• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.81-93
• /
• 2022

There are many natural hot springs and mineral springs as well as the cultural heritage of the three kingdoms period in the Geum River basin including Chungcheong region. No specific regeneration and publicity plans for deteriorated facilities in this area has been presented. This study aims to suggest promising hot spots and complex water culture belt in the Chungcheong region and Geum River basin through the spatial interpretation of resources. The northern part of the Geum River basin is expected to become a therapeutic spring belt with many hot springs and CO₂-rich springs. In the central and southern parts of the Geum River basin, it is considered that it will be possible to promote convergence publicity by using groundwater resources and cultural assets.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.51-59
• /
• 2023

The Nakdong river is both a natural resource crucial to underwater ecosystems and a water source for its basin's residents. Industrial wastewater and domestic sewage must meet the relevant standards for discharged water before they can flow into the river. The correlation between old and new measures of organic matter was examined using water quality data from 50 monitoring locations in the main stream of the Nakdong river. The coefficient of determination (R²) for total organic carbon (TOC), the new measure of organic matter, and chemical oxygen demand (COD), the old measure of organic matter, in the main stream of the Nakdong river was 0.6134, indicating high correlation. Water quality at each location assessed using TOC and COD showed disparities that cannot be ignored: quality appeared higher when evaluating the main stream of the Nakdong river using TOC instead of COD. Therefore, there remains a need to review water quality ratings based on TOC; continuous monitoring of COD is also required. In addition, the cause of the difference should be clearly identified to help assess artificial sources of pollution and natural factors affecting organic matter. Water management of the Nakdong river will then be possible using the water quality rating.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.39-49
• /
• 2023

Soil contaminants measured and managed in Korea include those of geologic origin such as arsenic, cadmium, copper, lead, zinc, nickel, mercury, and fluoride. This study identifies the distribution of these contaminants using GIS modeling to analyze the spatial probability of soil contamination originating from geology. The modeling found that cadmium, copper, lead, nickel, and mercury often exceed the regulated standard by <1%. Concentrations of arsenic and zinc greatly exceeded the standard in the vicinity of mines and industrial complexes: mining and industry seemed to have substantial effects on the concentrations of these metals. Although fluoride was sampled at the lowest number of points, its frequency of exceeding the standard was the highest. No obvious source of artificial contamination has been identified, and fluoride's distribution characteristics showed continuity over a wide area, suggesting a strong correlation between geological characteristics and fluoride concentration. The highest frequencies of fluoride exceeding the standard were in Jurassic granite (40.00%) and Precambrian banded gneiss (34.12%). As these rocks contributed to the formation of soil through their weathering, high fluoride concentrations can be expected in soil in areas where these rocks are distributed.

• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.1-8
• /
• 2023

Modeling of artificial targets in Synthetic Aperture radar (SAR) mainly simulates radar signals reflected from the faces and edges of the 3D Computer Aided Design (CAD) model with a ray-tracing method, and modeling of the clutter on the Earth's surface uses a method of distinguishing types with similar distribution characteristics through statistical analysis of the SAR image itself. In this paper, man-made targets on the surface and background clutter on the terrain are integrated and made into a three-dimensional (3D) point cloud scatterer model, and SAR image were created through computational signal processing. The results of the SAR Stripmap image generation of the actual automobile based SAR radar system and the results analyzed using EM modeling or statistical distribution models are compared with this 3D point cloud scatterer model. The modeling target is selected as an bridge because it has the characteristic of having both water surface and ground terrain around the bridge and is also a target of great interest in both military and civilian use.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.11-19
• /
• 2006

For the last decade, the hi-directional testing method has been advantageous over the conventional pile load testing method in many aspects. However, because the hi-directional test uses a loading mechanism entirely different from that of the conventional pile load testing method, many investigators and practicing engineers have been concerned that the hi-directional test would give inaccurate results, especially about the pile head settlement behavior. Therefore, a hi-directional load test and the conventional top-down load test were executed on 1.5 m diameter cast-in-situ concrete piles at the same time and site. Strain gauges were placed on the piles. The two tests gave similar load transfer curves at various depth of piles. However, the top-down equivalent curve constructed from the hi-directional load test results predicted the pile head settlement under the pile design load to be about one half of that predicted by the conventional top-down load test. To improve the prediction accuracy of the top-down equivalent curve, a simple method that accounts for the pile compression is proposed. It was also shown that the strain gauge measurement data from the hi-directional load test could reproduce almost the same top-down curve.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.353-362
• /
• 2023

