• 제목/요약/키워드: 산소 센서

검색결과 255건 처리시간 0.032초

In-vitro 유동장에서 진동형 폐 보조장치를 이용한 산소전달 효율의 향상 (Enhancement of Oxygen Transfer Efficiency Using Vibrating lung Assist Device in In-Vitro Fluid Flow)

  • 권대규;김기범;이삼철;정경락;이성철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1332-1335
    • /
    • 2003
  • This paper presents the enhancement of oxygen transfer efficiency using the vibrating intravascular lung assist device (VIVLAD) in in-vitro experiments for patients having chronic respiratory problems. The test section was a cylinder duct with the inner diameter of 30 mm. The flow rate was controlled by the pump and monitored by a built-in flow meter. The vibration apparatus was composed of a piezo-vibrator, a function generator. and a power amplifier. The direction of vibration was radial to the fluid flow. Gas flow rates of up to 6 l/min through the 120-cm-Jong hollow fibers have been achieved by exciting a piezo-vibrator. The output of PVDF sensor were investigated by various frequencies in VIVLAD. The experimental results showed that VIVLAD would be enhance oxygen transfer efficiency.

  • PDF

DO 센서용 산소전극의 온도보상에 대한 일 방안 (A Method on the Temperature Compensation for the Oxygen Electrode for DO Sensor)

  • 이동희;최복길
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 추계학술대회 논문집 학회본부
    • /
    • pp.376-378
    • /
    • 1995
  • A method is presented for the design and fabrication of the temperature compensation circuits on the Clark electrodes for measuring the dissolved oxygen(DO) concentration. The discussion includes a method of the sensor interface circuits for the DO sensor. Typical polarograms for the DO probes under test using this sensor circuits are presented. High accuracy over 99 % of the I to V conversion using the proposed circuit is verified. Temperature dependence for the test DO probe is well compensated automatically using the thermistor($2k\Omega,\;25^{\circ}C$) in series with correction resistor in the feedback loop of the op-amp circuit in the temperature range of the 0-50$^{\circ}C$.

  • PDF

연료분사식 자동차엔진의 퍼지가변구조 제어시스템 (Fuzzy Variable Structure Control System for Fuel Injected Automotive Engines)

  • 남세규;유완석
    • 대한기계학회논문집
    • /
    • 제17권7호
    • /
    • pp.1813-1822
    • /
    • 1993
  • An algorithm of fuzzy variable structrue control is proposed to design a closed loop fuel-injection system for the emission control of automotive gasoline engines. Fuzzy control is combined with sliding control at the switching boundary layer to improve the chattering of the stoichiometric air to fuel ratio. Multi-staged fuzzy rules are introduced to improve the adaptiveness of control system for the various operating conditions of engines, and a simplified technique of fuzzy inference is also adopted to improve the computational efficiency based on nonfuzzy micro-processors. The proposed method provides an effective way of engine controller design due to its hybrid structure satisfying the requirements of robustness and stability. The great potential of the fuzzy variable structure control is shown through a hardware-testing with an Intel 80C186 processor for controller and a typical engine-only model on an AD-100 computer.

컨버터 OBD에 대한 연구 (A Study on Converter OBD)

  • 손건석;윤승원;김대중;전상진
    • 한국자동차공학회논문집
    • /
    • 제9권2호
    • /
    • pp.202-209
    • /
    • 2001
  • As a part of stringent emission regulations, OBD on a converter is requested by EU and CARB. It demands that MIL is light-on to inform the failure to the driver when the converter is failed in its function. Usually dual oxygen sensor method is used for converter OBD. For this, detail methods, like amplitude ratio, time delay and frequency ratio methods are adapted for vehicle application. Actually, the cars produced later than MY94 for US market are using one of these methods. In this study, OSCs of converters are investigated with an absolute measuring method. The converters are aged with a furnace aging, an engine bench aging and vehicle aging method to represent various aging condition in field applications. An OBD index that is used for TLEVs regulation is also investigated to find a relation between two parameters. The relations of these parameters with THC emission on vehicle are evaluated.

