• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2512-2520
• /
• 2013

In this paper, the T-SRR (Triple Split Ring Resonator) using MNG (mu-Negative) meta-material adapted in a low-loss bandpass filter with 3-stages is suggested. The size of the T-SRR in the proposed bandpass filter with low dielectric constant PCB can be easily controlled. And the ${\lambda}/4$ transmission line theory is applied. The proposed T-SRR and filter have the center frequency of 10 GHz with QL value of 184 for military-satellite communication system in I band. The experimental results of the filter show that the insertion and return losses are 1.44 dB and 17.3 dB with bandwidth of 10 %, respectively. The proposed filter will be redesigned by IPD material etc. should be placed here. These instructions give you guidelines for preparing papers for JICCE.

• The Journal of Engineering Geology
• /
• v.23 no.1
• /
• pp.29-36
• /
• 2013

The application of appropriate rehabilitation methods can improve the efficiency of clogged wells and extend their life. In this paper, we study the feasibility of well cleaning using high-voltage pulsed discharge, in which electrical energy is used to produce impulsive pressure in water, in contrast to conventional methods that employ chemical or pneumatic energy sources. This technique utilizes the compressive shock wave generated by the expansive force of hot, dense plasma that is produced during a pulsed discharge in the gap between electrodes immersed in water. Compared with conventional techniques, this method is simple, and easy to handle and control. Using a capacitive pulsed power system with an electrical energy of 200 J, an impulsive pressure of 10.7 MPa is achieved at the position 6 cm away from the discharge gap. The amplitude of the impulsive pressure was easily controlled by adjusting the charging voltage of the capacitor and was almost linearly proportional to peak discharge current. The technique achieved good results in cleaning feasibility tests with mock-up specimens similar to clogged well screens.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1201-1206
• /
• 2013

Defects that occur during the manufacturing process or operation of a wind turbine blade have a great influence on its life and safety. Typically, defects such as delamination, pore, wrinkle and matrix crack are found in a blade. In this study, the detectability of the pores, a type of defect that frequently occur during manufacturing, was examined from the full field strain distribution determined with the image correlation technique. Pore defects were artificially introduced in four-ply laminated GFRP composites with $0^{\circ}/{\pm}45^{\circ}$ fiber direction. The artificial pores were introduced in consideration of their size and location. Three different-sized pores with diameter of 1, 2 and 3 mm were located on the top and bottom surface and embedded. By applying static loads of 0-200 MPa, the strain distributions over the specimen with the pore defects were determined using image correlation technique. It was found the pores with diameter exceeding 2 mm can be detected in diameter.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.970-977
• /
• 1999

Effect of Mo interlayer on the relaxation of residual stress in AlN/Cu pint bonded by active-metal brazing method was investigated. The stress analyses by finite-element-method, the measurement of pint strength and the observation of fracture surface were carried out and their results were compared with each other. From the results of stress analysis it is confirmed that a Mo interlayer led to a shift of maximum stress concentration site from AlN/insert-metal interface$\rightarro$ insert-metal/Mo$\rightarro$Mo interlayer. Additionally, with increase of the Mo interlayer thickness the stress concentration with tensile component was separately built both at the interface of Cu/Mo and AlN/Mo. whereby the residual stress in the free surface of AlN close to the bonded interface was drastically reduced. The AlN/Mo/Cu pints with Mo interlayer thickness of above 400$\mu\textrm{m}$ showed the strengths higher than 200 MPa. upto max. 275 MPa, while the AlN/Cu pint only max. 52 MPa.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.734-738
• /
• 2005

A gene coding for xylanase from alkali-tolerant Bacillus alcalophilus AX2000 was cloned into Escherichia coli $DH5\alpha$ using pUC19. Among 2,000 transformants, one transformant showed clear zone on the detection agar plate containing oat-spells xylan. Its recombinant plasmid, named pXTY99, was found to carry 7.0 kb insert DNA fragment. When the nucleotide sequence of the cloned xylanase gene (xynT) was determined, xynT gene was found to consist of 1,020 base-pair open reading frame coding for a poly-peptide of 340 amino acids with a deduced molecular weight of 40 kDa. The coding sequence was preceded by a putative ribosome binding site, and the transcription initiation signals. The deduced amino acid sequence of xylanase is similar to those of the xylanases from Bacillus sp. Nl37 and B. stearothermophilus 21 with $61\%$ and $59\%$ identical residues, respectively.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.1
• /
• pp.39-45
• /
• 2000

