• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.1
• /
• pp.55-73
• /
• 2024

Unicorn companies are attracting attention around the world as they are recognized for their high corporate value in a short period of time as an innovative business models. Their growth process presents good lessons for the startup ecosystem and have a positive impact on national economic development and job creation. However, previous studies related to unicorn companies are focused on 'event studies' and 'case studies' such as characteristics of founders, environmental factors, business models and success/failure cases of companies already recognized as unicorns rather than a multifaceted approach. The occurrence of unicorn companies and Macroscopic analysis of related factors is lacking. Against this background, this study are considering the characteristics of unicorns examined through previous research and the current status unicorns with a high proportion of technology companies, the purpose was to analyze the impact of the country's technological competitiveness, such as 'technology human resource index', 'R&D index', and 'technology infrastructure index', on the increase in unicorn companies. For statistical analysis, data published by various international organizations, the Bank of Korea, and Statistics Korea from 2017 to 2020 and unicorn company data compiled by CB Insights were used as panel data for 44 countries to be tested by multiple regression analysis. As a result of the study, it was confirmed that the number of science majors had a positive (+) effect on the increase of unicorn companies in the case of technology human resource index, and in the case of R&D index, the total amount of R&D investment had a positive (+) effect on the increase of unicorn companies, while the number of Triad Patents Families and the number of scientific and technological papers published had a negative (-) effect on the increase of unicorn companies. Finally, in the case of technology infrastructure index, it was confirmed that the number of the world's 500th-ranked universities had a positive (+) effect on the increase of unicorn companies. This study is the first to reveal the causal relationship between national technological competitiveness and unicorn company growth based on country-specific and time-series empirical data, which were insufficiently covered in previous studies. and compared to the UN's ranking of the global industrial competitiveness index and the OECD's total R&D investment by country, Korea is considered to have technological and growth potential, while the number of unicorn companies driving growth as leaders of the innovative economy is relatively small, so the research results can be used when establishing policies to discover and foster unicorn companies in the future.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.1
• /
• pp.119-133
• /
• 2024

As a result of significant investments by the government in promoting public technology commercialization and fostering a venture startup ecosystem, there have been quantitative achievements, such as the registration of over 1,600 Innopolis Start-ups since 2006, generating a total revenue of 1.1 trillion won as of 2021. However, these achievements have been overshadowed by critical qualitative challenges, including a continuous decline in average revenue per Innopolis Start-up. This led to a focus on whether managers' technological and market orientations affect business performance. This study aims to provide insights into improving the qualitative growth of Innopolis Start-ups by analyzing the effects of technological and market orientations on business performance, as well as the moderating effects of adjusting marketing and research and development (R&D) costs on this relationship. Through prior research and empirical analysis, this study derives three main findings. First, technological excellence and innovation significantly influence the business performance of Innopolis Start-ups, while technological intensity does not. Second, customer orientation and competitive orientation significantly impact business performance, whereas entry barriers as a single factor do not. Third, adjusting marketing and R&D costs, as controlled variables obtained through general situations, has no direct impact on other variables. However, it interacts with entry barriers, influencing financial business performance, with R&D costs exhibiting a negative buffering effect and marketing costs showing a positive enhancing effect. This study confirms that both technological and market orientations directly influence the business performance of Innopolis Start-ups, thus being crucial factors affecting their growth. Moreover, it establishes that investments in marketing and R&D play significant roles in alleviating initial entry barriers and enhancing financial performance. Consequently, it underscores the importance of reinforcing technological and market orientations tailored to the characteristics of Innopolis Start-ups. Additionally, it proposes five theoretical contributions: strengthening institutional support systems for technology commercialization and innovation, improving qualitative evaluation criteria during the selection process of Innopolis Start-ups, conducting comprehensive analyses of technological and market aspects during startup selection, enhancing support for marketing education and consulting for smooth market entry, and supporting expenditure strategies and milestone setting tailored to the industrial characteristics of individual Innopolis Start-ups.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.275-289
• /
• 2023

Since the implementation of the Living Modified Organisms (LMOs) Act in 2008, approximately 10 million tons of genetically modified corn, soybean, potato, canola, and other crops have been imported into South Korea. The import approval procedures have been completed for approximately 191 cases that include seven crops. Of these, approximately 90 cases, excluding crossbreeds of approved LMOs, were reviewed via consultation risk evaluation in four areas: human health, crop culture, natural ecology, and marine fishery environment. LMO developers in South Korea, who are major stakeholders in the import of LMO crops produced overseas, have raised concerns regarding procedural inefficiency in consultation reviews and the need of excessive reviews that are unsuitable for food-feed processing purposes. These procedures reflect the perspective of consultation agencies that deviate from the nature of risk assessment and demand specific supplementary data that do not reflect familiarity and substantial equilibrium. Based on frequent instances of unintentional environmental release of LMO crops imported into Korea, the ministries responsible for consultation insist on a review that considers the climate and natural environment of Korea. In addition, the ministries mandate that their reviews reflect the expertise of competent ministries and are based on risk assessment principles and methods in accordance with international guidelines. In this regard, considering that traits introduced into LMO crops involving familiar agricultural crops have been considered safe for more than two decades, we have suggested reasonable alternatives to several risk assessment items for agricultural LMOs. These alternatives can mitigate conflicts of interest among key stakeholders within the scope of the current LMO regulations.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.703-715
• /
• 2023

