• Water for future
• /
• v.29 no.2
• /
• pp.221-233
• /
• 1996

To investigate the hydrodynamic characteristics of a two-dimensional buoyant surface jet, the most important factors of the numerical analysis are the evaluation of the free surface and the turbulence transportation under the stratification. In present study, a numeriacal simulation model used with the semi-implicit method for pressure-linked equations (SIMPLE), the non-hydrostatic approximation and the algebraic stress model (ASM) is applied to investigate the vertical structure of internal flow hydrodynamically. The ASM enables to take account of anisotropy of turbulence, the damping effects of the density interface, and the free surface on the turbulence structure accurately. The ASM tested produces better agreement than the $\kappa-\varepsilon$ model with measurements by Nakatsuji (1984) on the flow development and turbulence structure. Applicability of the ASM to a two-dimensional buoyant surface jet is examined through comparison with experimental data.

• Journal of Welding and Joining
• /
• v.10 no.3
• /
• pp.54-62
• /
• 1992

Large steel water pipes are joined prevalently by bell and method and welded at inside and outside of lapped parts. According to the Korean Standard(KS) for fabrication of water pipes, the weldments are designed to have the length of leg which is same as or larger than the thickness of the pipe. It is recently pointed out that the standard size of weldments is too large, which results in an excessive consumption of material and labor. In this study, several cases of weldments having different sizes were investigated to reduce the length of leg to the effective size. For each case, the analysis of stresses was carried out to evaluate the safety of the welded pipes by using a package program, ANSYS, under the consideration of the loading condition of water pipes which includes the soil pressure on the pipe, the load over the road, and temperature change of the pipe. The results of this study revealed that the weldment which has the length of leg of the size over 0.7*thickness of the pipe could provide a stress level below the yield strength. Especially when the length of leg is 85% of the wall thickness, the maximum equivalent stress is only slightly higher than that of the leg of fillet of the size of 1.0*pipe thickness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.193-193
• /
• 2000

박막 내의 잔류 응력은 막의 기계적 전기적 물성을 변화시키는 등 박막에 많은 영향을 끼치는 것으로 알려져 있다. 이러한 응력은 박막의 증착 공정중 여러 가지 증착 조건에 의해서 변화하게 되는데, 특히 스퍼터링 시스템의 경우에는 증착 압력과 사용하는 가스, 인가되는 전력 등 기본적인 증착조건들에 상당한 영향을 받는다. 이러한 영향은 금속 박막의 경우 상당히 잘 알려져 있다. 또한 반도체 공정에서 금속화 과정중 금속 전극의 단락등을 막기 위해 많은 연구가 진행되어 왔다. 본 논문에서는 고주파 마그네트론 스퍼터링 시스템을 사용하여 산화 아연(ZnO)을 증착하고 여러 공정 변수들에 따른 응력의 변화를 관찰하였다. 실험에서 ZnO 타겟을 사용하였으며, 작동 가스로는 아르곤과 산소를 사용하였다. 증착한 박막들은 모두 압축 응력을 보였으며, 박막의 응력에 가장 큰 영향을 미치는 요소들은 압력, 산소와 아르곤의 비, 기판과 타겟과의 거리 등이었는데, 인가 전력에는 거의 영향을 받지 않았다. 일반적으로 스퍼터링 시스템에서의 압축응력은 atomic peening에 의해서 형성되는데, 박막을 두드리는 높은 에너지의 아르곤이나 산소의 유량과 에너지의 1/2승에 비례하는 것으로 알려져 있다. 그러나 본 시스템에서는 인가 전력을 높여도 응력이 증가하지 않았고, 타겟과의 거리를 줄이면 오히려 응력이 감소함을 보였다. 이는 박막의 응력이 peening 하는 입자의 에너지뿐만이 아니라 증착되는 물질의 증착 속도와도 밀접한 관련이 있음을 보여준다. 즉, 증착속도가 증가하면 peening하는 입자가 끼치는 응력의 효과가 반감되기 때문으로 수식을 통해 증명할 수 있었다.진탄화 처리시간을 변화시켰을 때 화합물층의 생성은 ${\gamma}$'상으로부터 시작되고 $\varepsilon$상은 즉시 ${\gamma}$'상을 소모하면서 생성되어 일정시간이 지난 후 $\varepsilon$상은 안정화되며 질소가스농도가 증가할수록 화합물 층내의 $\varepsilon$상분율은 역시 증가하였다. 한편 CH4 가스농도는 처리되는 강종에 따라 차이를 보이며 적정 CH4 가스농도를 초과시에는 $\varepsilon$상 생성은 억제되고 시멘타이트상이 생성되었다.e에서 발생된 질소 플라즈마를 구성하는 이온들의 종류와 그 구성비율을 연구하였다.여러 가지 응용으로의 가능성을 가지고 있다. 그 예로 plasma processing, plasma wave에 의한 입자 가속, 그리고 가스 레이저 활성 매질 발생 등이 있다. 특히 plasma processing의 경우 helicon plasma는 높은 밀도, 비교적 낮은 자기장, remote operation 등이 가능하다는 점에서 현재 연구가 활발히 진행되고 있다. 상업용으로도 PMT와 Lucas Signatone Corp.에 서 helicon source가 제작되었다. 또한 높은 해리율을 이용하여 저유전 물질인 SiOF의 증착에서 적용되고 있다. 이 외에도 다수의 연구결과들이 발표되었다. 잘 일치하였다.ecursor 분자들이 큰 에너지를 가지고 기판에 유입되어 치밀한 박막이 형성되었기 때문으로 사료된다.을수 있었다.보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.65-71
• /
• 2009

