• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.355-355
• /
• 2004

사용후핵연료 금속전환체는 세라믹형 사용후핵연료를 리튬용융염으로 금속전환하여 생성한 우라늄금속으로 상온에서도 표면산화가 진행될 정도로 매우 불안정한 상태이다. 이에 대한 저장 안정성 향상방안을 도출하기 위해 금속전환체의 주성분인 금속우라늄과 산화 안정화물질인 Nb을 첨가한 모의 금속전환체 합금을 제작하여 $200^{\circ}C~300^{\circ}C$ 온도구간에서 열중량분석기(TGA)를 이용해 순수 산소분위기로 산화시험을 수행하였다.(중략)

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.635-641
• /
• 2002

Electrical conduction of $SrZrO_3$ doped with $Y_2O_3$ was measured as a function of gas atmosphere and temperature by impedance spectroscopy. Hydrogen dissolution, due to an enhanced driving force in the presence of oxygen, results in protonation by water incorporation. Proton conductivity increased with water vapor pressure, ${P_w}^{1/2}$. In the pure hydrogen atmosphere, the dissolution of hydrogen,$H_2(g)=2H_{i}$ +2e', is supposed to be driven by a reduced activity of electrons, ascribable to their trapping in oxygen vacancies. The activation energy of electrical conductivity was 50 kJ/mol, in wet argon atmosphere in the temperature range of $600~900^{\circ}C$, similar to those reported for proton conduction in the literature. Grain boundary effect in proton conduction was substantial in the 10% doped case at temperatures lower than $700^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.738-743
• /
• 1997

PVC핏치의 제조 조건에 따른 물성 변화 및 산화 안정화에 영향을 미치는 공정 변수를 연구하기 위하여 열중량 분석을 하였다. 산소 분위기를 사용하여 안정화온도, 승온속도 및 가스의 유량을 변화시켜 조사하였다. 안정화 온도가 높아짐에 따라 무게증가를 나타내는 시간구간이 짧아지고 결합되는 산소의 양은 감소하는 경향을 나타내며, 29$0^{\circ}C$정도로 안정화 온도가 높은 경우에는 결합되는 산소의양이 최대점에 도달한 후 다시 감소하는 경향을 나타냈다. 승온속도가 빨라짐에 따라 결합되는 산소의양은 감소하는 경향을 나타내었으나, 가스의 유량은 본 연구에서 설정한 범위 내에서는 영향이 관찰되지 않았다. 핏치 입자 직경이 커짐에 따라 최대 무게증가 값은 감소하고 최대 무게증가를 나타내는 온도는 증가함을 알았다. 그리고, 안정화에 의한 무게증가가 클수록 PVC핏치의 탄소수율은 감소하는 경향이 나타났다.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.133-137
• /
• 1996

본연구에서는 n-type 세라믹 초전도체인 Nd2-xCexCuO4상의 산소함량에 따른 \ulcorner기적저항의 변화를 고찰하고자 하였다. 일반적인 소결과 어닐링과정을 결쳐 제조된 Nd1.85Ce0.15CuO4-x 시편을 여러 온도와 산소분압의 분위기하에서 어닐링시킴으로써 산소의 함유량이 다른 시편들을 준비하였고 각각의 시편의 산소함량은 TGA(Thermogravimetric Analysis0에 의해 측정하였다. Nd1.85Ce0.15CuO4-x시편의 전기적 저항 측정은 표준 4-탐침방법을 이용하여 액체헬륨을 주입시켜 상온으로부터 4K까지 측정하였다. Nd1.85Ce0.15CuO4-x시편의 산소함량, 3.96$\leq$4-x$\leq$4.0의 범위에서 전기적저항을 측정한 결과 초전도특성이 나타나기 시작한 임계산소함량은 4-x=3.990이었고 이때의 임계온도 Tc=12K이었다. 또한 임계온도, Tc는 산소함량 4-x=3.96에서 24K로 측정되었다. 특이할 만한 현상은 CuO/Cu2O 열역학적 상전이가 일어나는 조건이 Nd1.85Ce0.15CuO4-x 시편의 초전도가 일어나는 임계와 일치하였다. 즉, Cu2O가 안정한 영역에서는 초전도특성이 나타났고 CuO가 안정한 영역에서는 초전도특성이 나타나지 않았다.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.98-103
• /
• 2010

The effect of plasma treatment on surface characteristics of polycarbonate (PC) films was investigated using low pressure plasma and atmospheric pressure plasma with oxygen and argon. Untreated PC has a contact angle of $82.31^{\circ}$ with de-ionized water which reduced to $9.17^{\circ}$ as the lowest value after being treated with a low pressure plasma treatment with oxygen. Increase of delivered powers such as RF and AC with a high frequency and gas flow rates was not effective to reduce contact angles dramatically but gave the trend of reducing gradually. The surface of PC treated with plasma shows a low contact angle but the contact angle increases rapidly according to the exposure time in air ambient. Oxygen plasma was more effective to generate the polar functional group regardless of the type of plasma. Conclusively, a low plasma treatment with oxygen is more recommendable when the hydrophilic surface of PC is required.

