• 산업기술연구
• /
• 제28권A호
• /
• pp.75-80
• /
• 2008

This paper describes the mechanical and control design of a robotic device for providing therapeutic assistance to arm movement following stroke. This is a new robot for arm therapy applicable to the training of activities of daily living in homes and clinics. This instrument has one degrees of freedom, and is equipped with position and force sensors. Repetitive movement can improve movement performance in patients with neurological or orthopaedic lesions. The application of robotics can serve to assist, enhance, evaluate, and document neurological and orthopaedic rehabilitation of movements. The new robot, the mechanical structure, the control circuit, the sensors and actuators and some safety aspects.

• 한국소음진동공학회논문집
• /
• 제13권11호
• /
• pp.838-844
• /
• 2003

The noise and vibration reduction schemes of an industrial robot are studied. Experimental procedures are employed to examine the sources of robot noise. A parametric study is undertaken to observe the effects of each part such as gear, shaft and housing on the sound pressure level. After the part which mainly effects on the noise is proved, we propose countermeasures for reducing the noise and vibration of the robot system.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.913-919
• /
• 2008

Dynamic characteristics of a wrist power transmission of an industrial robot are studied. The wrist power transmission has complex structure characteristics, because it is composed with several shafts and gear system. We used an analytical method to investigate the dynamic characteristics. An analytical model is a rigid model which is composed with masses and springs. Both bearing and gear contact model represent equivalent stiffness springs which are determined by the experiment. In order to investigate the dynamic tendency of the robot wrist power transmission, we simulate the analytical model. There is a dynamic analysis tool which is called the RecurDyn. To verify the analytic results, we experiment a signal analysis which is an overall noise level of the robot. By the parametric study of the element of the robot, we study an improvement method of dynamic characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.146-151
• /
• 2002

The object of this study is an examination of source of robot noise and reduction of the noise and the vibration for an industrial robot system. As the first step in our study, the noise and the vibration from the robot are measured by microphones and by accelerometers and the source of the noise and the vibration are proved to be from the gear, shaft, and housing from the experiments. The occurrence of the noise may be classified according into kinds, Finally base on the result of the experiments, we consider a countermeasure for reducing the noise and the vibration of robot system by the parametric study.

• 산업기술연구
• /
• 제22권B호
• /
• pp.251-260
• /
• 2002

In this thesis, a three degrees of freedom robot, which is able to provide sufficient precision for various robot researches, has been developed. The cable mechanism is used as a basic transmission of robot joints. Based on an optimal design strategy, link and joint parameters are determined and then overall geometry of the robot is designed. As an architecture of robot control, real time control system using real time linux and RtiC-Lab(Real Time Controls Laboratory) is developed. This system, written in C and based on Linux O/S, includes text editor, compiler, downloader, and real time plotter running in host computer for developing control purpose. Using these hardware and software, simple PD position control is implemented, the results shows the effectiveness of the system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.150-155
• /
• 2008

Dynamic characteristics of a wrist power transmission examine closely with mass property, to present a model which is able to induce the vibration is ultimately the purpose. A robot wrist power transmission for analysis model gets the mass property through the approach to be the experimental. A bearing equivalent stiffness which supports the axis and a gear contact equivalent stiffness are determined by the simplicity analysis model compared the result of the experiment. We calculate the vibration tendency of the robot wrist power transmission by an analysis tool which is called the RecurDyn. We compared it with a signal analysis experiment's which a robot operation happens which is based on the ambient noise.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1731-1734
• /
• 2003

We propose a unmaned integrating control system based-on Windows XP version Off-Line Programming System which can simulate a Robot model in 3D Graphics space in this paper. The robot with 4 and 6 axes modeled SM5 and AM1 respectively were adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed off-line program. The interface between users and the off-line programming system in the Windows XP's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by silicon Graphics, Inc. were utilized for 3D Graphics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.321.1-321
• /
• 2002

The object of this study is an examination of source of robot noise and reduction of the noise and the vibration for an industrial robot system. As the frist step in our study, the noise and the vibration from the robot are measured by microphones and by accelerometers and the source of the noise and the vibration are proved to be from the gear, shaft, and housing from the experiments. The occurrence of the noise may be classified according into kinds, Finally base on the result of the experiments, we consider a countermeasure fur reducing the noise and the vibration of robot system by the parametric study.

• 제어로봇시스템학회논문지
• /
• 제3권1호
• /
• pp.61-66
• /
• 1997

로보트 매니퓰레이터가 일정한 접촉 힘을 유지하며 공작물의 표면을 따라가게 하는 작업은 많은 자동화 생산공정에서 유용하게 이용될 수 있다. 일반적인 위치제어용 산업용 로보트를 이러한 공정에 사용하기 위해서는 접촉힘이 계측되어 로보트의 제어에 이용되어야만 한다. 이 연구는 accommodation force control 방식으로 산업용 로보트를 제어하여 edge-following에 응용하도록하며, 접촉 힘의 계측에는 wrist force sensor를 사용한다. 이 시스템의 궤도추적속도와 force regulation 등이 예견제어에 의해 향상될 수 있다. 예견제어에 의해 설계된 전체 제어 시스템은 feedback 제어기와 feedforward 예견제어기로 구성된다. 여기서, 시스템의 안정성은 feedback 제어기에 의해서 결정되며, 예견제어기는 시스템에 미치는 외란을 통제하는 것을 주 기능으로 한다. 일반적으로 선형제어 방식을 채택한 경우와 예견제어를 이용한 edge-following을 실험을 통해 비교함으로써, 예견제어의 효용성을 확인한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.745-750
• /
• 2008

Uncertain dynamic parameters and joint flexibility have been problem to control robot manipulator precisely. Hence, even if the controller tracks the desired trajectory well with the feedback of the motor encoders, it is hard to achieve the desired behavior at the end-effector. In this paper, robot trajectory is taught by a general heuristic iterative learning control (ILC) algorithm in order to reduce tracking error of the tool center point (TCP) and the results of tracking with 6 DOF industrial robot manipulator are presented. The performance is verified based on ISO 9283.