Hydraulic fracturing technology has been widely applied in the industry for the recovery of the natural resources such as gas, oil and geothermal heat from hot dry rock. During hydraulic fracturing stimulation, multiple cracks are created resulting in mechanical interaction between cracks. Such an interaction influences obtaining hydraulic fracturing key parameters (crack opening, length, and borehole net pressure). The boundary collocation method (BCM) has been proved to be very effective in considering mechanical interaction. However, for better confidence, it needs to be verified by comparison with analytical solutions such as stress intensity factors. In this paper, three cases, single fracture in remote uniaxial tension, single fracture in remote shear stress field and two arbitrary segments in an infinite plane loaded at infinity are considered. As a result, the BCM is proved to be valid technique to consider mechanical interaction between cracks and can be used to estimate the hydraulic fracturing parameters such as opening of the fracture, and so on.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.642-651
• /
• 1988

The present paper develops finite element procedures to calculate displacements, strains and stresses in initially stressed elastic solids subjected to static or time-dependent loading conditions. As a point of departure, we employ Hamilton's principle to obtain nonlinear equations of motion characterizing the displacement in a solid. The equations of motion reduce to linear equations of motion if incremental stresses are assumed to be infinitesimal. In the case of linear problem, finite element solutions are obtained by Newmark's direct integration method and by modal analysis. An analytic solution is referred to compare with the linear finite element solution. In the case of nonlinear problem, finite element solutions are obtained by Newton-Raphson iteration method and compared with the linear solution. Finally, the effect of the order of Gauss-Legendre numerical integration on the nonlinear finite element solution, has been investigated.

• Korean Journal of Agricultural Science
• /
• v.24 no.2
• /
• pp.194-206
• /
• 1997

This paper was performed to evaluate the properties of no-coarse lightweight concrete using perlite and expanded polystyrene bead on fine aggregate. The results were shown that w/c and unit weight was affected by absorption ratio and unit weight of using aggregate itself. The compressive strength of no-coarse lightweight concrete was showed $187kgf/cm^2$ by using natural sand, $170kgf/cm^2$ by using perlite. Tensile and bending strength were showed the same tendency of compressive strength, but when expanded polystyrene bead concrete dose not have strength nearly. The pulse velocity and static modulus of elasticity of no-coarse lightweight concrete were smaller than that of normal cement concrete. And stress-strain curves were shown that was increased with increase of stress, and when the stress-strain curve using expanded polystyrene bead was repeated at short intervals increase and decrease irregularly.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.223-232
• /
• 2003

In this study, a constitutive model called the disturbed state concept (DSC) was modified to be applied to the interface shear stress-displacement relationship between geosynthetics. The DSC model is comprised of two reference states, namely the relative intact (RI) and the fully adjusted (FA) state, and one function, namely the disturbance function. This model is a unified approach and can allow for various models as an RI state such as elastic-perfectly plastic model, hierarchical model, and so on. In addition, by using this model, the elastic and plastic displacements can be considered simultaneously. Comparisons between the measured data and predicted results through the parameters determined from four sets of large direct shear tests showed good agreements with each other, especially for the smooth geomembrane-involved interface. Although there are slight differences at peak shear strength for textured geomembrane-involved interface, this model can still be useful to predict the position of displacement at peak strength and the large displacement (or residual) shear strength.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.368-368
• /
• 2011

