• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.424-428
• /
• 1998

Mn-Ni oxide thin films for NTC thermistor application were deposited on alumina substrates by using rf magnetron sputter. Effects of various substrate temperatures and annealing temperatures on the microstructure. crystal phase, resistivity and B constant were investigated. Microstructure of the films deposited below 178$^{\circ}C$ was fibrous microcrystalline and at 32$0^{\circ}C$and 40$0^{\circ}C$their microstructure was changed to columnar grain structure. After annealing at 90$0^{\circ}C$, the microstructure was transformed to equiaxed grain structure. Most of the phases were mixture of cubic spinel and $Mn_2O_2$ The crystal phase of the film deposited at 40$0^{\circ}C$ was changed to cubic spinel after annealing above 700"c. As the substrate temperature increased, the resistivity and B constant were greatly decreased, and these values become low and stable after annealing between $600^{\circ}C$and $700^{\circ}C$, All thin films deposited in the present study showed NTC thermistor characteristicsstics.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.37-52
• /
• 1998

The granites in the Jeomchon area can be divided into hornblende biotite granite (Hbgr), deformed biotite granite (Dbgr), deformed pinkish biotite granite(Dpbgr), biotite granite (Btgr), and granite porphyry(Gp). These granites show metaluminous, 1-type and calc-alkaine characteristics from their whole-rock chemistry. Hbgr and Dbgr belong to ilmenite-series granitoids, but Gp to magnetite-series. Dpbgr and Btgr show the intermediate nature between ilmenite- and magnetite-series. Tectonic discriminations indicate that Hbgr and Dbgr were formed in active continental margin environment, whereas Dpbgr, Btgr, and Gp in post-orogenic and/or anorogenic rift-related environment. From the Harker diagrams major oxide contents of Hbgr and Dbgr show a continuous variation with $SiO_2$, indicating that they are genetically correlated with each other. On the other hand, any correlation of major oxides variation cannot be recognized among Dpbgr, Btgr and Gp. It seems like that Hbgr and Dbgr were derived from a same parent granitic magma, judging from their occurrence of outcrop, mineral composition as well as whole-rock chemistry. Variation trends of major oxide contents between Hbgr and Baegnok granodiorite are very similar and continuous. If the two granites were derived from a cogenetic magma, there exists a possibility that the granitic bodies had been separated by Btgr and Gp of Cretaceous age. Three stages of the granitic intrusions are understood in the Jeomchon area. After the intrusion of Hbgr and Dbgr during middle to late Paleozoic time, Dpbgr emplaced into the area next, and finally Btgr and Gp intruded during Cretaceous time. Tectonic movement accompanying shear and/or thrust deformation seems likely to have occurred bewteen the intrusions of Dpbgr and Btgr.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.291-298
• /
• 2016

Electrochemical water treatment process as a useful treatment method for the removal of non-degradable matter has been consistently studied for several decades. Key process of electrochemical water treatment are oxidation reaction from an anode and reduction from a cathode. In this study, the effect of pre-treatment methods in the insoluble electrode manufacturing process for the water treatment has been evaluated for the life time of electrode The results of this study showed that pre-treatment methods of a base metal such as surface roughness, clean method and interlayer formation influenced to life time of electrode when the same condition (catalyst electrode layer coating method and material system) was applied for pre-treatment methods. This study was conducted by using $IrO_2/Ti$ electrode In the test of sand-blasting process, an electrode manufactured by using sanding media of different sizes resulted in the most effective electrode life time when the size of alumina was used for $212{\sim}180{\mu}m$ praticle size (#80). The most effective method was considered using arc plasma in the additional roughness control and cleaning process, sputtering method to form Ta type interlayer formation process.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.185-209
• /
• 1997

