• Proceedings of the Korean Vacuum Society Conference
• /
• 1992.07a
• /
• pp.29-30
• /
• 1992

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.197-201
• /
• 2015

Experimental and numerical analysis has been carried out in this paper to understand correlation between volume and yield of cellular bulkhead. It was firstly confirmed from these results that the conditions and parameters considered in the finite element analysis were reasonable and realistic due to the fact that the yield loads determined by the two different methods were equivalent in actual. Based on this results, a series of intensive numerical analysis has been further performed and revealed that the yield load varied in direct proportion to the change in the volume of the cellular bulkhead.

• Tunnel and Underground Space
• /
• v.12 no.4
• /
• pp.304-311
• /
• 2002

This study reports the influence of vocid geometry on fracture closure and permeability from numerical experiments. As the aperture distributions of rock fractures are characterized by statistical methods, synthetic fractures have successfully been simulated in this way. Based on the generated fracture models, models for fracture closure and flow calculation have been developed. A fracture closure model has been developed by considering the asperity compression and half-space deformation, and flow calculations have been performed using a finite difference method adopting a local cubic law. The results of numerical experiments have shown that the increase in the aperture spatial correlation leads the fracture closure and the decrease in fracture permeability to increase. Also, it has been indicated that there is an implicit relation between fracture normal stiffness and permeability. The importance of this study is to enhance the understanding the hydro-mechanical behavior of fractured rock massed due to engineering projects.

• Journal of the Korean Institute of Gas
• /
• v.15 no.1
• /
• pp.54-59
• /
• 2011

Generally, the flow hunting is observed in almost all of the orifice meters but the intensity of the flow hunting is different at each metering system. In order to investigate the relations between pipe diameter and the flow instability or the flow hunting in a real metering system, a one-dimensional pipeline network model was built and analyzed for the examination of flow characteristics and relations to the flow hunting, changing diameters of the meter and the pipes before and after the meter. Finally, the effects of pressuredifference variation and flow hunting following to the variations of the diameters of the meter and the pipes before and after the meter were investigated and the relations were examined as well.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.227-234
• /
• 2009

In this study, cross correlations among sample data at each site are calculated to obtain the asymptotic cross correlations among probability weighted moments at each site using Monte Carlo simulation. As a result, the relations between the asymptotic cross correlations among probability weighted moments and the inter-site dependence among sample data at each site are nearly a linear relation with slope 1. The smaller ratio of concurrent data size to entire sample size is, the weaker the relationship grows. Simple power function which the correction term in power function accounts for the differences of the sample size between two sites was fitted to each case to estimate the parameter. It is noted that this result can be used in the various researches which include the estimation of the variance of quantile considering cross correlations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.19-19
• /
• 2015

최근 기후변화로 인해 집중호우 및 게릴라성 폭우의 발생빈도가 증가하고 있다. 또한, 도시화 및 산업화로 인해 불투수지역이 증가하여 첨두강우의 도달시간은 짧아지고, 강우강도는 증가하는 현상을 보이고 있다. 이로 인해 도시유역에서는 우수관의 통수능 부족으로 인한 홍수가 빈번히 발생하고 있다. 본 연구에서는 EPA-SWMM User's manual에서 제공하는 예제 관망도를 이용하여 SWMM 모형 매개변수들 간의 상관관계 분석을 수행하였다. 사전 조사 및 분석을 통해 유역폭, 관조도계수, 불투수유역 조도계수, 투수유역 조도계수, 불투수면적 비율 등 총 5개의 매개변수를 분석 대상으로 선정하였다. 매개변수들 간의 상관관계를 분석한 결과 유역폭-관조도계수, 유역폭불투수유역조도계수, 불투수면저 비율-투수유역 조도계수가 양의 기울기를 가지는 1차 선형함수 형태를 보였다. 즉, 예로 유역폭이 증가하면 관조도계수 또한 증가하는 경향을 보였다. 반대로 유역폭-불투수면적비율, 불투수유역 조도계수-관조도계수의 경우 음의 기울기를 가지는 상관관계를 보였으며 특히, 유역폭-불투수면적비율의 경우 2차 회귀곡선을 가지는 감소경향을 보였다. 본 연구의 결과를 활용하여 향후 우수관 설계를 수행한다면 내수침수 저감에 실무적인 도움을 줄 수 있을 것으로 판단된다.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.14-22
• /
• 1999

