• Resources Recycling
• /
• v.20 no.4
• /
• pp.65-70
• /
• 2011

Environmental friendly leaching process for the recovery of cobalt and lithium from the $LiCoO_2$ was investigated by organic acids as a leaching reagent. The experimental parameters, such as organic acid type, concentrations of leachant and hydrogen peroxide, reaction time and temperature as well as the pulp density were tested to obtain the most effective conditions for the leaching of cobalt and lithium. The results showed that the latic acid was the most effective leaching reagent for cobalt and lithium among the organic acids and was reached about 99.9% of leaching percentage respectively. With the increase of the concentration of citric acid, hydrogen peroxide and temperature, the leaching rate of cobalt and lithium increased. But the increase of pulp density decreased the leaching rate of cobalt and lithium.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.2
• /
• pp.55-64
• /
• 2007

An analytical method using ion-exchange chromatography was developed for simultaneous quantification of low-molecularweight organic acids ($C_1-C_6$ aliphatic carboxylic acids) and inorganic anions, and then applied to the assessment of ground water contaminated by leachates from a municipal solid waste landfill. Peak interferences of halide ions to organic acids were removed by pretreatment of water samples with Ag-containing cartridges. This method allowed accurate detection of low-molecular weight organic acids (i.e., formate, acetate, propionate, pyruvate, succinate, and oxalateas) low as 0.5 mg/L with a linear dynamic range up to 20 mg/L within 11 min run time along with typical inorganic anions. High level of pyruvate and low level of formate and acetate were detected in groundwater and landfill leachates using the analytical method. Pyruvate concentration in groundwater showed a significant correlation with concentrations of $Cl^-$ and $HCO_3^-$, and pyruvate levels decreased along the downgradient from the landfill, indicating the sources of pyruvate are landfill leachate.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.332-337
• /
• 2008

Purification of silica mineral was compared with various leaching methods such as shaking, stirring, ultrasonic with 2.5% HF/HCl solution. Among them, ultrasonic method showed a best leaching effect. From the leaching experiment, Na, K, Fe, Al exist as the major impurity elements. The removal rate of Al, Fe showed little difference with various leaching methods but Ca, Mn, Na were very different. Four kinds of silica mineral (>99% purity) after physical purification treatment were used for ultrasonic leaching experiment. Among them IN-Si had a highest impurity removal rate. Ca, Cr, K, Zn were removed above 80% using ultrasonic leaching method and Fe was also removed above 60%. But Al showed 10~60% removal rate with different samples.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.30-36
• /
• 2017

Leaching experiments of anode slime were performed with several inorganic acids (HCl, $HNO_3$ and $H_2SO_4$) together with thiourea and thiosulfate solution to recover gold and silver. Gold was not dissolved at all into these inorganic acids in the absence of any oxidizing agents. At the same concentration of inorganic acid, the leaching of percentage of Ag was the highest in the sulfuric acid solution. The leaching percentage of silver increased with the increase of HCl concentration owing to the formation of $AgCl_2{^-}$. Copper, nickel and zinc except tin was almost dissolved in these inorganic acids but no tin was dissolved in nitric acid solution. Most of Au and Ag were dissolved into the mixture of sulfuric acid and thiourea solution. Thiosulfate could dissolve some silver from the anode slime but no gold was dissolved by this agent.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.247-253
• /
• 2007

The effect of heat treatment and acid leaching of siliceous mudstone on the purity of silica precursors, such as sodium silicate and silicic acid, was studied. As well as the temperatures for the heat treatment of siliceous mudstone, the concentrations of hydrochloric acid and sulfuric acid were varied to achieve the highest content of silicon in the precursors while minimizing energy and chemical consumption. It was found that the optimum conditions were achieved at the heat treatment temperature of $600^{\circ}C$ and hydrochloric acid of 1.56 M. The relative concentrations of silicon in the synthesized sodium silicate and silicic acid were as high as 99.2 and 99.5%, respectively.

