• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.27-32
• /
• 1994

For the improvement of seasoned kelp products, their processing conditions were examined. To find the optimal processing conditions for seasoned kelp, kelp was prepared by cooking for 0.5, 1.0, 2.0, 3.0 and 4.0 hrs at $80^{\circ}C$ in seasoning solution which contained $20\%$ sugar, $11\%$ sorbitol, $3.5\%$ NaCl and $1.6\%$ MSG. The penetration of seasonings into kelp increased with cooking time. Improved texture and seasoning penetration was achieved by using $3\%$ acetic acid in the seasoning solution. The seasoning component contents of the kelp seasoned varied within the following ranges: sugar $0.150{\sim}0.182\%$, sorbitol $0.085{\sim}0.127\%$, acetic acid $0.015{\sim}0.019\%$, MSG $0.21{\sim}0.37\%$, NaCl $0.30{\sim}0.40\%$, fructose $0.009{\sim}0.024\%$ and glucose $0.003{\sim}0.031\%$, respectively. Fructose and glucose were measured in seasoned kelp treated with acetic acid. Water activity of seasoned kelp varied from 0.36 to 0.48 according to seasoning composition.

• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.593-601
• /
• 2000

Seven domestic wheat cultivars, Suwon 261, Suwon 265, Eunpa, Kobun, Alchan, Olgru, and Kumgang, and a standard wheat, ASW(Australian Standard White Wheat), were compared in noodle-making properties. The ash contents of domestic wheats and flours were 0.1-0.3% higher than that of ASW. Therefore, domestic wheats required the control of ash contents during milling process. The protein contents which suggest the flour gluten content were 10.32, 11.3, and 9.57% in Suwon 261, Suwon 265, and Kumgang cultivars, respectively. Valorimeter values of Eunpa, Olgru, and Kumgang which indicate the dough formation time and stability were similar to that of ASW. Resistance rate of domestic wheats was lower than that of ASW. Maximum viscosity in Amylograph for Eunpa, Olgru, and Kumgang were in the range of 500-800BU, which were suitable for making noodles. Increase in weight and volume of Olgru noodle was negatively correlated with protein content. Turbidity was not positively correlated with weight and volume increase, but domestic cultivars except Suwon 265 and Eunpa showed a similar turbidity with ASW. The mechanical properties of wet and dry noodles were evaluated by TPA test before and after cooking. Springiness and cohesiveness of wet noodles increased by cooking, and the domestic cultivars showed higher values than ASW. Springiness and cohesiveness of dry noodle were not increased by cooking in any cultivars. Gumminess, chewiness and hardness of domestic wheat cultivars showed higher values than that of ASW. In the tensile test, wet noodles showed no difference between domestic cultivars and ASW. But dry noodles of domestic wheat cultivars showed higher values than ASW. In the color test for lightness, redness and yellowness, there were no differences between flour and dough of domestic wheat cultivars and ASW. In the sensory evaluation, Kumgang wheat cultivar was the most preferred among the wet and dry noodles of other domestic wheat cultivars and ASW. These results suggested Kumgang wheat cultivar to be a practical wheat variety for noodle-making.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.105-112
• /
• 1996

Physicochemical properties of Youngia sonchifolia were compared according to harvesting time and brine methods for its Kimchi preparation. Moisture contents in the roots and the leaves of Y. sonchifolia grown for 5 weeks was more than those grown for 11 weeks. 5-week-grown Y. sonchifolia contained more total free sugar than 11-week-grown ones, and among total free sugar the content of fructose was the most, and the contents of glucose and sucrose were rather high. The roots of 11-week-grown Youngia sonchifolia were harder than those of 5-week grown ones. When the roots were soaked in NaCl solution, the hardness decreased with time. Salt concentration of the Kimchi of Y. sonchifolia increased by the brined material of the Kimchi with soaking time.Salt concentration of the Kimchi was higher in the leaves than in the roots.The roots and leaves of Y.sonchifolia grown for 11 weeks contained organic acids such as malic acid, oxalic acid, succinic acid,lactic acid, and citric acid,among which major organic acids were malic acid, oxalic acid, succinic acid, whereas lactic acid and citric acid were minor organic acids.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.209-221
• /
• 2007