  • PDF

토양가스 측정을 위한 현장 모니터링 시스템 개발 (Development of In-Situ Monitoring System for measuring soil gas)

  • 유찬;이종범
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2005년도 학술발표논문집
    • /
    • pp.410-416
    • /
    • 2005
  • 생물학적 통풍법은 유류오염 지역에 자주 적용되는 정화공법이다. 이 과정은 지중에 산소를 충분히 공급함으로서 토착 미생물에 의한 오염성분의 분해를 가능하게 한다. 따라서 이 공법의 적용시 공정진행에 따른 공법의 효율성 분석과 장기적인 정화효율 예측을 위한 지중 가스성분의 모니터링 시스템 도입이 매우 중요하다. 그러나 우리나라에서는 아직 그 적용사례가 보고된 바 없다. 따라서 본 연구에서는 현장에서 토양가스 성분의 변화를 모니터링할 수 있는 시스템을 개발하여 적용한 사례를 시스템의 구성과 측정방법, 관측결과를 중심으로 소개하였다. 현장적용 결과는 토양가스 모니터링 시스템은 운용 시작 후 6개월동안 센서나 측정장비에서 문제가 발생되지 않았으며, 공정관리를 위한 공법효율성 분석에 필요한 자료를 지속적으로 제공하고 있다.

  • PDF

Polarographic 산소전극용 센서회로 설계에 대한 일 방안 (A Method on the design of the Sensor Circuits for the polarographic Oxygen Probes)

  • 이동희;최복길;김남정;강문호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 C
    • /
    • pp.1286-1288
    • /
    • 1994
  • Methods are described for the design and fabrication of the sensor circuits on the polarographic oxygen sensing electrodes. The discussion includes: a method for the +5V single-supply driving for the sensor circuits, a method of low power comsumption for the front-end electronics. Typical polarograms for the commercial DO probes using this sensor circuits are presented. High accuracy of the I to V conversion using the circuits is verified.

  • PDF

MPI 가솔린 엔진용 슬라이딩 모드 연료분사 제어기 설계 및 컴퓨터 제어 (Design and Computer Control of a Sliding Mode Fuel-Injection Controller for MPI Gasoline Engines)

  • 김종식;고용서;강건용;황이철
    • 대한기계학회논문집
    • /
    • 제15권3호
    • /
    • pp.1030-1043
    • /
    • 1991
  • 본 연구에서는 모델링오차나 외란 등의 불확실성에도 강인한 슬라이딩 모드 제어방법을 이용하여 새로운 연료분사 제어기를 설계하였다. 그리고 8253 타이머와 A/D 변환기, 인터페이스회로 등으로 MPI가솔린 엔진용 전자 제어장치를 실제 엔진에 적용시킴으로써 새로이 설계된 연료분사 제어시스템의 성능을 파악하였다.엔진의 운전상태를 여러가지 제어 모드로 분류할 수 있으나 엔진회전수가 2000rpm, 부하가 20N의 일정한 부하 조건에서 엔진회전수를 1500rpm에서 2000rpm으로 변화시켰을 때의 과도상태 응답을 파악하였다. 이와 같이 새로운 슬라이딩 모드 연료분사 제어시스템 을 개발하여 3원촉매 변환기의 변환효율을 극대화함으로써 배기가스의 유해물질을 최 소화하는 것을 본 연구의 목적으로 하였다.

기계경비용 전기센서필터의 압전박막 특성 (Piezoelectric Thin Film of Electrical Sensor Filter for Security System)

  • 이동윤
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
    • /
    • pp.595-597
    • /
    • 2008
  • RF 마그네트론 스퍼터링 법으로 ZnO박막을 실리콘기판 위에 증착 하였고, 인가전력에 따른 박막의 결정학적, 전기적 특성을 연구하였다. 기판온도 $200^{\circ}C$, 산소:아르곤 가스의 비율이 50%:50%, 증착압력이 10mTorr의 조건에서 RF 전압에 따라 증착된 박막은 강한 c-축 성장과 우수한 결정성을 나타내었다.

  • PDF

후막형 용존 산소 센서의 전기적 특성 (Electrical properties of thick film dissolved oxygen sensors)

  • 이경준;정경진;이성필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
    • /
    • pp.92-95
    • /
    • 2003
  • The dissolved oxygen sensors with thick film type were fabricated for low cost products and the electrical properties were investigated in the different operating temperatures. Pt paste was used for working electrode and Ag/AgCl paste for reference electrode. The fabricated devices have fast response of current changes according to dissolved oxygen concentrations in the applied voltage of $0.6{\sim}0.8V$. This is expected to apply a chip and/or disposal dissolved oxygen sensors.

  • PDF