• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.205-215
• /
• 2011

In this study, we analyzed physical properties of granites and their correlation with rock mass classification methods. The granite samples were obtained from field survey, in-situ borehole tests and laboratory tests for a design phase of various roads, railways and other civil engineering works in Korea. Among the measured physical properties, the results of unit weight, compressive strength, tensile strength, seismic velocity, cohesion, friction angle, elastic modulus and deformation modulus were introduced. We also correlated these properties with the compressive strength. The results of different rock classification method of RQD, RMR, and Q-system against the granites in Korea were compared with each other, and the correlation equations were proposed in a more simplified form. We also derived RMR values using the compressive strength as well as the RQD values of in-situ drilled cores, and estimated the deformation modulus of in-situ rock mass in terms of the RMR values.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.85-98
• /
• 2017

In general, under the repetitive dynamic load generated by rail cars running on the track, subgrade soil experiences changes of stress conditions such as deviatoric stress (${\sigma}_d$) and bulk stress (${\theta}$). Due to the repetitive change of deviatoric stress (${\sigma}_d$) with number of loadings, the resilient modulus ($M_R$) can be obtained by using the measured resilient strain (${\varepsilon}_r$) after a sufficient number of loadings. At present, no plausible and unified test method has been proposed to obtain the resilient modulus of railway track subgrade soil. In this study, a possible test method for obtaining the resilient modulus ($M_R$) of railway track subgrade soil is proposed; this test, by utilizing repetitive triaxial compression testing, can consider all the important parameters, such as the confining stress, deviatoric stress, and number of loadings. By adapting and using the proposed test method to obtain $M_R$, $M_R$ values for compacted track subgrade soil can be successfully determined using soil obtained in three field sites of railway track construction with changing water content range from OMC. In addition, shear modulus (G) ~ shear strain (${\gamma}$) relation data were also obtained using a mid-size RC test. A correlation analysis was performed using the obtained G and $M_R$ values while considering the strain levels and modes of strain direction.

• Optical Science and Technology
• /
• v.8 no.4
• /
• pp.5-10
• /
• 2004

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.381-381
• /
• 2015

표면영상유속계측법(Surface Image Velocimeter; SIV)은 영상분석기법의 일종으로 하천 표면의 유동을 영상저장장치로 기록하고 연속되는 이미지상의 입자이동을 계산하여 유속을 산정하는 방법이다. 그러나 표면영상유속계를 활용한 유속분석과정에서 현장 상황에 따라 많은 오차 요인들이 있을 수 있기 때문에 계산한 유속 산정 결과를 그대로 사용하면 정확도가 낮아질 수 있다. 특히 야간 영상과 같은 영상의 화질이 떨어지는 경우에는 유속 산정 결과를 필터링해서 사용해야 한다. 이는 순간 유속장을 분석하는 과정에서 획득된 이미지에 따라 분석된 유속벡터가 평균 유속보다 과다하게 크거나 상관계수 값이 너무 작은 경우가 포함되기 때문이다. 이 연구에서는 제주도 외도천 외도정수장에서 2013년 5월 27일 집중호우에 의한 유출 발생 주 야간 유출영상자료를 획득하여 표면영상유속계(SIV)와 ADCP를 활용하여 유량을 분석하고, 동시에 고정식 전자파 표면유속계인 Kalesto 관측 유량과 비교 분석하였다. 비교과정에서 제주도는 댐방류량과 같은 유량의 참값이 없으므로 각각 관측기기의 상대적인 비교를 하여 경향성을 분석하였다. 분석결과 주간유출영상은 상관계수가 0.6~0.7범위에 해당하는 유속이 전체 59개의 유속벡터 중 6.8%로 나타났으며, 0.7~0.8범위가 13.6%, 0.8~0.9범위가 18.6%, 0.9~1.0범위가 61.0%의 퍼센트를 나타났다. 야간유출영상을 주간유출영상과 비교해보면 0.6~0.7범위에 해당하는 상관계수가 6.8% 높게 분석되었으며, 반대로 0.9~1.0범위에 해당하는 상관계수는 17% 낮게 분석되었다. 이와 같은 결과는 야간유출영상이 주간유출영상에 비해 영상의 질이 떨어짐을 나타내며 표면영상유속계를 적용하여 유량을 산정하는 과정에서 획득되는 영상에 따라 상관계수에 대한 합리적인 필터링 과정이 필요하다.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.641-648
• /
• 1997