본 연구는 일반적으로 소·중용량의 냉동·공조기에 많이 사용되고 있는 플레이트 핀 코일형 공냉응축기를 대상으로 수치해석에 의해 응축기의 특성을 파악하였다. 해석에서는 응축기를 과열증기영역, 2상영역 및 과냉각액영역으로 구분하여 공냉 응축기의 성능에 큰 영향을 미치고 있는 공기온도, 공기측열전달률, 입구 냉매온도, 응축온도 및 질량유량 등을 파라메터로하여 이들의 상호관계와 이들이 응축완료점까지의 거리 및 방열량 등에 미치는 영향을 파악하였다. 해석결과로는 해석모델로부터 각 영역의 냉매 상태량, 온도분포 및 열전달률을 구할 수 있었고, 일반적으로 응축기의 성능에 많은 영향을 미치는 각종 파라메터들을 중심으로 광범위한 동작조건에서 이들의 상관관계 및 특성을 파악하므로서 응축기 설계를 위한 기초 자료 및 설치장소나 주위환경 등에 따라 서로간에 다양한 영향을 미치는 실제장치의 동적특성 해석을 위한 자료를 얻을 수 있었다.

• Journal of Forest and Environmental Science
• /
• v.20 no.1
• /
• pp.58-68
• /
• 2004

In this study, the stand structure of the Korean White Pine stand is analysed by the changing growth situation and the growth model for DBH, Height, and Volume per ha, which is estimated with the data collected for Korean White Pine stand in the Research Forests of Kangwon National University. The results were summarized as follows The estimated equations were (1) Y=20.687Ln(X)-50.431 for DBH, (2) Y=12.951Ln(X)-31.225 for Height, (3) Y=171.06Ln(X)-462.16 for Volume per ha. The mean volumes per ha according to the age classes using the estimated equations were $27.45m^3$ $91.05m^3$, $147.71m^3$, $190.03m^3$, $223.84m^3$, $252.01m^3$ and $276.15m^3$ for the age class II, III, IV, V, VI, VII and VIII, respectively. And also, the relationship between mean annual increment(MAI) and periodic average increment(PAI) was analysed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2603-2609
• /
• 2014

Reliability analysis of mechanical systems requires statistical modeling of input random variables such as distribution function types and statistical parameters that affect the performance of the mechanical systems. Some random variables are correlated, but considered as independent variables or wrong assumptions on input random variables have been used. In this paper, joint distributions were modeled using copulas and Bayesian method from limited number of data. To verify the proposed method, statistical simulation tests were carried out for various number of samples and correlation coefficients. As a result, the Bayesian method selected the most probable copula types among candidate copulas even though the candidate copula shapes are similar for low correlations or the number of data is limited. The most probable copulas also yielded similar reliabilities with the true reliability obtained from a true copula, so that it can be concluded that the Bayesian method provides accurate statistical modeling for the reliability analysis.

• Journal of the korean Society of Automotive Engineers
• /
• v.17 no.5
• /
• pp.36-44
• /
• 1995

뇌손상에 대한 원인설명으로써 소위 central theory를 들수 있다. 이 방법은 머리의 질량 중심에서 측정된 가속도를 이용한 HIC(Head Injury Criterion)의 값을 계산하여 이를 안전기준의 척도로 삼는 방법으로 이와 같은 해석에 따라 각 자동차 회사에서는 안전기구를 설계 제작하고 있다. 그러나 실제 임상적으로 HIC의 상관관계는 뚜렷하지 못하다. 이런 문제점을 해결할 수 있는 하나의 대안으로써 유한요소모델을 이용한 해석방법을 들 수가 있다. 이 글에서는 뇌의 간략한 해부학적인 해설과 아울러 뇌의 3차원 유한 요소 모델을 이용한 해석방법을 소개하고자 한다.