• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1301-1304
• /
• 2012

Mineral contents of various salts were determined by the ICP-OES method. Bamboo salt (baked 9 times) contained more potassium, calcium, magnesium, and manganese, compared to purified and solar salts. Bamboo salt had a pH of 11.04, higher than those of purified (6.29) and solar (9.13) salts. Contents of [$OH^-$] were measured by using the FT-IR spectra. Bamboo salt exhibited higher reduction potential and contained more OH groups than purified and solar salts. The reduction peak of bamboo salt was observed to be about three times broader than that of solar salt in terms of redox potential amperometry. At a salt concentration of 25%, bamboo salt showed higher radical scavenging activities (81.4%) than solar (5.0%) and purified (2.0%) salts, as evaluated by DPPH assay. Bamboo salt revealed alkaline property, more OH groups and antioxidative activity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.447-450
• /
• 2009

2세대 바이오연료 생산에 적용되는 미세 조류의 열화학적 전환 특성을 열천칭 반응기를 이용하여 고찰하였다. 반응 온도 (500 - $800^{\circ}C$)와 수분 함량 (0-60wt.%)을 변수로 하였으며 미세조류로서 가장 널리 이용되는 클로렐라를 이용하였다. 대표적인 열화학적 전환 반응인 열분해, 부분 산화 (5%), 연소 반응을 고찰하였으며 실험 영역에서 반응온도 및 산소의 분압이 증가함에 따라 탄소 전환율이 증가하였으며 Shrinking-core model을 사용하여 반응 차수를 구하였다. 가스화 영역인 부분 산화 (5%) 조건에서의 activation energy와 frequency factor 값은 각각 19.60 kJ/mol, $2.47{\times}10-1\;s^{-1}$ 이었으며 산소 분압에 의한 반응 차수는 0.209 임을 확인하였다. 수분 함량에 따른 클로렐라의 반응 특성을 살펴보면, 수분 함량이 증가함에 따라 탄소 전환율과 반응성이 감소하는 경향이 발견되었다. 열분해의 경우, 건조 시료에 비하여 수분 함량이 늘어남에 따라 탄소 전환율과 반응성이 급격하게 감소하는 경향을 보였다. 반면, 부분 산화(5%) 및 연소의 경우에는 건조 시료, 수분 함량 20, 40% 시료의 탄소 전환율과 반응성은 거의 일정하였다. 그러나 수분 함량이 60%가 되면서 탄소 전환율 및 반응성이 급격히 떨어졌다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.282.2-282.2
• /
• 2014

Cr의 함량과 주입 가스의 유량 비율을 변화하여 ZnCrO 박막의 구조적 특성에 미치는 영향과 그것이 자기적 특성에 관여하는 상관관계 등에 관하여 조사하였다. ZnCrO 박막을 Pt/Ti/Al2O3 기판 위에 Sputter법으로 증착하였으며, 이 때 양질의 ZnCrO 박막을 제작하기 위하여 산소 분압 변화에 따른 박막의 표면 및 구조적 특성을 관찰하였다. 아르곤과 산소 분압이 1 : 1 (Ar : O2=15 sccm : 15 sccm) 이었을 경우, 가장 매끄러운 표면을 갖고 또한 구조적으로도 안정된 ZnCrO 박막을 얻을 수 있었다. 동일한 조건에서 Cr 함량을 변화시켜 본 결과, Cr 함량이 작아질수록 자기적 특성이 향상되는 것이 관측되었다. 즉, Cr의 함량이 감소할수록 Cr 입자 1개 당 유효 자화도가 증가하는 것이 관측되었는데, 이러한 결과는 Cr 함량 변화에 따는 ZnCrO 박막의 결정 자기이방성 변화에 따른 것이다.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.157-160
• /
• 1992

Unusual surface impurity levels of PREPed Ti-51at%Al powders were analyzed using Auger spectroscopy and they were compared with these obtained from bulk starting electrode. Oxygen and carbon contents were varied very much with particle size. Powder surfaces were believed to be mainly covered by a complex compound containing Ti, Al, O, and C. The decrease in contents of oxygen and carbon of powders were attributed to the certain refining reaction of transfer type DC Ar plasma during the powder production.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.191-195
• /
• 2000

Electrochemical properties of the oxygen electrode in phosphoric acid fuel cell have been studied using AC impedance method as a function of applied potential, operating temperature and teflon content in the electrode. The oxygen electrode reaction in the $105wt.\%$ phosphoric acid is characterized by a parallel resistive component, $R_p$ and a capacitive component, $C_p$ with serial electrolyte resistance, $R_s$. The conductivity of the phosphoric acid is found to be 0.31-0.47 S/cm in the range of $130\;to\;190^{\circ}C$ from the measured impedance. The increase of applied potential and temperature produced the decreased RP and the increased $C_p$, which means the increase of the oxygen electrode reaction rate. The single cells with the cathode of various teflon contents were tested, and the cathode with $40wt.\%$ teflon showed good performance, which is considered to be related to an optimized impedance behavior.