Two maize transposable elements, immobilized Ac (iAc) and Ds, have been introduced into the genome of a diploid potato clone (Solanum tuberosum Group Phureja clone 1.22). The iAc is a modified Ac that is supposed to be unable to transpose but is expected to trans-activate the transposition of a Ds that is unable to transpose by itself. When the leaf and stem explants of in vitro shoots of the clone 1.22 were inoculated with Agrobacterium tumefaciens strains harboring binary vectors containing the iAc and the Ds, calli were formed from the explants on media containing 50 mg/L of kanamycin, and shoots were regenerated from the calli. The regenerated shoots formed roots when cultured on media containing 100 mg/L of kanamycin, whereas untransformed shoots did not form roots on the same media. The PCR amplification of the DNA's from the transgenic plants confirmed that the iAc and the Ds elements were introduced into the potato genome of 1.22.

• Journal of Chest Surgery
• /
• v.38 no.7 s.252
• /
• pp.468-475
• /
• 2005

Transmyocardial revascularization (TMR) in end stage ischemic heart disease results in variable clinical responses. We investigated the acute effect of early reperfusion and the angiogenesis after formation of the transmyocardial channel in a transplanted rat heart model with acute myocardial infarction. Material and Method: In the 30 transplanted hearts we induced acute myocardial infarction by ligating the proximal left coronary artery and inserted a porous 22G intravenous cannula into the left ventricle. After ten minutes of reperfusion, we removed the cannula. At every stage, we recorded the heart rate, QRS size, and left coronary arterial blood flow using the electrocardiogram and Doppler. One week later the rats were sacrificed and evaluated for the patency of intramyocardial channels and the angiogenesis. Result: The heart rates after ligation and after cannula insertion were $239.1\pm61.7,\;235.8\pm58.0bpm$ respectively, and they were statistically significantly slower than that of before ligation, $277.6\pm40.3bpm\;(p=0.017,\;p=0.007\;respectively)$. QRS sizes before ligation, after ligation, and after cannula insertion were $3.6\pm3.3mm,\;2.8\pm3.3 mm,\;and\;2.4\pm2.2mm,$respectively, and there was no significant difference in the three groups. Doppler findings after ligation showed that average peak and mean values of coronary perfusion were significantly decreased from $2.11\pm0.17kHz,\;1.25\pm0.22kHz\;to\;0.83\pm0.15kHz,\;0.38\pm0.11kHz$(p<0.05 respectively). After insertion of the porous cannula, the average peak and mean values of coronary perfusion were $0.61\pm0.05kHz\;and\;0.33\pm0.05 kHz$ respectively, but there was no statistically significant change compared to values after ligation. In all cases except one, pathologic findings showed no patent channels in the acute stage, however, one case showed the angiogenesis. Conclusion: We confirmed that TMR in a rat heart transplant model did not show blood flow through the channel in the acute stage. However, reperfusion effect in some cases had a potential for angiogenesis.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2000.12a
• /
• pp.29-34
• /
• 2000

