• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.173-179
• /
• 2002

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C50) fur robotic manipulators to achieve trajectory tracking angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide motion for robotic manipulators. In the proposed scheme, adaptation laws are derived from the improved second stability analysis based on the indirect adaptive control theory. The proposed control scheme is simple in structure, fast in computation, an suitable fur implementation of real-time control. Moreover, this scheme does not require an accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the adaptive controller is illustrated by experimental results for a SCARA robot.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.108-115
• /
• 1999

This paper proposes the robot inverse calibration method using a neural networks. A highorder networks called Pi-Sigma networks has been used. The Pi-Sigma networks uses linear summing units in the hidden layer and product unit in output layer. The inverse calibration model which compensates the difference of joint variables only between measuring value and analytic value about the desired pose(position orientation) of a robot is proposed. The compensated values are determined by using the weights obtained from the learning process of the neural networks previously. To prove the reasonableness the SCARA type direct drive robot(4-DOF) and anthropomorphic robot(6-DOF) are simulated. It shows that the proposed calibration method can reduce the errors of the joint variables from $\pm$3 to $\pm$0.1.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.76-82
• /
• 1999

During operating given working a robot manipulator makes some problems such as the accumulation of the error or the deviation from the command trajectory. These problems are mainly due to the disturbance noise or unmodeled system parameters. To solve these problems most of robot manipulators equip the controller. But if exact controller gains are not seleced we can't decrease the working efficiency(such as compensation about error or deviation) of the robot manipulator. So in this paper we present the controller gain tuning law by which we can find the controller gain which satisfies the per-formance specification of the robot manipulator during working of the robot. The proposed algorithm is derived from the Laypunov direct method. And by the simulation on the 4-axis SCARA type robot(SAMSUNG SM5 Robot) we guarantee the performance of this algorithm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.253-257
• /
• 2004

Neural networks are works are used in the framework of sensor based tracking control of robot manipulators. They learn by practice movements the relationship between PSD(an analog Position Sensitive Detector) sensor readings for target positions and the joint commands to reach them. Using this configuration, the system can track or follow a moving or stationary object in real time. Furthermore, an efficient neural network architecture has been developed for real time learning. This network uses multiple sets of simple back propagation networks one of which is selected according to which division(corresponding to a cluster of the self-organizing feature map) in data space the current input data belongs to. This lends itself to a very training and processing implementation required for real time control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.795-798
• /
• 1991

The hybrid positon/force control is required when two or more robots perform a coorperative task in a uncertain environment, or when single robot does a task with a constant force to the environment. In this paper, a new control algorithm which control simultaneously the position and the force are proposed, however, especially the conventional position controller employed in the present robot control is used. Moreover, in order to improve the output response characteristics of the system, the PI gains which were computed from the PI gain tunning techniques, are varied based on the results of the Fuzzy algorithm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.62-67
• /
• 1997

This paper reprdsents a new scheme of neural network control system analysis the robustues of robot manipulator using digital signal processors. Digtal signal processors, DSPs, are micro-processors that are particularly developed for fast numerical computations involving sums and products of variables. Digital version of most advanced control algorithms can be defined as sums and products of measured variables, thus it can be programmed and executed through DSPs. In additions, DSPs are a s fast in computation as most 32-bit micro-processors and yet at a fraction of their prices. These features make DSPs a viable computational tool in digital implementation of sophisticated controllers. Durng past decade it was proposed the well-established theorys for the adaptive control of linear systems, but there exists relatively little general theory for the adaptive control of nonlinear systems. The proposed neuro network control algorithm is one of learning a model based error back-propagation scheme using Lyapunov stability analysis method.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.393-399
• /
• 2003

산업의 발전과 더불어 농업인구는 해마다 감소하고 있으며 농업 연령층은 고령화 현상이 나타나고 있다. 전체 농가인구와 호당 농업인구가 줄어들고 있는데 반해 호당 경지면적은 매년 증가하고 있다. 노동력은 농업생산비의 가장 큰 비중을 차지하고 있고, 농가의 연령층 또한 고령화가 되어가고 있음을 고려해 본다면 농업의 기계화ㆍ자동화의 필요는 절대적이다. 수확은 재배 과정 가운데 노동력, 시간 및 비용이 가장 많이 소요되는 작업이다. 본 연구는 수확용 매니퓰레이터의 개발을 위한 기구학적 분석을 하는 것이다. 구체적인 연구 목적은 매니퓰레이터의 정방향 기구학 및 역방향 분석을 통해 방정식을 구한 후 장치를 작동시켜 반복오차를 측정한 후 이 값을 이론값과 비교하여 검증하도록 하였다. (중략)

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.117-121
• /
• 2001

This paper presents a new approach to the calibration of a SCARA robot orientation with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distortion causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is, the optical centers of lens elements are not strictly collinear. Thin prism distortion arises from imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.128-133
• /
• 2001

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C50) for robotic manipulators to achieve trajectory tracking angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide motion for robotic manipulators. In the proposed scheme, adaptation laws are derived from the improved second stability analysis based on the indirect adaptive control theory. The proposed control scheme is simple in structure, fast in computation, an suitable for implementation of real-time control. Moreover, this scheme does not require an accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the adaptive controller is illustrated by experimental results for a SCARA robot.

• TTA 저널
• /
• 통권138호
• /
• pp.24-29
• /
• 2011

인류가 전기를 발견한 것은 기원전 600년으로 알려져 있지만 널리 이용할 수 있게 된 것은 불과 200년 안팎이다. 이 짧은 기간에 인류는 과학적 차원을 넘어서 전기공학 뿐만 아니라 전기를 이용하는 전자공학, 통신공학, 제어공학, 컴퓨터공학 분야에서 비약적인 발전을 이끌었으며 지금은 우주선부터 나노 로봇까지 모든 과학, 공학, 생활 분야에서 전기 없는 발전을 기대할 수 없게 되었다. 작은 반도체 소자 내에서의 수 ${\mu}V$회로 구성부터 765kV의 고압 송전망까지 그 형태는 다양하지만, 전기는 전선을 통해 전달되며, 전기의 이용은 곧 전선 인프라의 구축을 의미하고 있다. 전기의 이용에 있어서 필연적인 전선의 남용은 그 도를 넘어서 가정, 직장뿐만 아니라 도로에서도 공해 수준으로 펼쳐져 있고, 이들은 천연 자원의 고갈을 촉진할 뿐만 아니라 잘못 관리되었을 때에는 전기적 쇼크, 화재 등 커다란 재난으로 다가서 기도한다. 무선전력공급 기술은 이러한 전선으로부터의 자유를 추구하는 것으로 소비자가 가장 원하는 기술의 하나이다. 이는 예약된 시장을 말하고 있는 것이며 산업체는 또 다른 산업 기회를 창출할 수 있는 기회를 맞고 있는 것이다. 호언컨대 5년 이내에 대부분의 휴대폰과 노트북 충전기는 무선방식으로 전환될 것으로 보인다. 이번 특집에서는 무선전력공급 기술, 시장, 표준화 동향을 살펴보고 그 응용 개발 및 정책 방향까지 다양한 제언들을 묶어 보았다.