• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.66-74
• /
• 1997

Influence of the axial dispersion on immobilized enzyme catalytic bed was investigated in order to examine the kinetic behavior of the biocatalysis. The enzyme employed in this study was the tyrosinase(EC 1.14.18.1) immobilized on carbon support : this system requires two substrates of phenol and oxygen. This enzyme has potential application for phenol degradation in waste water. A simulated reactor was a packed-bed reactor of 2.54cm in diameter and 10cm long, loaded with the immobilized carbon particle with an average diameter of $550{\mu}m$. A phenol feed in the strength of 55.5mM(5220ppm) was used to observe the behavior of the immobilized enzyme column at three different dissolved oxygen levels of 0.08445mM(2.7ppm), 0.1689mM(5.4ppm) and 0.3378mM(9.5ppm) with the flow rates in the range of 60(1mL/s) to 180mL/min(3mL/s). Examination of the Biot number and Damkolher numbers of the immobilized system enables us to eliminate the contribution of external mass transfer to set of differential equations derived from the dispersion model. Solution of the equation was finally obtained numerically with the application of the Danckwert boundary conditions and the assumed zero-and first order rates on the non-linear two substrate enzyme kinetics. Higher conversion of phenol was observed at the low flow rates and at the higher oxygen concentration. Comparison of axial dispersion and plug flow model showed that no detectable difference was observed in the column outlet conversion between the axial and the plug flow models which was in complete agreement with the previous studies.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.97-103
• /
• 2023

Barrier films for transparent packaging materials with excellent moisture barrier properties are prepared, utilizing a nanoclay dispersion coating layer formed after a pretreatment process of plasma activation surface treatment process under vacuum at room temperature. Attention is paid on optimizing the coupling additive through the appropriate crosslinking process and optimal dispersion process of the coating process to enhance adhesion. Analysis of the functional coating thin film shows that the water vapor transmission rate is less than 10 g/m²/24 hrs (ASTM F-1249) and the oxygen transmission rate is less than 30 cc/m²/24 hrs (ASTM D3985). It is shown that water barrier properties of coating thin film prepared in this study are greater than conventional untreated films by 10 times or more. The thickness of the transparent gas barrier film is within 0.1 mm, and the transparent gas barrier complex is implemented in two layers. In the study of PET thin film interface characteristics, FT-IR experimental analysis shows the reaction activity was optimized at RDS 1.125 %.

• Korean Journal of Environmental Biology
• /
• v.24 no.3
• /
• pp.240-247
• /
• 2006

The dynamic of zooplankton community and its relationship with dissolved oxygen were studied at the Soho area of Gamak Bay from 22 August to 15 September in summer. We found that zooplankton were in low abundance or absent from bottom waters when oxygen concentrations were <3 mg $L^{-1}$. The relationship between summer low-oxygen in bottom-layer and zooplankton community structure was discussed at vertical abundance in Soho area of Gamak Bay. To examine effects of bottom-layer low-oxygen on abundance and vertical distributions in the stratified Soho area, zooplankton was surveyed near-surface, within the near-bottom in the study area under a range of near-bottom dissolved oxygen conditions. There were vertical variation in total zooplankton abundance in the study area (ANOVA, P<0.05). Overall abundance of zooplankton: copepod nauplii, Oithona sp. and tintinnids were lower throughout the water column when bottom-layer DO was low (${\leq}3mg\;L^{-1}$). In this context it was postulated that zooplankton distribution in the Soho area of Gamak Bay might be controlled by dissolved oxygen condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.462-465
• /
• 2007

석탄가스화 수소생산 기술 분야는 석탄 등의 화석연료를 이용하여 고온, 고압하에서 반응가스(산소, 수증기, 수소)와의 화학적 반응을 통해 생산된 연소성 가스 ($H_2$, CO, $CO_2$ 등)를 전환반응(WGS) 및 분리반응을 거쳐 효율적으로 청정하게 수소를 생산해 내는 기술이다. 전력산업에서 석탄가스화 수소생산은 그 사용 방법(연료전지, 수소 터빈, 분산 이용 등)에 따라 발전시스템의 고효율화를 지향하고, zero-emission을 실현하는 첨단 발전 시스템의 종합 구현을 목표로 하고 있으며, 더불어, 도래하는 수소 경제로의 전이에 대비에 석탄을 이용한 중앙(Central) 수소생산 시스템을 구현하여 이송 및 전환을 통한 지역적 분산 이용을 가능케 하는 종합적인 인프라를 구축하는 기술이다. 본 기술에는 석탄가스화 기술, 수성가스 전환기술, 수소/$CO_2$ 분리기술, 이송용 연료 전환기술 등이 포함된다. 석탄가스화 수소생산 기술은 급등하는 오일 가격과 이의 수입사용 증가에 대응하기 위한 에너지 안보 대책 마련 및 효율 극대화의 필요성과 더불어, 전력산업에서 화력 발전시스템의 궁극적 실현 목표인 고효율, 초청정의 전력생산 시스템의 구현을 가능케 하여, 향후 화석 연료를 이용한 미래 발전 기술을 선도 할 것으로 기대된다. 더불어, 수소 경제로의 전환 시 수소 수요의 급팽창에 대비한 경제적인 대규모 수소생산 기술의 개발이 필요하며, 이에 기술 실현성이 가장 높은 석탄가스화 수소생산 기술의 개발 구현이 요구된다.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.72-78
• /
• 1996

