal-2 and Weibull-2, are selected as appropriate models for stream flow data of 13 stations in Han River Basins. According to simulation results, relative bias (RBIAS) and relative root mean square error (RRMSE) of the lowflow quantiles are the smallest when the applied and population models are the same. The fame statistical properties from the nonparametric models are good within the interpolation range. Among 7 bandwidth selectors used in this study, the RRMSEs of the Park and Marron method (PM) are the smallest while those of the Shoaler and Jones method (SJ) are the largest.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2585-2587
• /
• 2003

한전에서는 전력설비의 효율적인 관리를 위하여 일찌기 배전분야에 GIS를 도입하여 신배전정보시스템(NDIS : New Distribution Information System)을 구축, 시범운영을 마치고 전국에 단계적으로 확대운영하고 있다. GIS를 업무에 활용하기 위해서는 설비도면의 입력이 선행되어야 하나 이를 수작업에 의존할 경우 많은 비용과 시간이 소요될 뿐만 아니라 입력자의 숙련정도에 따라 자료의 정확도가 달라지게 되므로, 이러한 문제점들을 근본적으로 해결하고자 설비의 위치, 심볼, 계통연결, 속성자료 등을 컴퓨터로 자동인식 입력시켜 수작업을 최소화하는 기법 및 적용연구가 필요하며, 특히 국가기본도를 Base Map으로 사용함에 따른 상대오차 보정문제도 해결되어야 한다. 본 개발은 변전소에서 전력수용가까지의 전력공급설비를 나타내는 배전설비도면에서 도면내 주요 설비인 전주와 전선을 인식하는 방법 즉, 반투명 필름에 손으로 그려진 배전설비도면의 스캐닝 영상을 인식기법을 적용하여 설비내용, 설치위치, 전선종류별 설치상태 등 지리정보시스템에서 사용될 정보를 Digital 형태의 Data로 자동생성하고 국가기본도와의 상대오차보정까지 처리하는 것을 주요내용으로 하고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.3
• /
• pp.195-205
• /
• 2020

This study addresses analysis on reactions which are induced in restraint system for airframe full-scale static structural test. This system restraints 6 degrees of freedom of a test article. It is valuable to study evaluating test error through analysis on the reactions which include all errors in a test. It is required to calculate fistly right reactions for the evaluation. This study focuses on calculation of the right reactions. The reaction is represented by sum of nominal reaction(Rn) and testing error reactions(Rce, Rerr) and is analyzed by two steps (inital vs relative reaction) in this study. It would evaluate intrinsic error at 0%DLL and error induced from applying test load, separately. Based on analysis using test data of a full-scale static test(canard type aircraft), resultant force of Rces and Rce_rs are distributed within 82.8N while resultant force of Rerr_rs shows to increase upto max. 808N as load level increment. Such well distribution of the Rce within the small range is caused from TMF values characteristics which are well distributed within -30N~40N. Additionally, it is shown through qualitative analysis on three components(X0, Y0, Z0) of the relative reaction(Rerr_r) that the reactions must be calculated with considering deformation of test article to calculate correctly reactions. This study shows also that equations characterizing deformation of components of test article are required to calculate the correct reactions, the equations must include information which will be used to calculate movement of all loading points.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.575-581
• /
• 2002

This study evaluates the variation of estimation error of area-average rainfall due to rainfall seasonality. Both the cases considering and not considering the spatial correlation are compared to derive the characteristics of estimation error. Similar cases with different accumulation time without considering the rainfall seasonality are also investigated. This study was applied to the Geum-river basin with total 28 rain gauge measurements haying more than 30 years of daily rainfall measurements. As results of the study we found that: (1) The absolute estimation error of monthly area-average rainfall show strong seasonality like the total rainfall amount. However, the relative estimation error normalized by its mean was estimated to have similar values about 5 to 8% except January and December. (2) The relative estimation error of annual area-average rainfall estimated was found to have the estimation error about 3% of its annual mean. (3) However, the relative estimation error normalized by the standard deviation remains almost the same for both monthly and annual rainfall amounts, which was estimated about 11% of its standard deviation. (4) Finally, the estimation error without considering the spatial correlation was found to become almost twice the estimation error with considering the spatial correlation.