• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.27-36
• /
• 2019

The demand for a low dispersion lens with a small refractive index and a high refractive index is increasing, and accordingly, there is an increasing need for a releasable protective film with high heat resistance and abrasion resistance. On the other hand, the optical industry has not yet established a clear standard for the manufacturing process and quality standards for mold-releasing protective films used in aspheric glass lens molding. Optical lens manufacturers treat this technology as proprietary information. In this study, an experiment was conducted regarding the optimization of ion etching, magnetron, and arc current at each source and filter part, and bias voltage in FCVA (filtered cathode vacuum arc)-based Ta-C thin film coatings. This study found that compared to iridium-rhenium alloy thin film sputtering products, the coating conditions were improved by approximately 50%, 20%, and 40% in terms of thickness, hardness, and adhesive strength of the film, respectively. The thin-film coating process proposed in this study is expected to contribute significantly to the development and utilization of glass lenses, which will help enhance the minimum mechanical properties and quality of the mold-release thin film layer required for glass mold surface forming technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.650-658
• /
• 2017

A grounding system in a large-scale apartment complex consists of a TT grounding system when viewed in each building unit, but the characteristics of TN grounding system appears when viewed in the total ground system function. Therefore, this study examined the characteristics of a grounding system in a large-scale apartment complex using design draft, field measurements and PSCAD/EMTDC modeling. This paper proposes an algorithm for fault analysis depending on the grounding system structure in large-scale apartment complexes considering the connection of the underground culvert as well as a design algorithm for each grounding system considering the contact voltage and step voltage. The simulation results based on the proposed modeling and algorithm confirmed that it is useful for analyzing the characteristics of a grounding system in a large-scale apartment complex.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.1-8
• /
• 2020

This paper proposes architectural and evacuation recommendations through evacuation experiments of two child care centers with disabilities. To achieve these purposes, a survey on the architectural characteristics and evacuation experiments was carried out. The results were as follows: (1) the child care center with disabilities were located within one kilometer or five minutes from a fire station and 119 safety center, but the architectural characteristics and the ratio of self-moving children in a care center were very different conditions. (2) The evacuation behavior patterns of children with a disability were as follows: hugging a child by a teacher with the arms, walking with hugging and holding the child by a teacher, moving a wheelchair with a helper, and drag-out a cerebral palsied child with a mat wrapping. (3) The speed of the evacuation was fast in the following order: drag-out with a mat wrapping a child with a disability, hugging the child with the arms, walking with hugging and holding child, and moving with a wheelchair. In the case of difficulties in the vertical evacuation, a temporal evacuation area was essential for children with disability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.296-303
• /
• 2020

This study examined the factors affecting the emergency nursing performance of nursing students during a simulation. The variables related to the simulation were the objective and subjective emergency nursing performance, critical thinking, program outcome, simulation satisfaction, simulation confidence, and simulation immersion. The participants were 92 senior students who provided informed consent with an explanation about attending the study. The general characteristics and simulation-related data were obtained from the students before and after the simulation. An assessor evaluated the objective emergency nursing performance during the simulation and program outcome through a report reviewed after the simulation. Data analysis was performed using the number, percentage, mean, standard deviation, X²-test, one-way ANOVA, Pearson correlation, and progressive regression through the SPSS/WIN 22.0 program. Emergency nursing performance by the assessor was negatively associated with the satisfaction of clinical practice (r=-.31, p=.005) and positively related to the subjective clinical performance (r=.23, p=.036). The affecting rate was just 12%, which was low for explaining the objective emergency nursing performance during the simulation. Further studies will be needed to explore other factors affecting the emergency nursing performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.585-593
• /
• 2020

Until now, 29 fire accidents have occurred; 22 of them were caused by the interconnection of renewable energy sources that occurred during the rest period after the lithium-ion battery had been fully charged regardless of the seasons. The fire accidents of ESS were attributed to thermal runaway due to the overcharging of a few cells with the phenomenon of self-energy balancing, which is unintentional current flow from cells with a high SOC to the low cells if the SOC condition of each cell connected in parallel is different. Therefore, this paper proposes a novel configuration and operation algorithm of the BMS to prevent the self-energy balancing of ESS and presents a hybrid SOC estimation algorithm. From the test results of the self-energy balancing phenomenon between aging and normal cells based on the proposed algorithm and BMS, it was confirmed the possibility of self-energy balancing, which is unintentional current flow from cells with a high SOC to cells with a low SOC. In addition, the proposed configuration of the BMS is useful and practical to improve the safety of lithium-ion batteries because the BMS can reliably disconnect a parallel connection of the cells if the self-energy balancing current becomes excessively high.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.419-427
• /
• 2020

