• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.349-352
• /
• 2017

Since the early 2000s, many information security professionals have sought to measure the effectiveness of information security investments. Such efforts have devised a number of ways to calculate the return in ROSI (Return On Security Investment) including the Gordon & Loeb method for calculating cyber damage. However, due to the characteristics of information security structure, the lack of relate information sharing, and many qualitative factors are included, the damage calculation is inaccurate.. This study reviews related studies, analyzes the Gordon & Loeb method and the Shin-Jin method, which are considered to be the most efficient of the existing methods, and designs improved methods.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.743-754
• /
• 2014

In this present paper, we, for the first time, calculated $SO_2$ inflow from China to Korea peninsula based on OMI $SO_2$ products and HYSPLIT (Hybrid Single Particle Lagrangian Integrated Trajectory Model) backward trajectory calculations. The major factors used to estimate $SO_2$ flux are long range transported $SO_2$ concentration, transport speed of air mass, and thickness of transported air mass layer. The mean and maximum $SO_2$ fluxes are estimated to be 0.81 and $2.11g{\cdot}m^{-2}{\cdot}h^{-1}$, respectively based on OMI products while, those of $SO_2$ fluxes are 0.50 and $1.18g{\cdot}m^{-2}{\cdot}h^{-1}$ respectively using insitu data obtained at the surface. For most cases, larger $SO_2$ inflow values were found at the surface than those estimated for the air mass layer which extends from surface up to 1.5 km. However, increased transport speed of air mass leads to the enhanced $SO_2$ flux at the altitude up to 1.5 km at the receptor sites. Additionally, we calculate uncertainties of $SO_2$ flux using error propagation method.

• Journal of Korean Society of societal Security
• /
• v.2 no.3
• /
• pp.39-46
• /
• 2009

A small loop-loop multi-frequency electromagnetic(EM) induction method is a useful technique to map a resistivity distribution efficiently and non-destructively. However, for quantitative interpretation and depth sounding, the quality of measured data is crucial. In this paper, we propose a bias correction of measured data by using background noise measurements to obtain reliable data, and propose an evaluation technique of apparent that can provide a resistivity image easily. We have performed small loop-loop EM measurements to detect water saturation in a man-made test site. The application of our proposed techniques to the measured data was successful.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.209-218
• /
• 2012

Repeatability and reproducibility in solid weight and effective porosity measurements have been discussed using 8 core samples with different diameters, lengths, rock types, and effective porosities. Further, the effect of temperature on the effective porosity measurement has been discussed as well. Effective porosity of each sample has been measured 7 times with vacuum saturation method with vacuum pressure of 1 torr and vacuum time of 80 minutes. Firstly, effective porosity of each sample is measured one by one, so that it can provide a reference value. Then for reproducibility check, effective porosity measurements with vacuum saturation of 2, 4, and 8 samples simultaneously have been performed. And finally, repeated measurements for 3 times for each sample are made for repeatability check. Average deviation from the reference set in solid weight showed 0.00 $g/cm^3$, which means perfect repeatability and reproducibility. For effective porosity, average deviations are less than 0.07% and 0.05% in repeatability and reproducibility test sets, respectively, which are in good agreement too. Most of porosities measured in reproducibility test lies within the deviation range in repeatability test sets. Thus, simultaneous vacuum saturation of several samples has little impact on the effective porosity measurement when high vacuum pressure of 1 torr is used. Air temperature can cause errors on submerged weight read and even effective porosity, because it is closely related to the temperature, density, and buoyancy of water. Consequently, for accurate measurement of effective porosity in a laboratory, efforts for maintaining air or water temperature constant during the experiment, or a temperature correction from other information are needed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1148-1157
• /
• 2013