• Economic and Environmental Geology
• /
• v.37 no.4
• /
• pp.375-381
• /
• 2004

Pyrochlore was known as one of the most promising materials for the immobilization of radioactive actinide. This study includes the synthesis, phase relation and characteristics of pyrochlores (CaCeH$f_xTi_{2-x}O_7$=0.2, 0.6, 1.0, 1.4, 1.8, 2.0) in the system of Ca-Ce-Hf-Ti-O. The samples were prepared from high purity of starting materials under the pressure of 400kg/cm$^2$ at room temperature, and were sintered at 1200∼1$600^{\circ}C$ The synthesized samples were analyzed and identified with XRD. The optimal formation conditions of pyrochlores were at 1300∼150$0^{\circ}C$ under $O_2$ atmosphere with batch compositions. During synthesis, pyrochlore, perovskite and $A_{2}BO_{5}$ oxide were formed. The characteristics of this system is that parameter of pyrochlore was increased with the content of hafnium. This phenomenon was due to the difference of ionic size between hafnium and titanium in six coordinated site.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.355-358
• /
• 2010

Inductively coupled low temperature plasmas with oxygen, argon, mixture of oxygen and argon, and nitrogen have been used to modify polycarbonate(PC) films at the various process conditions. All plasma treatments generally had a tendency to increase the surface roughness of PC regardless of process conditions. The treatment of oxygen plasma showed the highest value in the surface roughness and mostly enhanced the generation of oxygen containing polar groups as much as 43% in comparison of untreated PC. The contact angle of untreated PC decreased from $82.31^{\circ}$ to the lowest value of $9.17^{\circ}$ after oxygen plasma treatment. The increase of RF delivered power had an effect on the rapid reduction of contact angle, but gas flow rates did not effect to reduce contact angles so much.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.26-31
• /
• 2003

The power loss characteristics of Mn-Zn ferrite were observed with the sintering temperature. In case of $1150 ^{\circ}C$ sintering, the core loss increased with measuring temperature, and does not have minimum value at the point where the magnetocrystalline anisotropy be 'zero'. This reason mainly due to the change of core loss mechanism with grain size which affects residual loss. The grain size and sintered density slightly increased with equilibrium oxygen partial pressure at$ 1150 ^{\circ}C$ sintering. The resistivity and initial permeability showed no significance with atmosphere, these results due to complex effect of $Fe^{2+}$ concentration and microstructure change. The core loss at $100^{\circ}C$ decreased as the equilibrium oxygen partial pressure increased.e increased.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.657-662
• /
• 1999

Mn-Ni oxide thin films for NTC thermistor application were sputtered on alumina substrates at $320^{\circ}C$ Effects of various oxygen partial pressures and annealing temperatures on the microstructure, crystal phase, resistivity and B constant were investigated. In general, microstructure of the films deposited was columnar grain structure. After annealing at $700^{\circ}C$, the microstructure was begun to transform to equiaxed grain structure. Most of the phases were mixture of cubic spinel and $Mn_2$$O_3$. As the oxygen concentration increased, the resistivity and B constant were greatly decreased, and these values become low and stable after annealing between $600^{\circ}C$ and $700^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.341-345
• /
• 2000

We investigated the microstructures and the electrical properties of $ZrO_2$thin films deposited by reactive DC magnetron sputtering on (100) Si with different deposition conditions and annealing treatments. The refractive index of the $ZrO_2$ thin films increased with annealing temperatures and deposition powers, and approached to the ideal value of 2.0~2.2. The $ZrO_2$thin films deposited at the room temperature are amorphous, and the films are polycrystalline at the deposition temperature of $300^{\circ}C$. Both the thickness of the interfacial oxide layer and the root-mean-square (RMS) value of surface roughness increased upon annealing in the oxygen ambient. The Cmax value and leakage current value decreased with the increase of thickness of the interfacial oxide thickness.