This study was conducted to investigate the fermentation characteristics and anti-obesity effects of acetic acid fermentation products of coffee wine. The live cell counts, soluble solids, pH and total acidity of the acetic acid unfermented coffee wine (AUFCW; day 0, before fermentation) were 6.35 log CFU/mL, 8.10 °Brix, 3.88, and 1.29%, respectively, while the acetic acid fermented coffee wine (AFCW; day 15, after fermentation) were 4.40 log CFU/mL, 8.57 °Brix, 3.07, and 7.45%, respectively. Pancreatic lipase inhibitory activity tended to increase as the acetic acid fermentation period increased. The anti-obesity effects of AFCW on 3T3-L1 cells, which was induced by MDI, were evaluated based on the lipid accumulation rate, leptin expression, and fat production-related gene expression (PPAR-γ and SREBP-1c) at the mRNA level. In the case of AFCW, the lipid accumulation rate and leptin expression were decreased to 69.37% and 50.20% at a concentration of 200 ㎍/mL, respectively, and the expression levels of PPAR-γ and SREBP-1c at the mRNA level were decreased to 79.89% and 48.81%, respectively. These results indicate that anti-obesity effect of acetic acid fermentation products could be increased by acetic acid fermentation of coffee wine.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.88-97
• /
• 2023

As livestock consumption in Korea has been gradually increasing, the quality of the final products has been improved to meet this increased demand. In particular, maintaining the water holding capacity (WHC) and minimizing the drip loss during the thawing of frozen meat are of utmost importance. This study investigated the physicochemical properties of frozen pork subjected to thawing under different conditions: at room temperature (20℃, under air), at a low temperature (4℃ refrigerator, under air), under water (20℃, under water in a vacuum bag), under microwave (microwave-thawing, 260 W), and under low-pressure tumbling (20℃, 0.015 bar, tumbling). The shortest thawing time for frozen pork was recorded upon low-pressure tumbling thus indicating a fast heat transfer. The lowest drip loss (0.2%) and highest WHC (94.5%) were also recorded under this condition. A significantly higher drip loss was observed upon microwave- (1.0%) and water-thawing (1.2%), which resulted in the lowest WHC in microwave thawing (87.2%). The highest total count of aerobic bacteria and coliform group were observed upon room temp thawing while the low pressure tumbling and thawing resulted in the lowest aerobic bacteria (1.90 log CFU/g) and coliform (0.78 log CFU/g) count. Consequently, thawing by low pressure tumbling afforded the best food quality.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.109-121
• /
• 2023

This study was conducted to evaluate vitamin D intake of Koreans in a total diet study (TDS) and to determine the effect of irradiation on vitamin D synthesis in mushrooms. For analysis, sample were saponified and extracted with hexane, and vitamin D was quantified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Based on the validation results, the recovery of the National Institute of Standards and Technology (NIST) standard reference sample (SRM) 1849a was 96.7% and the z-score of -1.6 was obtained by the Food Analysis Performance Assessment Scheme (FAPAS) proficiency test (PT) 21115. Vitamin D₂ was not detected in any samples, and the highest level of vitamin D₃ was detected in mackerel and anchovies ranging from 24.2 to 120.2 ㎍/kg. The mean daily intake of vitamin D was 0.99 ㎍/day, as estimated from the vitamin D contents of the analyzed foods and their corresponding intake. The adequate intake (AI) of vitamin D based on the Dietary reference intakes for Koreans provided by the Ministry of Health and Welfare is 5-15 ㎍/day for Koreans aged 6 to 75 years. Compared with this AI, vitamin D intake of Koreans estimated in this study was inadequate. For that, the increased vitamin D content in ultraviolet (UV)/sun light irradiated mushrooms warrants further research to increase vitamin D intake of Koreans through diet.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.669-682
• /
• 2023

