• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.721-727
• /
• 2001

In this paper, we propose a two-dimensional interleaving structure of holographic digital data storage. In this storage, many of the digital binary data are recorded, retrieved and processed in a two-dimensional data image (1000$\times$1000 bits). Therefore, burst errors in this digital device also have two-dimensional characteristics and it is required to use effective two-dimensional interleaving to overcome them. Bits of every code word should be distributed in an equilateral triangular lattice structure when they are scattered considering the random shape and occurrence of burst errors. We deal with factors and algorithm to construct this interleaving structure of equilateral triangular lattice.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.130-137
• /
• 2013

The more accurate numerical analysis is needed, The more important to arrange nodes and elements properly on the structures wanted to be analyzed. In this study, automatic mesh generation method is developed for triangular mesh modeling in wind tower and substructure formed in circular sections especially, which have structural and economical benefits in shallow water area. It can consider variety conditions by inputting the detail data such as height and types. Also, this study includes the comparison and verification with the mesh generation by Delaunay triangular technique on 3 dimensional space and the examples of mesh generation for proposed tower and substructure. The result of this study will be widely applied to analyze the existing and proposed models for wind turbines.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.109-117
• /
• 2002

An off-surface flow visualization experiments have been performed to investigate the flow field over a delta wing with the leading edge extension(LEX). The model is a flat wing with $65^{\circ}$ sweepback angle. The free stream velocity is 6.2 m/s, which corresponds to Reynolds number of $4.4\times10^5$ based on the wing root chord. The angle of attack and sideslip angle range from $16^{\circ}\sim28^{\circ}$ and $0^{\circ}\sim-15^{\circ}$, respectively. The visualization technique of using the micro water-droplet and the laser beam sheet enabled to observe the vortical flow structures, which can not be obtained by 5-hole probe measurements. With sideslip angle, the interaction and breakdown of the LEX and wing vortices was promoted in the windward side, whereas, it was suppressed in the leeward side.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.277-284
• /
• 2020

The remaining range between missile and target can be used to calculate the guidance command as well as to determine the explosion time of the warhead. Since the range, however, is not directly measured by on-board sensors of the missile, it is usually estimated by filter-based techniques using angle-only measurements. Conventional filter-based techniques are complex and require huge computation. In this paper, we propose a range estimation algorithm based on the geometrical triangulation principle for two points of missiles and a target. The proposed algorithm has a simple structure but the accuracy is largely dependent on the measurement errors. To improve the accuracy of estimation, Digital Fading Memory Filter (DFMF) is applied. The performance of the proposed algorithm is analyzed through numerical simulations.

• Clinics in Shoulder and Elbow
• /
• v.1 no.1
• /
• pp.1-5
• /
• 1998

Rotator cuff disease is the most common cause of shoulder pain. Recent understanding of structure and mechanics enables scientific approach to the treatment of the cuff teat. It is an integral component in the normal movement and function of the shoulder. This article addresses current knowledge of the structure and biomechanics of the rotator cuff, and reviews various kind of operative treatment.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.250-254
• /
• 2002

In this paper, we design an optimized planar array structure with triangular lattice for side-lobe reduction using a genetic algorithm. A constraint optimization is implemented by optimally removing some outer array elements far from the array center. It is shown that only the proper array shape without optimizing the magnitudes and phases of each array antenna can give low side-lobe level with a slight main beam broadening.

• Korean Architects
• /
• no.7 s.327
• /
• pp.98-103
• /
• 1996

국민체육진흥공단에서는 올림픽기념관 건립을 위한 설계경기를 실시, 지난 5월21일 희림건축(이영희)안을 당선작으로 선정,발표했다. 총 13개 사무소에서 참여한 이번 설계경기는 한국 스포츠의 과거, 현재, 미래를 상징하는 삼각형태의 건축구조를 이루고 있는 당선작외에 우수작은 예도건축(김동찬)안이, 가작으로는 김상경건축(김상경), 모양건축(박민수), 모람건축(김흥수)안이 각각 선정됐다. 이 기념관은 오는 99년 완공될 예정이다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.127-130
• /
• 2006

사파이어 기판위에 MOCVD (metal organic chemical vapor deposition)를 이용하여 8주기의 InGaN/GaN 다중양자우물(multiple quantum well : MQW)구조가 성장되어졌고 이 구조 위에 p-GaN층이 형성됐다. 다시 p-GaN 위에 200nm의 두께를 갖는 PMMU 박막을 도포하고 electron beam lithography system을 이용하여 직경이 150nm가 되도록 나노단위의 삼각격자 구조를 가진 구멍을 패턴하고 inductively coupled plasma(ICP)를 이용하여 식각을 하여 광결정을 제작하였다. 광결정은 두께가 26nm이고 격자간격은 460nm로서 파장이 450nm인 파란빛을 나노회절 시켜서 photoluminescence(PL)의 세기를 강화시킨다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.510-515
• /
• 2011

In this paper, an artificial transmission line coupler with slotted-triangular patches, which is compact and spacesaving structure, is proposed. The proposed structure has specific features of not only convenience for adjusting the characteristic impedance and the phase of its coupled line by varying the lengths of the slots of the artificial transmission lines in designing a coupler but also the maximized coupling value at less than ${\lambda}$/4 electrical length so that it can be designed in compact and small dimensions, while conventional coupled line couplers are generally limited in compact and miniaturized designs by their ${\lambda}$/4 transmission lines. A fabricated 15 dB test-coupler at 2.4 GHz band by proposed design method shows good agreement with theory and simulation.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.17-26
• /
• 2024

Aircraft engines are exposed to high temperatures, high pressures, and stress caused by the rotation of the turbine shaft during flight. These loads can result in microcracks both on the inside and outside surfaces of the structure. Consequently, this can lead to structural defects and negatively impact the lifespan of the parts. To proactively prevent these defects, a finite element analysis is carried out to identify cracks. However, this process is time-consuming and requires significant effort due to the repetitive nature of crack modeling. This study aims to develop a crack modeling method based on the finite element model. To achieve this, the Constrained Delaunay Triangulation (CDT) technique is employed to triangulate the space while considering limitations on point connections. The effectiveness of this method is validated by comparing stress intensity factors for semi-elliptical cracks in plates and cylindrical vessels. This approach proves to be a valuable tool for crack analysis studies.