Granitic rocks in the Cheongsan area cosist of three plutons-Baegrog granodiorite, Cheongsan porphyritic granite, and two mica granite. Amphilboles from the Baegrog granodiorite belong to the calcic amphilbole group and show compositional variations from magnesio-hornblende in the core to actinolitic hornblende in the rim. Biotites from the three granites represent intermediate compositions between phlogopite and annite. Muscovites from the two mica granite are considered to be primary muscovite in terms of the occurrence and mineral chemistry. Each granitic rock reveals systematic variation of major oxide contents with $SiO_2$. Major oxide variation trends of the Baegrog granodiorite are fairly different from those of Cheongsan porphyritic granite and two mica granite. The latter two granitic rocks are also different with each other in variation trends for some oxides. Thus three granitic rocks in the Cheongsan area were solidifield from the independent magmas of chemically different, heterogeneous origin. The granitic rocks in the area show calc-alkaline nature. The whole rock geochemistry shows that the Baegrog granodiorite and Cheongsan porphyritic granite belong to metaluminous, I-type granite, whereas the two mica granite to peraluminous, I/S-type granite. The opaque mineral contents and magnetic susceptibility represent that the granitic rocks in the area are ilmenite-series granite, indicating that each magma was solidified under relatively reducing environment. The tectonic environment of the granitic activity in the area seems to have been active continental margin. Alkali feldspar megacryst in the Cheongsan porphyritic granite is considered to be magmatic, judging from the crystal size, shape, arrangement, and distribution pattern of inclusions. The petro-graphical characteristics of the Cheongsan porphyritic granite can be explained by two stage crystallization. Under the smaller degree of undercooling the alkali feldspar megacrysts rapidly grew owing to slow rate of nucleation and fast growth rate. At the larger degree of undercooling the nucleation rate and density drastically increased and the small crystals of the matrix were formed.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.317-321
• /
• 2009

In order to analyze the high temperature phase formation and the sinterability of super ionic conductor $K^+-{\beta}/{\beta}"-Al_2O_3$ which is commonly used as a solid oxide electrolyte, the pure $K^+-{\beta}/{\beta}"-Al_2O_3$ powder in the ternary system $K_2O-LiO_2-Al_2O_3$ was synthesized by solid state reaction and formed to tube and disk using slip casting method and cold isostatic pressing (CIP), respectively. The slip casting was conducted in an alumina mold with the slurry containing 40 wt% of solid contents and the CIP was carried out under 20 MPa. The samples were sintered at $1600^{\circ}C$, $1700^{\circ}C$ and $1750^{\circ}C$, respectively, and their phase formation and the sintering density were investigated according to the forming method. The samples produced by CIP showed far higher ${\beta}"-Al_2O_3$ fraction as compared with those by slip casting. On the other hand, the samples by slip casting showed slightly higher sintering density. The relative density reached to about 83% at $1750^{\circ}C$ and for 1 h, independent of the forming method. In the case of 90 min socking time, the density was decreased owing to the exaggerated grain growth and the pores by $K_2O$ evaporation.

• Journal of Sensor Science and Technology
• /
• v.10 no.4
• /
• pp.222-231
• /
• 2001

The material properties of $SnO_2$ were investigated as a function of the amount of $Fe_2O_3$, the partial pressure of oxygen, the concentration of CO gas, and temperature. $Fe_2O_3$-doped $SnO_2$ thick films were prepared by the screen printing technique on alumina substrate. The specimens sintered at $700^{\circ}C$ for 6 hours showed little difference of the grain size and narrow distribution with the content of $Fe_2O_3$. The electrical conductance of undoped $SnO_2$ is high at low firing temperature and at low partial pressure of oxygen. The electrical conductance of $Fe_2O_3-$-doped $SnO_2$ is increased with measurement temperature, but decreased with the content of $Fe_2O_3$. The dependence of oxygen partial pressure is decreased with dopant addition. The highest sensitivity and the good properties of response speed and repeatability for CO gas were observed on the specimen with 0.1 mol% $Fe_2O_3$ at $350^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.445-449
• /
• 2012

