• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.6-6
• /
• 2018

본 연구에서는 고문헌에 기록된 도금 재료와 도금법 등을 확인하고 이를 기초자료로 활용하여 매실산을 사용한 금(Au)-수은(Hg) 아말감기법으로 고대 도금(鍍金)기술을 되살리고, 이를 토대로 경주 월지에서 출토된 금동삼존판불을 복원하였다. 먼저, 전통 도금법을 되살리기 위해서, "오주서종박물고변", "확지신편", 조선시대 각종 의궤 등에 공통적으로 기록되어 있는 매실에 주목하고, 매실을 3~4개월 발효 숙성 후 착즙한 뒤 그것을 농축하여 만든 매실산을 도금 실험에 적용하였다. 금아말감 도금을 위하여 월지 출토 금동삼존판불의 바탕소지금속인 청동삼존판불을 구리와 주석 89:11(Cu:6kg, Su:750g)로 합금하여 주물사 주조법으로 복원하였으며, 동일한 합금비로 제작된 $2.3cm{\times}3.5cm$(가로${\times}$세로)의 시편에 사전 실험을 실시하였다. 현대적 산처리 방식에 사용되는 질산과 전통방식으로 사용되는 매실산으로 시편에 산처리 한 후 각각 비교해 보고, 금분과 금박, 상온과 가온에 따른 아말감상태를 비교하는 실험을 진행하였는데, 실험에 사용된 매실산 70%는 pH가 1.94로, 오늘날 산처리에 사용하고 있는 질산 20%와는 차이가 있지만, 청동 시편 실험을 통해 매실산에 20분 정도 담근 뒤 금아말감을 도포 후 24시간 지나 가열($380{\sim}400^{\circ}C$) 했을 때 금도금이 잘 되어, 현대적 방법인 질산처리로 도금을 한 시편과 큰 차이가 없는 것으로 관찰되었다. 사전 실험을 통한 결과를 적용한 월지 출토 금동삼존판불 복원은 청동삼존판불 표면처리, 금-수은 합금 및 도금하기, 도금 후 표면처리의 순서로 진행되었는데, 금과 소지금속의 밀착력을 높이기 위해 표면을 숯을 이용해 탈지한 후 물로 씻어내고 매실산을 도포하여 20분 동안 두어 부식 및 세척을 시행하였다. 금도금을 위한 금-수은아말감은 가온할 때 수은이 증발하는 양을 고려하여 금1 : 수은10 비율로 합금하여 완성하였으며, 금아말감 도포 후 약 24시간 지난 다음, $380{\sim}400^{\circ}C$에 가열하여 수은을 기화시켜 도금작업을 완성하였다. 금아말감도금은 평균적으로 6~7차례 시행하여야 완벽히 도금되지만, 본 연구에서는 단 4차례의 도금만으로 금아말감도금을 완성시켰는데, 이것은 금아말감을 바탕소지인 청동에 도포한 후 24시간 동안 금아말감과 청동과의 반응 시간을 두게한 것이 큰 역할을 한 것으로 보이며, 이는 청동시편을 이용한 실험과 과학적 분석을 통하여 입증하였다. SEM으로 표면을 관찰한 결과 아말감 도포시간이 즉시인 경우 도금이 거의 되지 않은 것을 확인할 수 있었고 36시간이 넘어갈 경우 금 도금층이 불균일하게 관찰되었으므로 도금시간은 12시간~24시간 이내가 적절함을 확인할 수 있었다. EDS로 성분을 분석한 결과 산처리 시간이 20분인 시료의 경우 5 wt% 내외로 수은의 비율이 다른 시료에 비해 낮은 것을 확인할 수 있었다. 실험 및 분석결과 산처리 시간이 20분이고 아말감 도포시간이 24시간일 때 도금이 잘 이루어지므로 이 결과를 토대로 금동삼존판불을 복원하였다. 이번 연구를 통해 도금법에 표면을 세척하고 부식시키기 위해 사용한 물질이 매실산임을 찾아내어 확인할 수 있었는데, 이러한 점 에서 이 연구의 가장 큰 의미는 전통 소재와 기술을 복원한 것으로, 앞으로 매실산을 이용한 금 도금기술은 관련 학계에도 큰 기여를 할 것으로 기대된다.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.241-249
• /
• 2000

In this paper, ozonation of humic acid in water was characterized using $UV_{254}$ absorbance, TOC, Ultra Filtration and $^{13}C-NMR$. Also, carbonyl compounds in ozonated water were analyzed by GC/MS using PFBOA method. Ozonation by-products of water containing humic acid were determined as formaldehyde, acetaldehyde, acetone, glyoxal and methylglyoxal. Results of $UV_{254}$ absorbance and TOC with ozonation time at humic acid 20, 100ppm represent that decrease rate of 80% within ozonation time is 20 min and TOC removal rate of 40-50% within ozonation time is 30 min. Results for $^{13}C-NMR$ and Ultra Filtration, humic acid of high molecular weight by ozonation are oxidated and decomposed so that it was conversed low molecular weight such as aldehydes, carboxylic acid.

• Journal of Mushroom
• /
• v.10 no.4
• /
• pp.244-248
• /
• 2012

This study was conducted to suggest effective storage methods for the use spent mushroom (Flammulina velutipes) substrates (SMS) as animal feed. SMS was storage by deep stacking, composting and vinyl mulching after treated with 1% microbes and 0.5% formic acid. During the storage periods, all of the treatment was covered with hyphae of mushroom. The external change of SMS was shown that the storage of SMS can be improved by anaerobic condition and 1% microbial treatment. The comparatively high temperature, pH and total bacterial number was shown in the SMS treated without microbes and formic acid by composting.