Numerical analysis was performed to investigate the effect of heavy metal contamination on neighboring environment in case a dam is constructed by using rockfill materials contaminated by heavy metals. The numerical simulation carried out in this research includes both subsurface flow and contaminant transport in the inside of the CFRD(Concrete Faced Rockfill Dam), using two commercial programs, SEEP2D and FEMWATER. The three representative cases of scenarios were chosen to consider a variety of cases occurring in a dam site; (1) Scenario 1 : no crack in the concrete face slab, (2) Scenario 2 : a crack In the upper part of face slab, and (3) Scenario 3 : a crack between plinth and face slab in the lower part of face slab. As a result of seepage analysis, the amount of seepage in scenario 2 was calculated as $14.31\sim14.924m^3/day$ per unit width, corresponding to the 1,000 times higher value than that in other scenarios. Also, in the simulation of contaminant transport by using FEMWATER, specified contaminant concentration of 13 ppb in main rockfill zone was set to consider continuous leakage from the rock materials. Through the analysis of contaminant transport, we found that elapsed times to take for the contaminant concentration of about 2 ppb to arrive at the end of a dam are as follows. Scenario 1 has the elapsed time of 55,000 years. In Scenario 2. it is 50 years. Finally, scenario 3 has 27,000 years. The rapid transport of the contaminant in scenario 2 was attributed to greater seepage flow by 500 times than other scenarios. Although, in case of upper crack in the face slab, it was identified that the contaminant might transport to the end of a dam within 100 years with about 2 ppb concentration, however, it happened that the contaminant was hardly transported out of the dam in other scenarios, which correspond to either no crack or a crack between plinth and face slab. In conclusion, the numerical analysis showed that the alternative usage of the contaminated sand and gravel as the dam embankment material can be one of the feasible methods with the assumption that the cracks in a face slab could be controlled adequately.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.741-746
• /
• 2008

Many methods have been introduced to protect the corrosion of embedded steel in RC structure. One of the methods that restrain corrosion of steel is corrosion inhibitor. The technology that delayed the progress of corrosion is developed recently by converting active rust to passive rust. However, the performance for concrete structure is not fully examined because this corrosion inhibitor is developed for normal metal product. In this study, the application of corrosion inhibitor that use tannin acid is investigated by concrete specimen. According to the results, tannin acid corrosion inhibitor does not occur reduction of workability and strength in concrete. When corrosion inhibitor is added more than 4% per cement weight, the penetration depth of chloride decrease about 10%. Also, corrosion resistance of concrete is improved because tannin acid corrosion inhibitor has an effect on converting the rust of steel into stable state. It is showed in special that the addition more than 6% is effective in corrosion resistance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.195-195
• /
• 2022