• Electrical & Electronic Materials
• /
• v.4 no.1
• /
• pp.65-72
• /
• 1991

본 논문은 전극의 표면상태가 기체방전의 전리성장과 특성에 미치는 영향에 관한 것으로 질소-산소 혼합가스중의 순수전극과 오손전극의 상태에서 전압-전류 특성과 글로우방전 개시전압을 측정하였다. 순수전극의 경우, 압력과 전극간의 거리의 곱이 8(Torr-cm)이하이고 산소의 혼입량이 0.005(%)이하일 때의 전리성장은 암류로부터 안정타운젠트방전을 거쳐 글로우방전으로 이행되었으며 글로우방전 개시전압은 거의 일정하였다. 동일의 전극표면상태에서 조차 방전개시전압은 산소혼입비에 의존하며 방전횟수에 따른 이의 변화는 산소의 함량이 0.1(%)부근에서 크게 나타났다. 방전횟수와 산소혼입량의 증가에 따른 방전개시전압의 상승은 주로 전극표면에서의 산소흡착층의 형성과 부착작용에 의한 NO, $O_{2}$, NO$_{2}$, $O_{3}$와 간은 부이온의 생성에 기인된 것으로 여겨진다.

• Membrane Journal
• /
• v.10 no.4
• /
• pp.205-212
• /
• 2000

The true-lPN's based on silicone rubber(SR)rrubbery polymer) and polystyrenc(PS)(glass polymer) were prepared by using the sequential IP!\' method_ The characteristic of permeability of oxygen/nitrogen was investigated with the control of the amount of PSOO-70 wt%) in the true-lPN, As a results of fTlR and N1Vm. the SRIPS membrane was synthesised successfully with the IPN synthetic method, Thermal analysis resulls indicated that the degree of mixing of IPN increased with increase of the amount of PS in the IPN. Regarding the characteristic of gas permeability, the membrane showed a trend of decrease in oxygen permeability as the PS content increased, The oxygen permeability of membrane having 50 wt% of PS. however, increased momentarily, Selectivity, meanwhile, increased slightly as the contents of I'S increased. However, the maximum value of oxygen selectivity, which is 20.6% enhanced Value, was obtained with the membrane containing 50 wt% of PS. This can be explained that the behavior of lPN, i.e. mutual assistance, is pronounced in the membrane having 50 wt% of PS.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.60-65
• /
• 2012

The Ti-6Al-4V alloys were prepared by recycling of dental Ti pure scraps using vacuum arc melting process, and their physical properties were evaluated the Ti-6Al-4V alloys with different oxygen concentrations. For the preparation of Ti-6Al-4V alloys, Ti pure scraps used for dental implant were utilized as a raw material, and their different oxygen concentrations were ranged from G1 to G4 grade in ASTM standards. It was confirmed that the weight loss of Al in the composition of Ti-6Al-4V alloy could be controlled under the Ar pressure of 875 torr during the melting of alloy. The oxygen concentrations of the Ti-6Al-4V alloys were ranged from 1170 to 3340 ppm. The vickers hardness change of the Ti-6Al-4V alloys showed a similar behavior with that of pure Ti. As a result, we confirmed a possibility of preparation of Ti-6Al-4V alloy by recycling of dental Ti scraps using vacuum arc melting process in this study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.2
• /
• pp.153-160
• /
• 2013

The peel from seven types of citrus was extracted with 80% methanol, and their phenolic compound content, oxygen radical absorbance capacity (ORAC), inhibitory activities of nitric oxide (NO), and reactive oxygen species (ROS) production induced by LPS and t-BHP in LPS-activated RAW 264.7 cells were measured. Total phenolic content was high in Yungkyool, Cheonhyehyang, and Jinkyool (30.6, 30.2, and 28.2 mg GAE/g, respectively), while total flavonoid content was high in Yungkyool and Jinkyool (30.3 and 25.5 mg RE/g, respectively). ORAC was the highest at 1,076 mM TE/g in Yungkyool, followed by Cheonhyehyang (1,012), Jinkyool (984), and Hallabong (914). High inhibitory activity against NO production was shown in Cheonhyehyang, Yungkyool, and Jinkyool with $IC_{50}$ values of 215.3, 259.2, and 328.9 ${\mu}g/mL$, respectively. LPS-induced ROS production was inhibited by 16.4% and 12.8% in Hallabong and Jinkyool, while t-BHP-induced ROS production was inhibited by 28.7%, 26.1%, and 26.6% in Jinkyool, Hallabong, and Cheonhyehyang, respectively. Correlation coefficients between total phenolic, total flavonoid content, and ORAC were 0.884 and 0.855. Inhibitory activity against NO production showed higher correlation with total phenolic content than total flavonoid content. It was concluded that citrus peels had potent antioxidant activities and could be used as natural antioxidants in the food and pharmaceutical industries.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.139-150
• /
• 2006

Landfilling is one of the most widely used methods for the final disposal of solid wastes. Landfilled wastes are degraded by residing microorganisms and the microbial degradation is affected by many factors such as moisture, oxygen, pH, alkalinity, sulphate, nutrient, temperature, and so on. Especially among these factor, oxygen and moisture within aerobic landfill play a major role in microbial degradation. In this study, 1) the effects of oxygen on the velocity of waste degradation and 2) the effect of moisture on the degradation of municipal solids waste (MSW) in aerobic condition were investigated. It was found that the BOD and CODcr concentration from the leachate of aerobic lysimeters dropped faster by 80 days after the start of the test compared to those from the anaerobic lysimeters. To see the effect of moisture, four aerobic lysimeters filled with MSW and four different levels of moisture (20, 30, 40, and 50%) were installed. From this test, higher moisture in MSW produced higher $CO_2$ concentration, meaning moisture was effective for the microbial degradation. thus, we concluded that higher moisture level in the aerobic landfill might help early-stabilization microbial degradation.