• Korean Journal of Human Ecology
• /
• v.1 no.1
• /
• pp.103-112
• /
• 1998

Cotton fabric was treated with chitosan by pad-dry(-cure) method to impart antimicrobial properties. Four chitosans of different degree of deacetylation (DAC: 65~95%) with similar molecular weight(MW: ca. 50, 000) and one chitosan oligomer(MW 1, 800, DAC 86%) were used. In order to improve the durability to laundering of antimicrobial activity for the fabrics treated with chitosan oligomer, crosslinker or binder was included in the finishing formulation. Antimicrobial activity against Staphylococcus aureus and Proteus vulgaris was evaluated by the Shake Flask Method. The treated fabrics were laundered up to 20 times according to AATCC Test Method 60-1986 or JIS 0217-104 and antimicrobial activity of the laundered fabrics was evaluated. The antimicrobial activity was increased with the increase of concentration and degree of deacetylation of chitosan. And the cured fabrics showed better durability to laundering than the not-cured fabrics according to AATCC Test Method 60-1986. Crosslinker and binder decreased antimicrobial according of the fabrics treated with chitosan oligomer and were not effective to improve the durability to laundering according to JIS 0217-104. (Korean J Human Ecology 1(1) : 103~112, 1998)

• 한국지구물리탐사학회:학술대회논문집
• /
• 2001.09a
• /
• pp.75-89
• /
• 2001

There are 334 coal mines and about 900 metal mines abandoned. The environmental problems such as acid mine drainage from adits etc. and the subsidence has occurred in the abandoned mines. In addition, soil has been contaminated by tailings. According to analysis of mine drainages, some of them from adits in the abandoned coal and metallic mines were acidic and polluted by heavy metals. Especially, water quality of coal mine drainages were different by areas. Treatment of mine drainage by conventional chemical treatment has the drawback because the operating cost is very expensive. The treatment system used in mine drainage is the natural treatment system such as anoxic limestone drain in adits and the constructed wetland. The method of reclamation for abandoned waste rocks and tailings impoundments are mainly landfilling.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.145-151
• /
• 2005

Color enhancement of African rubies with dark red was carried out by the heat treatment and the hydrothermal treatment method respectively. The heat treatment method brought about an adverse effect causing the color to be deteriorated. However, the hydrothermal treatment method enhanced its color and clarity. The hydrothermal treatment conditions for color enhancement of them were as follows: solvent: 0.9M $Na_2CO_3-1M\;K_2CO_3$, temperature: $450^{\circ}C$, duration: 48 hrs, filling: $30\%$, pressure: 375 atm. As the results of characteristics for African rubies obtained under these conditions, it was known that the amount of $Cr^{3+},\;Fe^{3+},\;Ti^{4+}$ was reduced after the hydrothermal treatment from the ICP/MS and XRF analyses. Also, it was found that the red color from the colorimeter analyses was getting lighter. These results were consistent with the PL analysis showing that the intensity of the luminescence peak generated by the electron transition of $Cr^{3+}$ ion became lower after the hydrothermal treatment compared with the non-treated rubies.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.278-283
• /
• 2005

Cement and paraffin waste form were prepared with a acid extraction method for the analysis of radionuclides generated from nuclear power plants. The acid extraction method was carried out with $HNO_3-HCl$ acid. At first, we compared the method with the microwave acid digestion method using SRM. The solutions of decomposed SRM were then analyzed by AAS and ICP-AES. The acid extraction method had shown good results as microwave acid digestion method. This method provided recovery values greater than $80\%$ for metallic elements.

• Communications for Statistical Applications and Methods
• /
• v.2 no.2
• /
• pp.404-413
• /
• 1995

2수준계 요인실험법에서 Kim(1992) 에 의해 균형배열을 이용하여 설계된 resolution V 포화균형부분실시법에서 추정량들의 공분산행렬을 계산하여 통계적 특성을 연구하였다. 이러한 부분실시법은 최소의 처리조합수를 가지고 주효과와 2인자 교호작용까지 분석할 수 있는 특징이 있다. 특히 본 논문에서는 인자의 수에 따라 설계가능한 8개의 부분실시법들간의 유사성과 통계적 효율성, 그리고 index number들의 변화에 따른 공분산행렬의 특성을 살펴보았다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.6
• /
• pp.240-243
• /
• 2006

The significant color enhancement in low quality Australian natural sapphire has been achieved by a hydrothermal method. The optimal conditions for the color enhancement of Australian natural sapphire were as follows; hydrothermal reaction temperature: $320{\sim}350^{\circ}C$, duration : 3 days, hydrothermal solvent: 2 M NaOH solution. After the hydrothermal treatment, Australian natural sapphires of transparent colors were obtained, and their grades were found to be improved from commercial to middle/top grade by value chart analysis.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.1
• /
• pp.52-62
• /
• 2015

Coagulating effects of eco-friendly coagulant materials such as zeolite, kaolinite, loess and chitosan upon sewage sludge were evaluated. And coagulating effects of the mixtures of those materials and polymer (polyacrylamide) were also investigated. Coagulating efficiency of loess was higher than that of kaolinite and zeolite at the treatment levels of 2,500~50,000mg/L. Coagulating efficiencies of zeolite, kaolinite and loess at the treatment level of 20,000mg/L were lower than that of 1,000 mg/L of polymer, which meant that single application of those materials in real plant were not feasible. At the treatment level of 1,000 mg/L, coagulating efficiency of Chitosan was much lower than that of polymer, which also meant that single use of chitosan in real plant could be unrealistic because of its high price. However, the application of the mixture of 'polymer 80mg/L + kaolinite or loess 500 mg/L + chitosn 10mg/L' or the mixture of 'polymer 80mg/L + kaolinite or loess 500mg/L' was promising way for coagulating sewage sludge.