도림천의 최상류인 관악산 유역에 서울대학교 관악캠퍼스가 건설되었다. 이로 인해 물순환은 기존의 자연 상태에서 점점 변해 왔는데, 이는 하류 도림천의 홍수 및 수질 오염의 피해를 증가시켰다. 도시화된 서울대학교 관악캠퍼스의 물순환 회복은 하류 홍수피해 방지와 지속 가능한 친환경 캠퍼스를 위해 중요하나, 이에 관한 연구는 미흡한 실정이다. 따라서 본 연구에서는 SWMM(Storm Wastewater Management Model)을 활용하여 캠퍼스 내 물순환 현황을 시간과 공간에 대해 정량적으로 파악하고, 물순환 회복을 위해 지속 가능한 효율적인 시스템을 구현하고자 한다. 먼저 유역 현황 조사와 함께 SWMM 구축에 필요한 수문·기상학적 변수와 물리적 매개변수를 확립하였다. 수문·기상학적 변수로는 기상관측장비 ATMOS-41의 설치와 기상청 자료로부터 수집하였으며, 물리적 매개변수는 환경부의 자료를 활용하였다. 그 후, 서울대-도림천 배수분구에 대해 SWMM을 적용하여 월별로 유출량, 침투량, 그리고 증발산량을 모의하였다. 시간에 따른 물순환 분석의 경우 강수량 자료와 불투수율의 변화 정도에 따라 월별 물수지 비율을 파악하고, 공간에 따른 물순환 분석의 경우 동일한 기간에 대해 분할한 16개의 소유역 별 유출량과 유역의 평균 유출량을 비교하여 분석하였다. 대상 유역의 월별 물수지 비율을 모의하는데 효율성을 높이고자 배수 구역 및 관망을 세밀하게 나눈 경우와 그렇지 않은 경우에 대해 분석하였다. 그 결과, 시간에 따른 연평균 물수지 비율의 차이는 2020년 모의 결과와 최근 5년 평균(2015~2019년) 모의 결과 비교 시 각 물수지 항목별로 0.47~2.34%의 차이를 보였다. 공간적으로는 16개 소유역 중 저류시설을 포함한 9개 소유역의 표면 유출량이 유역의 평균 유출량보다 많게 모의 되었다. 또한, 유역을 구성할 때보다 관망을 구성할 때 높은 정확성이 요구됨을 알 수 있었다. 본 연구는 ATMOS-41을 통한 지속적인 수문·기상학적 요소의 모니터링과 SWMM 모델 구축을 통해 앞으로도 변경사항을 추가함으로써 친환경 캠퍼스로의 전환에 이바지할 것으로 기대한다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.509-518
• /
• 2002

The purpose of this study was to evaluate the bonding of compomer to deciduous dentin which is known to have been developed to improve the weak properties of glass ionomer cement and composite resin. 120 sound primary molars were used for the shear bond strength test and another 24 for the scanning electron microscopic evaluation. Each material was ailed into polyethylene mold attached to exposed dentinal surface($3{\times}4mm$ in diameter) of sample blocks. Shearbond strength was measured using Universal testing machine and data were analyzed statistically with Oneway-ANOVA and Scheffe test. Scanning electron microscopic observation was performed in order to evaluate the pattern of distribution and penetration of resin tags and hybrid layer. Compomer groups(II-V) showed significantly higher bond strength values than glass ionomer group(I)(p<.05). Etching-compomer groups(III, V) showed the significantly higher bond strength than non-etching compomer groups(II, IV)(p<.05), but slightly lower values than composite resin group(VI) with no statistically significant difference(p>.05). No significantly different bond strength was found between compomer groups of different bonding system(p>.05). Scanning electron micrographs showed more irregular distribution of short and thin resin tags in non-etching compomer groups(II, IV) whereas the more regular and intimate distribution of long and thick tags in etching compomer groups(III, V) and composite resin group(VI). The evaluation of hybrid layer also showed more regular formation of thicker layer in etching compomer groups(III, V). Based on the results of present study, the use of compomer as an esthetic restorative material for primary molars might be justified.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.83-83
• /
• 2012