최근에 보고된 양질의 고효율Cu(In,Ga)Se2 (CIGS) 태양전지는 CIGS광흡수층이 강한 (220:204) 우선배향성을 갖는 것으로 알려져 있다 [1]. 이러한 CIGS우선배향성은 Se 증착압력, Na농도, 기판온도 및 Mo후면전극의 표면상태에 영향을 받는 것으로 알려져 있지만 정확한 상호관계는 아직 명확히 알려져 있지 않으며, 특히 Mo후면전극의 영향에 대해서는 체계적인 연구결과조차 극히 드문 상황이다 [2]. 본 연구에서는 CIGS 박막의 우선배향성에 대해 Mo후면전극의 미세구조가 미치는 영향 및 이에 따른 cell특성의 변화에 대해서 연구하였다. Mo후면전극의 미세구조는 2 mTorr~16 mTorr까지 증착압력을 변화시켜 제어되었고, CIGS광흡수층은 이렇게 준비된 Mo후면전극상에 3단계 동시증밥법(3-stage process)을 사용하여 형성하였다. XRD를 통한 박막의 우선배향성 평가에서, Mo 증착압력에 대한 IGS I(300)/I(006) 및 CIGS I(220:204)/I(112)의 거동은 Mo 미세구조와 밀접한 관련이 있는 잔류응력(residual stress)의 변화 거동과 상당히 일치함을 보였다. 이에 반해, 높은 압력의 Mo위에 형성된 강한 (220:204) 우선배향성의 CIGS와 bare-glass위에서 형성된 강한 (112) 우선배향성의 CIGS내 Na농도는 서로 유사하였다. 상기의 결과는 Mo미세구조 그 자체가 CIGS 박막 우선배향성의 원인이 됨을 나타낸다. Selenized Mo시편의 XRD분석 및 IGS/Mo 시편의 TEM분석결과을 통해 MoSe2의 반응성이 잔류응력과 비례하는 Mo in-gain 밀도에 의존하는 함을 알 수 있었고, 이러한 MoSe2반응성(reactivity)과 IGS우선배향성 사이에 상당히 밀접한 관련이 있으며 이에 CIGS의 우선배향성이 결정됨을 확인하였다. 마지막으로, Mo변수에 의해 제작된 cell의 특성분석으로부터 cell의 효율이 주로 VOC의 증가에 기인하여 CIGS (220:204) 우선배향성의 정도에 비례하였다.

• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2001

Recently, prestressed concrete(PSC) bridge structures with many repetitive spans have been widely constructed using the segmental construction method in many countries. In these segmentally constructed PSC bridges, there exist many construction joints which is required coupling of tendons or overlapping of tendons to introduce continuous prestress through several spans of bridges. The purpose of this paper is to investigate in detail the complicated stress distributions around the tendon coupled joints in prestressed concrete girders. To this end, a comprehensive experimental program has been set up and a series of specimens have been tested to identify the effects of tendon coupling. The present study indicates that the longitudinal and transverse stress distributions of PSC girders with tendon couplers are quite different from those of PSC girders without tendon couplers. It is seen that the longitudinal compressive stresses introduced by prestressing are greatly reduced around coupled joints according to tendon coupling ratios. The large reduction of compressive stresses around the coupled joints may cause deleterious cracking problems in PSC girder bridges due to tensile stresses arising from live loads, shrinkage and temperature effects. The analysis results by finite element method correlate very well with test results observed complex strain distributions of tendon coupled members. It is expected that the results of this paper will provide a good basis for realistic design guideline around tendon coupled joints in PSC girder bridges.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.198-202
• /
• 2010

In and around the Korean Peninsula, 18 intraplate earthquake focal mechanisms since 1936 were analyzed to understand the characteristic of focal mechanism and regional stress orientation and tectonics. These earthquakes are largest ones from the last century and may represent the characteristics of earthquake in this region. Focal mechanism of these earthquakes show predominant strike-slip faulting with small amount of thrust components. The average P-axis is almost horizontal ENE-WSW direction. This mechanism pattern and the direction of maximum stress axis is very similar with northeastern part of China and southwestern part of Japan. However they are quite different with the eastern part of East Sea. This indicate that not only the subducting Pacific Plate from east but also the indenting Indian Plate controls focal mechanism in the far east of the Eurasian Plate.