In the case of large combined weapon systems, such as submarines, the application, and verification of methods of setting the reliability, availability, and maintainability (RAM) target values for conventional weapon systems are limited. Submarines are complex weapon systems with the characteristics of the diversity of operation mode summary and mission profiles (OMS/MP) as well as equipment complexity because they are composed of multiple weapon systems, such as sonar systems and armed systems. Therefore, this study analyzed the development cases of existing weapon systems, i.e., the RAM target value-setting cases, and derived the problems and limitations of the cases to present measures to improve the setting and verification of the ram target values of submarines. In addition, submarines operate around the world and have different operating and maintenance conditions. Therefore, a submarine's ram target values should be set and verified centering on the mission essential equipment and mission critical equipment, instead of all components that constitute weapon systems. This study examined a method to verify the required performance RAM target-value setting, considering the characteristics of submarines as well as the physical performance requirements for the systems and equipment of submarines that must be considered when implementing national defense acquisition projects for submarines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.399-406
• /
• 2020

The R.O.K Army has developed and operated TM to maintain the operation of weapons systems since its establishment. As more modern weapons systems were developed, the more efficient operation was limited by a large quantity. As a countermeasure, the DAPA has operated the IETM using the KAIS TOOL since 2003. However, 16 years later, they were shunned by operators for software instability and other reasons. Based on the results of an operational test and evaluation team of the Army headquarters, the analysis results of software instability, limited compatibility and integration, limited real-time updates, etc. were analyzed. It was confirmed that KAIS development tools were urgently needed. Therefore, in order to solve this current problem for the Army IETM, the first phase of this paper focused on improving the IETM by maintaining the application present, the second of the Army Electronic Technology manual, phase going to propose improvement plans for operational test and evaluation by lining 11 elements of comprehensive logistics support with an electronic technology code.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.335-341
• /
• 2020

This study examined the shear bond strength between the zirconia core and pressed lithium disilicate veneering ceramics. The Schmitz-Schulmeyer test method was used to investigate the core-veneer shear bond strength of industrially manufactured zirconia core ceramic (Zirtooth, HASS, Gangneung, Korea) and pressed veneer ceramic (IPS e.max Zirpress, Vita PM9, GC Initial IQ, HASS Rosetta SM) (N=40). Data were statistically analyzed using one-way ANOVA and Tukey's test (a=0.05). The fractured surfaces of the specimens were examined to determine the failure pattern using a digital microscope. The mean ± SD shear bond strength in MPa were 16.69±3.11, 14.21±3.63, 11.17±2.92, and 27.90±5.71 for IPS e.max Zirpress, VITA PM9, GC Initial IQ, and HASS Rosetta SM, respectively. The average shear bond strength was largest for HASS Rosetta SM, followed by IPS e.max Zirpress, Vita PM9, and GC Initial IQ(p<0.05). The digital microscopy examination of the fracture surface showed adhesive and cohesive failure in pressed lithium disilicate veneering ceramics. The use of lithium disilicate veneer ceramic produced a significantly higher shear bond strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.113-119
• /
• 2020

This study examined the effects of stepwise education for operation patient care according to nursing satisfaction on the critical thinking disposition and clinical performance. The participants were 192 junior students who signed a consent form with an explanation of the study. Data were obtained from the students on the first day of junior's first semester and the last day of junior's first and second semester. Data analysis was performed using the number, percentage, mean, standard deviation, Chi-square test, t-test, and repeated measure ANOVA through the SPSS/WIN 23.0 program. Results showed that nursing students with high nursing satisfaction had higher critical thinking disposition than those with lower nursing satisfaction (F=4.57, p=.012). There were no significant differences according to time (F=0.20, p=.821). The clinical performance was not significantly different according to nursing satisfaction (F=1.08, p=.343) and time (F=1.58, p=.210). This means that increasing nursing satisfaction would be a strategy for increasing the critical thinking disposition that was the core competency of nursing students.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1747-1754
• /
• 2013

We evaluate the impact of near work has on myopia and how they differ across generation. The study subjects were 201(83 males and 118 females) adults who live in Cheongju and Daejeon. Myopia was defined as more than or equal to (-)2.50D. The subjects were divided myopic and control group. The surveys and eye tests that are related to near work and refractive error were conducted and the relationship between the degree of myopia and near work was investigated. Then, the groups were divided into people in their 20s and 30s and the comparisons were made again. The survey results showed significant differences between myopic and control groups that depended on: hours spent in school and outdoor activities during high school period, degree of refractive error caused by level of exercises during the junior high school and high school years, refractive error based on the type of high schools, also hours spent in school and outdoor activities. When the same question was done on the group in their 20s and 30s, there was a different outcome in trends between the groups and refractive error depending on whether they exercised. The degree of near work is one of the environmental risk factors that affect myopia and must be considered when studying myopic progression. However, when discussing specific behavioral patterns in relations to myopia prevention, culture and visual environment of a given generation must also be considered.