The production of distilled soju by fermenting nonsteamed rice was evaluated using commercial enzyme products. White koji and modified nuruk had alpha-amylase activities of 31.90 U/g and 3,532.71 U/g, respectively, and gluco-amylase activities of 698.32 U/g and 4,899.58 U/g, respectively. The enzyme products had activities of 5,604.15-225,182.00 U/g and 13,517.41-120,822.41 U/g, respectively. At enzyme concentrations of >800 mg/L, the Chung-moo-purified enzyme had an alcohol productivity of ≥19%. Nurukzyme R400, Sanferm Yied, and Diazyme X4 exhibited alcohol productivities of >19% at concentrations of >600 mg/L. The alcohol content of the vacuum distillates was 41.31%-44.86%. The volatile component with the alcohol content adjusted to 25% was analyzed and principal component analysis was performed. The volatile components in white koji, Diazyme X4, and Sanferm Yield were similar. The modified nuruk treatment group had a relatively high ethyl lactate content compared to the white koji treatment group. The Nurukzyme R400 treatment group had high contents of butyric acid and ethyl butyrate. The Chung-moo-purified enzyme was characterized by a low component content. Thus, when enzyme products were used in nonsteamed rice fermentation, no effect on the alcohol productivity and quality of vacuum distilled soju was observed, suggesting that it can replace white koji and modified nuruk.

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.1082-1094
• /
• 2023

The purpose of this study was to examine the characteristics of Leuconostoc spp. isolated from radish kimchi and to investigate the potential for the use of functional ingredients by evaluating enzymatic characteristics, safety, and immune-enhancing effects among the isolates, including Lactobacillus rhamnosus ATCC53103 (LGG) as a control strain. All test strains exhibited β-glucosidase enzyme activity that releases β-1,4 sugar chain bonds. In addition, as a result of antibiotic resistance assay among the isolates, MIC values on 8 antibiotics were below compared to the EFSA standard, and hemolytic experiments confirmed that all showed gamma hemolysis without hemolytic ability. As a result of the antibacterial activity experiment, the Leu. mesenteroides K2-4 strain showed a higher activity than LGG against Bacillus cereus and Staphylococcus aureus. Additionally, the activity of the NF-kB/AP-1 transcription factor increased when the isolates were treated in macrophage RAW cells. These results were related to increasing the high mRNA expression levels on TNF-α and IL-6 by Leu. mesenteroides K2-4 strain to be treated at low concentration. Consequently, we suggest that it will be useful as a candidate for functional food ingredients.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.24-38
• /
• 2024

Five species of plants (Pimpinella brachycarpa (Kom.) Nakai, Hylotelephium erythrostictum (Miq.) H. Ohba, Magnolia sieboldii K. Koch, Sanguisorba hakusanensis Makino, Agastache rugosa (Fisch. & Mey.) Kuntze) native to the clean area of Mt. Jiri were selected. The collection period was from May to September 2021, and the five species plants were collected in their native habitats with flowers in full bloom. The collected plants were extracted with 70% EtOH and 17 kinds of polyphenol components were analyzed. Next, flowers, leaves and roots were separated from plants, extracted with 70% EtOH for each part and experiments were conducted on DPPH, ABTS, total polyphenols, and total flavonoids. The results are as follows. 1. There were a total of 13 polyphenol components contained in the 5 species of plants native to Mt. Jiri. Among them, the total content of the most detected substance was Sanguisorba hakusanensis Makino, which was 126.2 ppm, and the main substance was ellagic acid (=ELA), which was 122.4 ppm. 2. As a result of examining the DPPH radical scavenging activity, the flowers, stems, and roots of Sanguisorba hakusanensis Makino showed the best scavenging activity, while the flower extracts of other plants showed good scavenging activity. 3. The highest ABTS radical scavenging activity was Sanguisorba hakusanensis Makino flower extract at 13.5 ㎍/㎖, followed by roots at 16.8 ㎍/㎖ and leaves at 22.6 ㎍/㎖;. Although such a large ABTS radical scavenging activity could not be confirmed in other plants, the flower extract was overall better than the leaf and root extracts of other parts. 4. The highest total polyphenol content was found in the leaves of Magnolia sieboldii K. Koch, at 161.4mg GAE/g, followed by the highest content in the roots of Magnolia sieboldii K. Koch and the roots of Agastache rugosa (Fisch. & Mey.) Kuntze, at 130.0mg GAE/g. Also, the lowest was found to be Sanguisorba hakusanensis Makino. 5. The total flavonoid content was 186.2mg CAE/g in the roots of Agastache rugosa (Fisch. & Mey.) Kuntze, 166.9mg CAE/g in the flowers, and the lowest was 116.1mg CAE/g in the leaves. As shown in the results above, Sanguisorba hakusanensis Makino has excellent antioxidant efficacy and has a high polyphenol content, so it is expected to be fully utilized in the cosmetics industry in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.