• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.466-477
• /
• 2018

Orthopaedics is an area where 3-dimensional (3D) printing technology is most likely to be utilized because it has been used to treat a range of diseases of the whole body. For arthritis, spinal diseases, trauma, deformities, and tumors, 3D printing can be used in the form of anatomical models, surgical guides, metal implants, bio-ceramic body reconstruction, and orthosis. In particular, in orthopaedic oncology, patients have a wide variety of tumor locations, but limited options for the limb salvage surgery have resulted in many complications. Currently, 3D printing personalized implants can be fabricated easily in a short time, and it is anticipated that all bone tumors in various surgical sites will be reconstructed properly. An improvement of 3D printing technology in the healthcare field requires close cooperation with many professionals in the design, printing, and validation processes. The government, which has determined that it can promote the development of 3D printing-related industries in other fields by leading the use of 3D printing in the medical field, is also actively supporting with an emphasis on promotion rather than regulation. In this review, the experience of using 3D printing technology for bone tumor surgery was shared, expecting orthopaedic surgeons to lead 3D printing in the medical field.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.909-917
• /
• 2018

3D printing technology is expected to be an innovative technology of the manufacturing industry during the 4th industrial revolution, and it is being used in various fields including biotechnology and medical field. In this study, we verified the printing materials through Monte Carlo simulation to evaluate the radiation shielding ability of the raw material using this 3D printing technology. In this paper, the printing materials were selected from the raw materials available in a general-purpose FDM-based 3D printer. Simulation of the ICRU phantom and the shielding system was carried out to evaluate the shielding effect by evaluating the particle fluence according to the type and energy of radiation. As a result, the shielding effect tended to decrease gradually with increasing energy in the case of photon beam, and the shielding effect of TPU, PLA, PVA, Nylon and ABS gradually decreased in order of materials. In the case of the neutron beam, the neutron intensity increases at a low thickness of 5 ~ 10 mm. However, the effective shielding effect is shown above a certain thickness. The shielding effect of printing material is gradually increased in the order of Nylon, PVA, ABS, PLA and TPU Respectively.

• The Korean Journal of Archival Studies
• /
• no.55
• /
• pp.275-305
• /
• 2018

The advent of e-government following the information revolution has affected public records systems. Records management should now be changed into an environment for establishing a national records management system based on the Internet of things (IoT), cloud, big data, and mobile (ICBM), and it is time to make a fresh start toward a next-generation records management system that responds to changes in the environment. Ultimately, it is time for a records management system that ensures a proper way of dealing with new environmental changes. It has been nearly 20 years since the Public Records Management Act was enacted in 1999, and its complete amendment was made in 2006 so that electronic records could be efficiently managed. When recompliance management needs to be rechecked, a full redesign is required to enable the current legal system to respond to the new circumstances in the present day. Therefore, this study is intended to suggest ways to improve the new records management legal system as the environment changes over the next generation and lay the legal groundwork for innovation in the national records management system.

• Journal of the Korean Society for information Management
• /
• v.35 no.4
• /
• pp.37-50
• /
• 2018

The purpose of this study is to analyze the first edition of Brown's Subject Classification and to understand the implications of today's library classification. For this purpose, the first edition of the Subject Classification published in 1906 was analyzed. The analysis results are divided into three main areas. First, SC is divided into eleven main classes and each class is subdivided into enumerated subdivisions from 000 to 999. Second, As a method of synthesizing the classification numbers, there were three methods of synthesis. There was a flexibility to insert a new classification number at the appropriate location when a new topic that does not appear in the main table appeared. Implications for classification studies can be divided into four main categories. First, SC proposed a method of classification number synthesis for composite topics, which is an innovative method that was not available in previous library classification. Second, the subject matter was explained in various aspects through the operation of auxiliary tables supporting the facets. Third, it is possible to easily insert a new topic into the classification system by using the SC that can have a flexible classification system for each library, or to use a short classification number according to the size of the library collection. Fourth, it provided a directory that can be considered as access points for digital materials.

• Journal of Technology Innovation
• /
• v.27 no.2
• /
• pp.99-122
• /
• 2019

ODA (Official Development Assistance) aims for practicing international humanitarianism in developing countries. However, ODA donors also seek to find convincing evidence meeting the national economic & political interests in the international community. In this regards, precise & unbiased estimation of the policy effects of ODA aid on the donors' exports to the recipient countries has recently become one of the primary concerns of the ODA donors, especially developing countries including Korea of which economy structure heavily relies on exports for economic growth. Based on the basic gravity model, this study empirically analyzes the effects of technical cooperation ODA delivering skills, knowledge and technical know-how on Korea's exports to the ODA recipient countries using 10-year panel data from 2007 to 2016. Specifically, by incorporating major variables affecting trade such as GDP, distance, FDI etc, the effect of technical cooperation ODA on Korea's exports to the ODA recipient countries is estimated with various kinds of panel models. As a result, technical cooperation ODA has a statistically significant impact on Korea's exports to ODA recipient countries, especially in the exports of intermediate goods. And the detail process of this black-boxed mechanism is scrutinized through case studies on Uzbekistan, The Philippines, and Morocco.