Mutual information is useful for analyzing nonlinear dependence in time series in much the same way as correlation is used to characterize linear dependence. We use multivariate kernel density estimators for the estimation of mutual information at different time lags for single and multiple time series. This approach is tested on a variety of hydrologic data sets, and suggested an appropriate delay time $ au$ at which the mutual information is almost zerothen multi-dimensional phase portraits could be constructed from measurements of a single scalar time series.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.115-124
• /
• 2007

A series of α, β-unsaturated ketones are synthesized by Crossed - Aldol condensation reaction, from ecofriendly 6-methoxy-2-naphthyl ketones and substituted benzaldehydes under solvent free conditions using silica-sulfuric acid as a catalytic reagent. The yields of ketones are more than 90% and the catalyst was reusable for further run. There is no appreciable decrease in the yield of product and the activity of catalyst. These chalcones were characterized by their physical constants and spectral data (IR, 1H-, 13C-NMR and Mass). These spectral data are subjected to correlate various Hammett substituent constants with single and multiparameter correlation equations. From the results of statistical analysis the influence of electronic effects of substituents on the spectral data of the ketones were explained.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.252-255
• /
• 2000

This study was conducted to investigate the application of ATP bioluminescence to measure the degree of microbial contamination from raw meat, meat processing and milk processing lines. Samples collected from slaughter house, meat and milk processing plants were tested for estimation of bacterial number by using ATP bioluminescence and conventional method. The former result was transffered to R-mATP value(log RLU/ml), and the latter transffered to CFU(log/ml). Correlation coefficient(r) between aerobic counts(CFU, log/ml) and R-mATP(log RLU/ml) value was 0.93(n=408). R-mATP of aerobic counts from beef, pork, chicken was 0.93(n=220), and that was 0.93(n=187) between meat processing and dairy processing plants. In addition, Correlation coefficient(r) between aerobic counts and R-mATP was 0.87(n=252) under 1$\times$10${^5}$/ml of bacterial count and 0.74(n=152) over 10${^5}$ respectively.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.969-979
• /
• 2018

This paper presents reflection symmetry of polarimetric SAR over the Amazon rainforest in terms of correlation coefficients between the pairs of HH- and HV-pol and VV- and VH-pol data by ALOS PALSAR. The reflection symmetry is defined as a non-zero correlation between HH- and HV-pol and VV- and VH-pol over natural distributed targets, and is a fundamental assumption for cross-talk calibration coefficient computation and for three-component decomposition for polarimetric SAR data. The Amazon rainforest is especially one of the common global reference sites for the reflection symmetry. The correlation coefficients for the pairs of reflection symmetry obtained in this study range from 0.018 to 0.097. The results imply that there exists a non-negligible dependency between co-pol and cross-pol in the distributed natural targets, and consequently the non-zero correlation must be considered as a potential contribution to errors of spaceborne SAR polarimetry to some extent.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1301-1313
• /
• 2009

Efficiency and sensitivity of BLS adjustment method have been studied and the method is known to provide more accurate estimate of total by using properly adjusted weights of samples. However, BLS methods provide different efficiencies according to the magnitudes of correlation coefficients and the sizes of samples in strata. In this paper we study the efficiency of the BLS adjustment according to the sample sizes and correlations in strata. For this study, 2007 monthly labor survey data is used.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.34-34
• /
• 1987

Friction welding has emerged as a reliable process for high-production commercial application with significant economic and technical advantages. But nondestructive test in friction weld was not clearly developed. Therefore the experimental verification is necessary in order to understand the characteristics of the pulse echo effects according to various change in welding conditions. This paper presents a new attempt to detect the bond strength of friction welds by ultrasonic. Instead of looking for a flaw or cracks at the interface, the new approach evaluates the coefficient by reflection which provides a single quantitative indicator involving the acoustic energy reflected at the interface. The objective of this study is to find the relationship between the reflection coefficients and the weld strength. Results of the bar-to-bar friction welding of aluminum to copper and stainless steel and such relationship investigation are presented and interpreted.