We investigate the effects of redox reaction on preparation of high purity ${\alpha}$-alumina from selectively ground aluminum dross. Preparation procedure of the ${\alpha}$-alumina from the aluminum dross has four steps: i) selective crushing and grinding, ii) leaching process, iii) redox reaction, and iv) precipitation reaction under controlled pH. Aluminum dross supplied from a smelter was ground to separate metallic aluminum. After the separation, the recovered particles were treated with hydrochloric acid(HCl) to leach aluminum as aluminum chloride solution. Then, the aluminum chloride solution was applied to a redox reaction with hydrogen peroxide($H_2O_2$). The pH value of the solution was controlled by addition of ammonia to obtain aluminum hydroxide and to remove other impurities. Then, the obtained aluminum hydroxide was dried at $60^{\circ}C$ and heat-treated at $1300^{\circ}C$ to form ${\alpha}$-alumina. Aluminum dross was found to contain a complex mixture of aluminum metal, aluminum oxide, aluminum nitride, and spinel compounds. Regardless of introduction of the redox reaction, both of the sintered products are composed mainly of ${\alpha}$-alumina. There were fewer impurities in the solution subject to the redox reaction than there were in the solution that was not subject to the redox reaction. The impurities were precipitated by pH control with ammonia solution, and then removed. We can obtain aluminum hydroxide with high purity through control of pH after the redox reaction. Thus, pH control brings a synthesis of ${\alpha}$-alumina with fewer impurities after the redox reaction. Consequently, high purity ${\alpha}$-alumina from aluminum dross can be fabricated through the process by redox reaction.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.3
• /
• pp.161-177
• /
• 2004

The Cretaceous pink granites of the finan area, southwestern Ogcheon belt, are adjacently developed in the eastern part (Keg) and western part (Kwg) as stocks, respectively. Keg of rounded shape occur as mainly medium-coarse grained rocks, whereas Kwg of ellipsoidal shape occurs as medium-coarse grained ones with partly porphyritic and fine-grained textures. Miarolitic cavities of them are often seen and can be observed more frequently in Kwg than Keg. Rose and counter fracture diagrams of the two granites show that Keg and Kwg have more potentiality of non-dimension and dimension to non-dimension stones, respectively. Physical properties such as porosity and absorption ratio have 0.25% and 0.65％, and 0.43% and 1.11%, respectively, which could suggest that emissions of gas phase at later magma stages are abundant in Kwg than those of Keg. From the major and trace elements petrochemisoy, they belong to acidic, peraluminous and calc-alkaline rocks, showing that Kwg are later product than Keg of the same granitic parent magma. REE concentrations normalized to chondrite value have trends of gradual and parallel enriched LREE and depleted HREE. Eu negative anomalies of Kwg are far more severe than those of Keg, which suggest that plagioclase fractionation in Kwg was much stronger than that of Keg. In the magnetic susceptibility vs. petrochemical and modal parameters, they all belong to magnetite-series and I-types, and can be classified as weakly-moderately ferromagnetic rocks. And the above relations could suggest that their susceptibility values are more mainly depended on ferromagnetic opaques than ferromagnetic and paramagnetic assemblages (Bt ＋ Ch ＋ Ser ＋ Op).