면섬유는 강우량, 일조량, 온습도, 영양분 등의 성장환경조건과 유전인자 및 추수방법에 따라서 섬유길이, 단면구조, 꼬임, 성숙도 등이 다양하게 변화한다. 면섬유에는 pectin, cotton wax, 지방질, 단백질계 물질, 자연색소 및 무기질 등의 불순물을 약 5% 함유하고 있다. 이러한 물순물을 제거하여 처리액의 침투성 향상을 돕고, 백도를 증진시키기 위해 전처리를 한다. 본 연구에서는 산지별로 생산되는 원면의 특성을 알아보기 위해 중국, 인도, 인도네시아, 파키스탄에서 원면을 각각 수입한 후 동일한 조건으로 편직하였다. 4개국 원면의 꼬임과 단면형태를 관찰하고, 불순물의 함량을 알아보았으며, 정련과 표백처리를 농도별로 진행하여 전처리조건이 염색성에 미치는 영향을 알아보았다. 정련 및 표백조건을 20% 씩 증가시켜가며 전처리를 하였고 농도별로 전처리된 시료를 Yellow 색상의 반응성 염료 0.005% (owf)로 염색한 후 자동컬러측색장치(CCM)를 사용하여 색차, Yellow Index(Y.I.), White Index(W.I.)를 비교분석하였다. 결과를 보면 인도산 원면이 다른 원면에 비해 Y.I.와 W.I.에서 다소 차이를 보였고, 염색현장과 조제업체에서 제시한 표준 전처리조건을 참고로 하였을 때, 표준 전처리조건 대비 0 ~ 40% 농도까지는 색상차이가 크게 나타나지만 60% 농도 이상에서는 색상차이가 크지 않았다. 이 결과로부터 산지별 원면의 전처리시 최소한의 조제투입량으로 최적의 전처리효과를 볼 수 있는 전처리공정조건을 설정할 수 있었고, 이로써 원가절감 및 오폐수감소 등의 효과를 기대할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1310-1314
• /
• 2008

수도권 지역의 신도시 개발에 따른 유역의 도시화와 인구 증가는 유역의 피복상태를 변화시키고, 생태계에 영향을 미치는 수문학적 과정과 하천수질의 변화를 초래하게 된다. 지표면의 침투, 침루 및 토양함수량을 변화시키고, 차단저류량과 요지저류량(depression storage) 등을 변화시킴으로서 유출량과 수질을 변화시키게 되는 것이다. 이와 같은 수문학적과정을 평가하기 위해서는 수문모형을 사용하는데 본 연구에서는 미국 농림부에서 개발한 SWAT모형을 이용하였다. SWAT-K모형은 SWAT(Soil and Water Assessment Tool) 모형에 인위적, 자연적인 물순환 구조변화와 지표수-지하수 연계 해석 등을 개선하여, 강우 증발산 토양수분 지표수 지하수 등의 시, 공간적 분포를 정량적으로 산정하는 장기유출 해석 모형이다. 또한, 본 모형의 적용을 위하여 GIS를 이용한 공간정보를 처리하여 수문모형의 매개변수를 결정하는 방법이 널리 사용되고 있는데, 본 연구에서는 ArcView GIS를 이용하여 입력자료를 구축하였다. 대상유역은 판교유역으로서 신도시 개발이 한창 진행되고 있는 지역으로서, 개발 과정에 따라 수문특성, 유출특성, 수질변화 특성 등이 계속하여 변화되고 있으며, 개발이 완전히 종료된 이후의 특성을 예측할 필요가 있는 유역이다. 본 연구에서는 SWAT-K모형을 이용하여 판교 신도시 개발에 따른 장기유출량을 예측하였고 모델의 매개변수를 최적화하였으며, 그 결과 본 모델이 장기 유출량 해석 및 판교유역의 수문변화를 평가하는데 유용하게 적용될 수 있을 것으로 판단되었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.4
• /
• pp.331-336
• /
• 2009

수소가 Pt/$MoO_3$로 흡장되는 현상을 XRD, TEM, CO 화학흡착 분석방법을 사용하여 조사하였다. 소성과정은 Pt/$MoO_3$ 촉매의 Chlorine 함유량을 감소하며 박막을 형성하였다. 소성전과 비교하여 수소 흡장량은 소성 후에 증가하였다. Orthorhombic Pt/$MoO_3$은 Hexagonal Pt/$MoO_3$보다 항상 수소 흡장량이 증가하였다. 상대적으로 Hexagonal Pt/$MoO_3$에서 수소 흡장량이 감소하는 이유는 Hexagonal 결정격자 내에 존재하는 $NH_4^+$ 이온에 기인하는 것으로 판단된다. 결정격자 내부로의 수소 침투시 암모니움 이온이 수소내부 기공에 장애물 역할을 하므로, 수소 흡장량이 감소하는 것으로 판단된다.