산업 발달에 따라 날로 많은 식품들이 새롭게 개발되어지고 있다. 또한 이와 병행해서 식품으로 인한 알레르기 발생 빈도도 날로 증가하고 있으며 그 증상 또한 점차 심화되고 있는 것이 세계적인 추세이다. 우리나라도 예외는 아니어서 일반 알레르기 환자뿐 아니라 식품으로 인한 알레르기 환자들이 점차 증가됨이 보고되어지고 있다. 농산물 시장의 수입개방이후 우리나라에는 많은 해외 농산물이 수입되어지고 있으며 그 중 작년 한해의 경우 총 수입 농산물의 10%를 넘는 유전자 재조합 농산물이 우리나라에 수입되어진 것으로 통계 보고되어졌다. 이러한 관점에서 알레르기 환자의 증가와 새로운 식품 (특히 유전자 재조합 식품)의 증가에는 서로 관련성이 있을 것으로 추측되어지고 있어 (새로운) 식품에 대한 알레르기성의 예측과 관리가 필요한 실정이다. 이에 몇몇 발표된 유전자 재조합 식품에 관련된 알레르기성 검사 논문들과 실험실에서 이루어진 연구 결과들을 중심으로 유전자 재조합 식품의 알레르기 위험성에 대해 알아보고자 한다. 일반적으로 식품의 단백질이 알레르겐(allergen)으로 작용하기 위해서는 먼저 소화효소에 의해 분해되어지고 장에서 흡수되어져서 immunopotent cell에 의해 process 되어 immune system에 present 되어져야 한다. 따라서 단백질로 인한 알레르기 반응은 그 단백질의 자연적 형태 뿐만이 아니라 소화 효소에 분해된 단편들의 구조 또는 다른 알레르겐 단백질과의 유사 구조로 인한 교차 반응에 의해 발생함을 기억해야 한다. 식품 단백질 중 어떤 단백질이 알레르겐으로 작용하는가에 대한 특이성 조사에 많은 관심이 집중되어지고 있지만 아직까지는 대략 다섯 개 정도의 일반적인 특성으로서 요약되어질 수 있다. 그러나 이러한 대략의 특성에 적용되지 않는 식품 알레르겐도 많음을 잊어서는 안 될 것이다. 알레르겐으로 작용하는 식품 단백질의 일반적 특성 1. 좋은 수용성 2. 식품내에 많은 부분을 차지하는 주 단백질이 주 알레르겐으로 작용 3. 단백질내에 하나 이상의 IgE-binding site 존재 4. 위장액에 대한 저항성 5. 10～70 kDa 크기 유전자 재조합 기술이란 말 그대로 유전자를 인위적으로 새롭게 조합하는 기술로 이전의 기술로는 불가능했던 유전적 변형을 농작물과 동물에 가능하게 했으며 이로 인해 유전적으로 변형된 식용 동식물의 개발이 가능하게 되었다. 새로운 유전인자를 개체에 삽입함으로 새로운 단백질이 발현 될수 있고 그로 인해 1) 해충과 질병에 대한 저항성 증가, 2) 화학 제초제에 대한 새로운 저항성 부여, 3) 식품의 저장성 향상, 4) 식품의 영향적 보충/향상 등의 이점을 얻을 수 있다 (표 1). 세계적으로 유전자 재조합 된 새로운 농산물의 재배는 날로 증가추세에 있으며 그 중에서 가장 많은 부분을 차지하는 농산물로 soybean을 들 수 있으며 (표 2) soybean을 중심으로 그 알레르기성의 변화가 연구 조사된 몇 가지 예를 살펴보고자 한다. (표 3)에 요약된 soybean중 첫 번째 경우는 재초제에 대한 저항성을 높여주기 위해 Agrobacterium에 존재하는 EPSPS라는 단백질을 콩에서 발현하도록 찬 유전자 재조합 된 콩의 경우이다. 이 콩의 경우에는 첫째. 이전된 새로운 단백질 EPSPS가 다른 여러 식물에 이미 존재하고 있는 단백질로서 우리가 이미 이러한 식품을 섭취할 때 이 단백질도 같이 섭취해오고 있었다는 점, 둘째. 이 단백질이 소화액 분해 실험에서 짧은 시간내에 분해가 되었다는 점, 셋째. 재조합 된 콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었다는 점등의 결과를 기준으로 알레르기에 대한 개별 검사 없이 안전한 콩으로 결론짓고 있다. 영양성을 높이기 위해 Brazil nut에서 methionine 함량이 풍부한 2s albumine을 콩에서 발현하도록 한 두 번째 유전자 재조합 콩의 경우 이전된 단백질 때문에 Brazil nut에 알레르기 반응을 일으키는 알레르기 환자들을 조사한 결과 역시 재조합 된 콩에도 알레르기 반응을 일으켰다는 보고이다. Brazil nut에서 콩으로 이전된 단백질이 Brazil nut에서의 알레르기성을 그대로 유지한 점을 볼 때 새로운 단백질이 어디에서 유래하는가가 중요함을 잘 보여준 연구이다 세 번째 콩의 경우 역시 영양성을 높여주기 위해 corn에서 10 kDa과 HSZ 단백질을 콩에서 발현하도록 유전자 재조합했는데 이 콩의 경우는 알레르기 환자들이 유전자 재조합 된 콩과 자연 콩에 반응의 차이를 나타내지 않았다는 결과 보고이다. 위의 세 실험 결과들을 종합해 볼 때 무엇보다도 새롭게 발현된 단백질이 원래 어떤 성질을 갖고 있으며 어디에서 유래했는지가 알레르기성 조사에 중요한 역할을 한다 할 수 있겠다. 또한 유전자 재조합된 식품들은 알레르기 환자들을 위해 표기되어져야 할 것인데 이를 위한 알레르기성 검사 실험은 공공단체를 통해 이루어져야 할 것이며 환자들마다 알레르겐으로 작용하는 단백질의 인식부위(epitope)가 다를 수 있기 때문에 적어도 10명 이상의 알레르기 환자들이 조사되어져서 검사가 이루어져야 할 것이다. 환자들의 혈청을 통한 in vitro 실험에서는 ELISA, RAST, immunoblotting과 같은 검사 방법들이 적용될 수 있고, 그 결과가 음성인 경우에 그 다음 단계로 in vivo 실험에서는 직접 환자의 피부반응검사 (skin prick test)나 DBPCFC (double-blind placebo-controlled food challenge) 검사 방법을 통해 확인되어져서 이 모든 경우가 음성인 경우와 하나라도 양성인 경우를 구별하여 식품에 표기함으로 알레르기 환자들의 유전자 재조합 식품에 대한 안전성이 보장되어져야 할 것이다.