In this research, the usage status and characteristics of user big data of Mobike, a dockless bike sharing service introduced in Suwon city, were analyzed, and multiple regression analysis was performed to identify factors influencing the demand for dockless bike sharing service. For analysis, usage data of bike sharing system in Suwon city in 2019 were obtained, and they were organized by areas. As a result of analyzing the characteristics of the influencing factors selected for each area, it was found that the extension of bicycle roads shows high in areas with high demand for bicycles or adjacent areas. Also, the population of 10-30's shows high in areas with high demand for bicycles or adjacent areas. In addition, it was analyzed that the use of bike sharing system is high in areas with high maintenance rate of bicycle roads and large-scale residential and commercial facilities near residential districts and adjacent areas. As a result of the multiple regression analysis, it is analyzed that length of bicycle·pedestrian roads (non-separated), population of 10-30's, number of railway stations, number of schools, number of commercial facilities, number of industrial facilities factors were significant. It is expected that it may be possible to create an environment in which citizens want to use dockless bike sharing service by identifying factors affecting the number of stationless shared bicycles. Also, the results of data analysis are considered to be contributing to policy data to promote the use of dockless bike sharing.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.229-238
• /
• 2023

Bentonite is a type of rock that has been used as a traditional mineral medicine. It has a variety of pharmacological activities, and is used in traditional Korean medicine to treat jaundice, diarrhea, and hemostasis. In modern medicine, it is used as a raw material and additive for medicines such as antacids, gastrointestinal protective agents, and laxatives. Bentonite produced in Korea was produced through diagenesis or hydrothermal alteration of tertiary volcanic debris distributed in the Pohang and Gyeongju areas. It is mainly used for industrial purposes such as papermaking, paint, civil engineering, casting, and animal feed. Recently, technology is being developed to use it in cosmetics and pharmaceuticals. In this study, the geochemical characteristics of bentonite were identified by analyzing the main components and trace elements of 40 and 21 types of bentonite produced in the Gampo Gyeongju and Yeonil Pohang area. Also it were classifed by formation envrionment of bentonite deposits in the Gampo and Yeonil. As a result of the study, bentonite from the reserch area may be cased by argillic alteraton that alkali elements are removed form basaltic rocks by hydrothermal fluids and AI-CCPI alteration indices wrere also indentified argillic alteraton. It was found that there is a correlation between the behavior characteristics of heavy metal elements (P b, Cr, As) and the hydrothermal alteration of bentonite in the reserch area.

• Journal of Life Science
• /
• v.33 no.7
• /
• pp.593-604
• /
• 2023

The ocean accounts for over 70% of the Earth's surface and is a space of largely unexplored unknowns and opportunities. Korea is a peninsula surrounded by the sea on three sides, emphasizing the importance of marine research. The ocean has an extremely complex environment with immense biological diversity. In terms of microbiology, the marine environment has varying factors like extreme temperature, pressure, solar radiation, salt concentration, and pH, providing ecologically unique habitats. Due to this variety, marine organisms have very different phylogenetic classifications compared with terrestrial organisms. Although various microorganisms inhabit the ocean, studies on the diversity, isolation, and cultivation of marine microorganisms and the secondary metabolites they produce are still insufficient. Research on bioactive substances from marine microorganisms, which were rarely studied until the 1990s, has accelerated in terms of natural products from marine Actinomycetes since the 2000s. Since then, industries for bioplastic and biofuel production, carbon dioxide capture, probiotics, and pharmaceutical discovery and development of antibacterial, anticancer, antioxidant, and anti-inflammatory drugs using bacteria, archaea, and algae have significantly grown. In this review, we introduce current research findings and the latest trends in life science and biotechnology using marine microorganisms. Through this article, we hope to create consumer awareness of the importance of basic and applied research in various natural product-related discovery fields other than conventional pharmaceutical drug discovery. The article aims to suggest pathways that may boost research on the optimization and application of future marine-derived materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.741-747
• /
• 2008

Nowadays, the accuracy of the geoid model has been improved through development of the combination model which was composed of traditional gravimetric geoid and geometric geoid by the GPS/leveling data in USA and Japan. It is a state of the art method in geoid modeling field that what so called hybrid geoid. In this paper, as a basic study to develop Korean hybrid geoid model, we studied gravimetric geoid solutions using three gravity reduction methods (Helmert's condensation method, RTM method and Airy-isostatic method) and evaluated the usefulness of each method in context of precise geoid. The gravimetric geoid model were determined by restoring the gravity anomalies (included TC) and the indirect effects were made from various reduction methods on the EIGEN-CG03C reference field. The results are compared with respect to the geometric geoid undulation determined from 498 GPS/leveling after LSC fitting. The results showed that hybrid geoid with RTM (Residual terrain model) reduction method was most accurate method and the value of the difference compared to geometric geoid was $0.001{\pm}0.053m$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.709-716
• /
• 2006

The rapid changes of family structure such as singles, working couples and so on have effects on a travel behaviour. One of the characteristics from this is the increasing portion of trip-chain, in which plural activities were conducted in a "single outgoing" travel. Therefore travel must be considered as location change to conduct various activities instead of pursuing single travel purpose. This paper specifies a behavioral homogeneous person group by a job, a possession of cars. Based on this classification of person groups and their activity diary, the sequence, time and travel mode of activities in a day can be verified. As a case study household survey was conducted in city Kongju. The survey result shows that the classification of behavioral homogeneous person group based on criteria like employment status and car ownership bring a good result to forecast trip generation in traffic zone.