• Journal of Practical Engineering Education
• /
• v.11 no.1
• /
• pp.75-86
• /
• 2019

Globally, the change in higher education is gradually moving toward a trend that seeks a change in innovative higher education through the revitalization of digital-based education. Accordingly, this study designed a customized education model based on e-learning that can be used in undergraduate education and development of lifelong vocational skills. The use of online learning platforms and the expansion of education are major factors that change the overall higher education system as the form and content of curriculum changes around the world. In order to establish a customized education model using online learning platform, this study analyzed major overseas advanced education cases and selected the basic direction of customized learning as personalized learning, competency based learning, and training for talents leading the 4th Industrial Revolution. Then, FGI was conducted for undergraduate and lifelong vocational ability development experts. As a result, a customized education model using an online learning platform was derived from a degree-type model available in undergraduate education and a non-degree-type model available in the field of lifelong vocational ability development, and each operation strategy was suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.630-637
• /
• 2019

The scientific, economical and industrial values of the Moon have been increased, as massive ice-water and rare resource were founded from the lunar exploration missions. Korea and other major space agencies in the world are competitively developing the ISRU (In Situ Resource Utilization) technology to secure future lunar resource as well as to construct the lunar base. To prepare for the lunar construction, it is essential to develop the rover based construction spatial information technology to provide a decision-making aided information during the lunar construction process. Thus, this research presented the construction spatial information technology based upon rover's camera system. Specifically, the conceptual design of rover based camera system was designed for acquisition of a rover's navigation image, and lunar terrain and construction images around the rover. The reference architecture of the rover operation system was designed for computation of the lunar construction spatial information. Also, rover's localization and terrain reconstruction methods were introduced considering the characteristics of lunar surface environments. It is necessary to test and validate the conceptual design of the construction spatial information technology. Thus, in the future study, the developed rover and rover operation system will be applied to the lunar terrestrial analogue site for further improvements.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.553-561
• /
• 2019

In this study, the method of quality measurement for the statistical usefulness of de-identified data was examined in terms of prediction accuracy by statistical modeling. In the era of the 4th industrial revolution, effective use of big data is essential to innovation through information and communication technology, but personal information issues are constrained to actively utilize big data. In order to solve this problem, de-identification guidelines have been established and the possibility of actual re-identification of personal information has become very low due to the utilization of various de-identification methods. On the other hand, strong de-identification can have side effects that degrade the usefulness of the data. We have studied the quality of statistical usefulness of the de-identified data by KLT model which is a representative de-identification method, A case study was conducted to see how statistical accuracy of prediction is degraded by de-identification. We also proposed a new measure of data usefulness of the de-identified data by quantifying how much data is added to the de-identified data to restore the accuracy of the predictive model.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.843-862
• /
• 2018

Purpose: The purpose of this study was to develop quality innovation techniques specialized for the small and medium-sized businesses. which account for the majority of Korean companies, were having a hard time utilizing the widely recognized quality innovation techniques due to resource constraints. Methods: First, we do review the existing Single PPM and 6 Sigma. And investigate the utilization of these methods including Toyota Production System. Second, we devised a four-step problem-solving methodology based on recent trends in quality innovation such as Simple, Speedy, and Smart. Third, we do survey on frequently used tools for quality innovation. Many opinion leaders including quality consultants and professors answered and gave us valuable comments about our selected quality tools. Finally, we do specify and map tools to each step of PASS. Results: In 2017, 167 companies participated in the quality innovation support business for small businesses according to the Korea Chamber of Commerce & Industry. We conducted performance checks on 167 companies that had completed the "PASS" projects. For the purpose of evaluating improvement performance, the survey was carried out using a structured questionnaire during the field visit of these companies mentioned above. For the reference, 165 out of 167 companies (98.8 % response rate) responded to the questionnaire and conducted performance analysis based on it. According to the survey, 97.6 percent of the respondents were very satisfied with their overall satisfaction with the quality innovation support projects for small and medium sized enterprises in 2017. Also, 93.3 % of the respondents were satisfied with the results of level of the target achievement. As a result, 160 companies (97.0 % of the participating companies) hope to partic ipate in the quality improvement project using "PASS" once again. Conclusion: In this paper, we introduce the new quality innovation methodology, which is named as 'PASS', It could support the long-range business plan of the small and medium-sized businesses to achieve total customer satisfaction resulting in increased market share and improved profit margin. The most small companies can use this "PASS" technique more easily, quickly and most efficiently than their existing known quality innovation techniques such as Six Sigma and Single PPM, etc.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.265-277
• /
• 2019

The objective of this study was to develop and verify an effective vortex typed nonfilter nonpoint source pollution reduction device. To verify this pollution reduction device, a total of twelves scenarios (three rainfall intensities${\times}$two states${\times}$two steps) of experiments were conducted using pollutants. First, simulated inflow (rainfall intensity 2.5 mm/hr: $0.00152m^3/s$, rainfall intensity 3.395 mm/hr: $0.00206m^3/s$, rainfall intensity 6.870 mm/hr: $0.00326m^3/s$) was calculated. Second, pollutants (mixture of 25% of four particle sizes) were selected and injected. Third, pollutant removal efficiencies of this device at its initial state and operating states were measured. As a result of analysis based on rainfall intensity, the concentration of pollutants was decreased by the device at initial and operating states at all rainfall intensities. Its pollutant removal efficiency was more than 80%, the standard set by the Ministry of Environment. Its pollutant removal efficiency was gradually increased over time, reaching approximately 90%. Its pollutant removal efficiency was higher in its operating state than that in its initial state. Therefore, nonpoint source pollutants can be effectively removed by this vortex typed nonpoint source pollution reduction device developed in this study.