• Journal of Life Science
• /
• v.12 no.2
• /
• pp.188-199
• /
• 2002

A gene coding for xylanase from thermo-tolerant Bacillus pumilus TX703 was cloned into Escherichia coli DH5 $\alpha$ using pUC19. Among 7,400 transformants, four transformants showed clear zones on the detection agar plates containing oat-spells xylan. One of them which showed highest xylanase activity was selected and its recombinant plasmid, named pXES106, was found to carry 2.24 kb insert DNA fragment. When the nucleotide sequence of the cloned xylanase gene (xynK) was determined, xynK gene was found to consist of 1,227 base-pair open reading frame coding for a polypeptide of 409 amino acids with a deduced molecular weight of 48 kDa. The coding sequence was preceded by a putative ribosome binding site, the transcription initiation signals, and cia-acting catabolite responsive element. The deduced amino acids sequence of xylanase is similar to those of the xylanases from Hordeum vulgare (barley) and Clostridium thermocellum, with 39 and 31% identical residues, respectively. The amino acids sequence of this xylanase was quite different from those of the xylanases from other Bacillus species.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.4
• /
• pp.56-77
• /
• 2010

The tortoise pedestal for the memorial monument of Choe Jin-rip(an army officer in the mid-Joseon Period) in Ijo-ri, Naenam-myeon, Gyeongju is known to have been made in 1740. As such, it was originally understood to be a Joseon imitation of a tortoise pedestal made in the Unified Silla Period. The style of the Ijori Tortoise Pedestal differs from other tortoise pedestals dating back to the same period, and bears no resemblance to the Unified Silla pedestals of which it is a copy. Mullu ilgi, a record of the production of the pedestal, explains that the monument was made before the pedestal. Traces show that the two sides of the bottom of the monument were cut off so that it would fit into the smaller space made on the pedestal. It is scarcely conceivable that they made the pedestal and the platform without considering the bottom size of the monument. The record only states that the monument was made at a temple site named Baegundae, without explaining the details of the production process. This leaves some doubt as to whether its production was undertaken systematically. The cloud patterns engraved on this pedestal look similar to the temporal seriation found on the Tortoise Pedestal of the Royal Tomb of King Muyeol and the Seoangni Tortoise Pedestal of Gyeongju. The lotus pattern decorating the square pedestal on the back of the tortoise is one of a number of patterns that were widely used on roof-tiles in the 8th century, the heyday of the Unified Silla Kingdom. The Ijori Tortoise Pedestal, which represents a tortoise moving forward, displays a liveliness the like of which is rarely found in its cousins remaining in Gyeongju. The layout of the patterns in a queue on the tortoise-shell looks much better schematized than those made at an earlier date. It also looks like a more developed form, with the use of space taken into account. Such factors as the style of the patterns, the incongruity between the monument and its pedestal, and what is stated in the historical record indicate that the Ijori Tortoise Pedestal of Gyeongju was made in the mid-8th century(i.e. during the Unified Silla Period), rather than in the Joseon Period(i.e. the 18th century), as an imitation of earlier ones, including changes in the style unique to the Silla Period.