• Journal of the Korea Convergence Society
• /
• v.7 no.1
• /
• pp.155-160
• /
• 2016

The convergence process utilized both leaching and ion exchange techniques has been investigated for the heavy metals removal in the abandoned mine of Chungyang Province, Korea. The contaminated soil samples by heavy metals from Samkwang mine were analysed by statistical analyses. The highly contaminated soils was initially separated by the flotation process. The selectivity indices were increased with increasing flotation reagents. The selectivity of separation was then improved by the use of both leaching and ion exchange processes in order to extract the heavy metals. The results of this study showed that the higher the sulfuric acid concentration, the leaching rate of heavy metals was increased. The lecheate then was removed by the ion exchange method. The anticipating results might imply that convergence process utilized both leaching and ion exchange techniques would somehow apply for the removal of heavy metals in the abandoned mine.

• Food Science and Preservation
• /
• v.15 no.4
• /
• pp.593-597
• /
• 2008

This study was performed for obtaining optimal extraction conditions to produce peach liqueur containing chitosan. Alcohol content of unsliced fruits was the largest recording 30% after extracting for 8 weeks and those of fruits sliced into four pieces were high recording around 28% after extracting for $6{\sim}8$ weeks. Sugar content was $11{\sim}13^{\circ}Brix$, total acidity was around 0.2% and pH was about 4.8. While soluble solids content was around 2.8% in unsliced fruits with a little change of the content, those of fruits sliced into four pieces were ranged from 2.8% to 3.1% and showing a tendency that longer extraction time increased the content. Brownness of unsliced fruits and fruits sliced into four pieces were $0.33{\sim}0.54$ and $0.56{\sim}0.73$ respectively. Total phenol content showed a similar tendency with brownness and the total phenol content of sliced fruits was higher than that of unsliced fruits by only around 0.2 mg%. When peach liqueur was made by extracting unsliced fruits massively by following conditions set above, methanol content grew with longer extraction time but the difference was not significant and the content was detected to be extremely small recording about 50 ppb. Among organic acids, oxalic, malic and citric acids were found, and fructose, glucose, sucrose and maltose were detected as free sugars. In conclusion, extracting unsliced fruits for 8 weeks as extraction conditions showed an excellent quality in overall for peach liqueur containing chitosan.

• Analytical Science and Technology
• /
• v.20 no.6
• /
• pp.516-523
• /
• 2007

Purification of silica mineral has been investigated by acid leaching of pulverized silica. A series of studies has been carried out on the effect of leaching silica powder as a function of the leaching time at the constant temperature of $80^{\circ}C$ in oxalic acid, aqua regia, and two mixed acids of HF/HCl, $HF/HNO_3$. The impurities of silica and leachantes were measured by neutron activation analysis (NAA), inductively coupled plasma atomic emission spectrometry (ICP-AES), atomic absorption spectrometry, x-ray fluorescence (XRF) method and wet analysis (WA). Certain metals, such as sodium, calcium, iron, aluminium and titanium, have been found in concentrations of hundreds or even thousands of mg/kg. Comparison of purification processes of silica and analytical methods of impurities in the silica was conducted in this study.

• Clean Technology
• /
• v.30 no.2
• /
• pp.105-112
• /
• 2024

Globally, the demand for electric vehicles has surged due to greenhouse gas regulations related to climate change, leading to an increase in the production of used batteries as a consequence of the battery life issue. This study aims to selectively leach and recover valuable metal lithium from the cathode material of spent LFP (LiFePO₄) batteries among lithium-ion batteries. Generally, the use of inorganic acids results in the emission of toxic gases or the generation of large quantities of wastewater, causing environmental issues. To address this, research is being conducted to leach lithium using organic acids and other leaching agents. In this study, selective leaching was performed using the organic acid methane sulfonic acid (MSA, CH₃SO₃H). Experiments were conducted to determine the optimal conditions for selectively leaching lithium by varying the MSA concentration, pulp density, and hydrogen peroxide dosage. The results of this study showed that lithium was leached at approximately 100%, while iron and phosphorus components were leached at about 1%, verifying the leaching efficiency and the leaching rates of the main components under different variables.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.67-76
• /
• 2017

In order to efficiently recycle waste industrial nickel-cadmium batteries, anodic and cathodic materials were crushed by a cut mill and classified by sieves. We used wet magnetic separation method for eliminating iron components from the crushed powders. In addition, the acid leaching test for the obtained anode and cathode powders was carried out under various conditions by means of the wet process. At the optimum leaching conditions with 2.0 M $H_2SO_4$ at $90^{\circ}C$, 15 wt $H_2O_2$ and L/S=20 for 3 hours, the leaching efficiency of nickel and cadmium was 99%, respectively.