In a passive UHF RFID system, the impedance matching between tag antenna and chip as well as the protocol parameter settings in a reader plays important role in determination of the maximum read-range. Almost no paper, however, has dealt with the above issues in relation with the maximum read range. In this paper, two known methods (of using the value from data sheets and proprietary RFID tester) and our proposing method in chip impedance evaluation are compared in terms of maximum read range. The read range of tags whose antenna impedance is conjugate matched with the chip impedance obtained from the proposed method is improved maximum 73 % more than that of tags from the other methods.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.221-230
• /
• 2002

본 연구의 목적은 1992년부터 산업자원부에서 추진하고 있는 에너지절약기술개발사업의 2000년까지 상용화 과제에 대한 에너지절약효과 산정 및 사회적 비용산출이다. 기술 개발에 의한 에너지 절약효과는 개발된 제품의 사용에 의한 직접적인 절약효과와 기술축적 및 타 산업으로의 기술파급 등에 의한 절약효과 등 간접적인 효과로 나누어 볼 수 있겠으나 본 연구에서는 분석자료 및 시간적인 제약으로 인하여 이 중 개발품의 사용에 의한 직접적인 효과에 한정하여 에너지 절약효과를 측정하였다.(중략)

• Proceedings of the Korean Statistical Society Conference
• /
• 2004.11a
• /
• pp.29-34
• /
• 2004

계속 반복하여 실시되는 통계조사에서 조사원은 오차를 발생시키는 주요 요인으로 간주되고 있다 조사원에 의한 오차를 측정하는 방법으로서 조사표 형태별로 조사원, 집락 및 가구 등 변수에 따라 할당하고 선계방법에 따른 추정 값에 대한 효과 및 효과의 분산을 산출하는 모델을 제시한다. 또한 실제 조사모델로부터 품질관리표본을 추출하여 이를 대상으로 리인터뷰를 실시한 결과를 조사원의 인구통계학적 특성별로 분석하고 불일치지수 등을 산출함으로써 오차를 분석하는 방법을 제시한다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.349-350
• /
• 2000

대기안정도와 혼합층고도는 보통 대기의 난류 상태를 정의하거나 대기의 확산 정도를 묘사하는데 사용하는 중요한 파라미터로써 대기오염 확산모델 연구에 많이 이용되고 있다. 현재 많은 Gaussian 대기오염 확산모델에 대부분 Pasquill 안정도 계급 또는 fumer 안정도 계급을 이용하여 오염물질의 수평확산폭($\sigma$y)와 수직확산폭($\sigma$z)을 계산하고 있다 그러나 이러한 대기안정도 산출방법은 실제의 대기안정도와 많은 차이를 나타낼 수 있으므로 이를 개선할 필요성이 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.203-205
• /
• 2000

본 연구의 목적은 우리 나라의 환경기초시설 중 하·폐수처리시설에서 발생하는 온실가스 배출량(inventory)을 산출하는 것이다. 이를 위하여 IPCC에서 제안하고 있는 지침을 중심으로 온실가스 배출량 산출방법을 검토하고, 우리 나라의 특성을 반영할 수 있도록 관련변수를 조사하였다. 또한 관련 변수의 적합성을 판단하고 기초 자료를 확보하기 위하여 일부 관련 시설에 대한 배출농도 측정을 실시하였다. (중략)

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.183-187
• /
• 1991

현재의 국제전화망의 상태 및 성능을 파악하기 위해서 교환기의 과금정보를 이용하여 국제망관리자료를 산출하는 방법 및 그 결과를 논하였다. 교환기에서 측정되는 망관리자료를 수집하는데는 시간이 많이 걸리며, 또 다양한 자료를 얻을 수 없기 때문에 망의 상태를 파악하기가 어렵다. 과금정보로부터 망관리자료를 추출한 결과, 통화량이 많아 중요하게 여겨지는 루트 및 착신지의 소통상황을 실시간으로 파악할 수가 있었으며, 문제가 되는 구간의 복구를 빨리 할 수 있는 상세한 자료를 얻을 수 있었다.