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.155-155
• /
• 2011

용융탄산염 연료전지(MCFC)는 $650^{\circ}C$에서 작동하는 고온형 연료전지 시스템이다. 이 시스템은 천연가스 등을 개질하여 생산된 수소를 바로 전기로 생산할 수 있는 시스템으로 열효율이 높으며, 현재 대체 발전시스템으로 각광을 받고 있다. MCFC는 개질방식에 따라 내부개질 방식과 외부개질 방식이 있다. 내부개질 방식은 수소를 생산하는 개질기가 스택내부에 장착된 형식으로 천연가스를 스택내부에서 개질하여 바로 전기를 생산하는 방식이다. 이 내부개질반응에 사용되는 촉매로는 알루미나에 고함량 (약 50 wt.%)으로 담지된 니켈(Ni) 계열촉매이 주로 쓰이고 있다. 이 고함량으로 담지된 촉매는 대부분 높은 활성을 보인다. 비교적 낮은 온도 운전조건 (약 $580{\sim}620^{\circ}C$)을 가지는 MCFC 내부개질에 적용하기 위해서는 활성점인 니켈을 최대한 담지체에 고르게 분산 시켜야한다. 이를 위해서 MgO를 이용하여 촉매의 활성점을 높게 분산시키는 연구를 진행 하였다. 촉매를 제조하는 방법으로 요소(urea)를 이용한 균일용액침전법을 이용하였다. 니켈함량은 50 wt.%로 고정을 한 다음, MgO 양과 $Al_2O_3$ 양을 각각 0 ~ 45 wt.%와 5 ~ 50 wt.%로 조절하면서 촉매를 제조하여 그 특성들을 분석하였다. 물성을 비교하기 위해서, X-선 회절분석 (XRD) 및 TPR, 물리화학흡착 실험을 하였다. 촉매의 활성을 살펴보기 위해서, fresh 상태 및 피독 상태에서 메탄수증기 개질활성 실험을 실시하였다. MgO 함량이 없거나 적은 촉매에서는 높은 BET surface area와 작은 NiO, metallic Ni 결정 크기가 나타났다. 반면 MgO 함량이 높은 촉매에서 낮은 BET surface area와 비교적 큰 NiO, metallic Ni 결정 크기가 나타났다. 또한 XRD 분석에서 MgO 함량이 증가할 수 록 MgO 결정 피크가 명확히 나타났으며, $MgAl_2O_4$ 피크는 나타나지 않았다. TPR 분석에서 촉매들의 환원 피크를 측정한 결과, 저함량의 MgO를 포함한 촉매는 $700^{\circ}C$ 부근에 환원 피크가 관찰되었고 MgO가 고함량인 촉매는 환원 피크가 $400^{\circ}C$ 부근에서 관찰되었다. 촉매의 초기 fresh 상태에서의 활성은 고함량 MgO를 포함한 Ni-90M10A 샘플을 제외하고 모든 촉매가 거의 비슷하게 나타났다. 그러나 $K_2CO_3$ 피독 상태에서는 MgO 함량이 증가할 수 록 활성이 좋지 않았음을 알 수 있었다. 따라서 MgO가 소량 포함된 촉매의 경우 fresh 상태에서는 우수한 물성과 활성을 보이지만, 피독상태에서는 MgO가 포함되지 않은 Ni-$Al_2O_3$ 촉매가 우수한 활성을 보였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.799-807
• /
• 2006

The catalytic activity of $Pt/{\gamma}-Al_2O_3$ catalysts for the oxidation of toluene and toluene+xylene mixture was investigated in the microreactor of fixed-bed type. The calcination temperatures and loadings of $Pt/{\gamma}-Al_2O_3$ catalysts played the important role in the activity of catalysts for the oxidation of toluene. The increasing calcination temperatures and loadings of $Pt/{\gamma}-Al_2O_3$ catalysts increased the crystallite size of the platinum to result in the higher oxidation activity of catalysts. The catalytic activity for the toluene oxidation over $Pt/{\gamma}-Al_2O_3$ catalysts turned out to be increasing in the order of $500^{\circ}C\;<\;800^{\circ}C<600^{\circ}C\;<\;700^{\circ}C$ for calcination temperatures and 0.1 wt% < 0.3 wt% < 1.0 wt% for platinum loadings, respectively. The 1.0 wt% $Pt/{\gamma}-Al_2O_3$ catalysts calcined at $700^{\circ}C$ for 3 hrs in the air showed the highest activity for the oxidation of the toluene. The decrease of oxidation activity of $Pt/{\gamma}-Al_2O_3$ catalysts calcined at $800^{\circ}C$ might result from the decrease of active sites by sintering of platinum metals as well as ${\gamma}-Al_2O_3$ supports. The 1.0wt% $Pt/{\gamma}-Al_2O_3$ catalyst showed the activity from the lower temperature at $120^{\circ}C$, reached the light-off temperature ($T_{50%}$) at $180^{\circ}C$, and leveled off its activity at $340^{\circ}C$ with the conversion of 100% 'Mutual promotion' effects were observed for the binary mixture of toluene and xylene. The activity of the easy-to-oxidize toluene was slightly increased with the existence of the xylene. It might suggest the different mechanism for the oxidation of toluene and xylene on the $Pt/{\gamma}-Al_2O_3$ catalysts on different sites, and its reaction of gaseous oxygen.