A computer program COVAFIT has been developed and applied to the evaluation of experimental cross sections for MeV energy incident particles. The program utilizes weighted least-square linear regression method with high-order polynomials derived in this study. Meeting the growing demand for the treatment of covariances in nuclear data, it deals with the variance and covariance data provided along with experimental cross sections and yields those for the evaluated ones. The evaluated results on two sets of neutron total cross section of oxygen and three sets of proton cross section for $C^{11}$ production reactions confirm the methodology formulated in and the applicability of the program.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.200-207
• /
• 2020

In this study, the effect of calcination temperature on the production of RuTi catalyst in NH₃-SCO (selective catalytic oxidation) was investigated. The RuTi catalyst was prepared using the wet impregnation method, and calcined at 400~600 ℃ for 4 h in air condition. The catalysts were named RuTi x00 where x00 means the calcination temperature. According to XRD (X-Ray diffraction), TEM (transmission electron microscope), H₂-TPR (H₂-temperature programmed reduction) analyses, RuTi x00 catalysts displayed that the dispersion of active metal decreased via increasing the calcination temperature. The catalysts with low dispersion showed a decrease in the surface adsorption oxygen species (O_β) and NH₃ adsorption amount via XPS, and NH₃-TPD analyses. Therefore, the RuTi 400 catalyst was well dispersed in the active metal on TiO₂ surface, and also, the NH₃ removal efficiency was excellent.

• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1083-1087
• /
• 1999

Microstructures and the gas-sensing characteristics of the $\textrm{SnO}_2$ thin films were studied, which were deposited at various conditions (rf power, sample temperature, $\textrm{O}_2$/Ar ratio) by the rf magnetron sputtering. As a result, six typical microstructures were derived, such as amorphous(A), amorphous mixed with polycrystalline grains (A+P), polycrystalline with random crystalographic orientation (P), fine columnar (FC), coarse columnar (CC) and Zone T (T) with dense fiberous structure. Typically, A, A+ P, and P structures were formed when no $\textrm{O}_2$ was added to the sputter gas, whereas FC, CC, and T structures were obtained when $\textrm{O}_2$ was added. The A structure formed at low rf power and low temperature, the A+P at high rf power and low temperature, and the P at high rf power and high temperature. The FC structure was obtained at low rf power and low temperature. the CC at low rf power and high temperature, and the T at high rf power and low temperature. Results of the gas-sensing test of the sensor chips fabricated from the typical films indicated that the fine columnar microstructure shows the highest sensitivity both at $300^{\circ}C$ and $400^{\circ}C$. It was proposed that this is due to the high specific surface area of the micro-columns.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.04a
• /
• pp.49-49
• /
• 1992

분리막법이 기체 분리에 응용된후 에너지 소비의 절감, 열안정성 등과 같은 장점들로 인해 수소회수 및 $H_2/CO_2$의 비율조정, $CH_4/CO_2$ 분리, $O_2/N_2$의 분리 등에 이용되고 있다. 이러한 분리막의 특성은 투과도와 선택투과도에 의해 결정되어지는데, 이들은 서로 상반된 경향을 나타낸다. 즉 투과도가 높으면 선택투과도는 낮아지고, 선택투과도가 높으면 투과도는 감소하게 된다. 그러나 이러한 두가지 특성 모두를 높이기 위한 연구가 활발히 진행되고 있는데, 그 연구방향은 새로운 고분자의 합성 및 고분자의 개질, 복합재료의 개발, 액정, 촉진수송법 등으로 나눠질 수 있다. 이중 촉진수송이란 특정한 기체와 가역적 친화력 혹은 흡착력을 갖는 운반체를 액체 혹은 고체막에 분산시켜 원하는 특정 기체만을 선택적으로 수송하는 것을 말한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.21-21
• /
• 1993

고분자 막을 이용한 기체 분리 기술은 에너지 소비의 절감과 높은 분리 효율성 등으로 인해 (1) 수소 회수 및 $H_2/O_2$의 비율저종 (2) $CH_4/CO_2$ 분리 (3) $O_2/N_2$ 분리등에 이용되고 있다. 이러한 분리막의 투과도와 선택투과도를 모두 높이기 위한 연구가 활발히 진행되고 있는데, 그 연구방향은 (1) 새로운 고분자의 합성 및 고분자의 개질 (2) 복합재료의 개발 (3)액정 (4)촉진수송법 등으로 나눠질 수 있다. 이 중 촉진수송(Facilitated Transport)이란 특정한 기체와 가역적 친화력 또는 흡착력을 갖는 운반체(Carrier)를 액체나 고체막에 분산시켜 원하는 특정 기체만을 선택적으로 수송하는 것을 말한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.39-40
• /
• 1992

분리막법이 기체 분리에 응용된후 에너지 소비의 절감, 열안전성 등과 같은 장점들로 인해 수소회수 및 $H_2/CO_2$의 비율조정, $CH_4/CO_2$ 분리, $O_2/N_2$의 분리 등에 이용되고 있다. 이러한 분리막의 특성은 투과도와 선택투과도에 의해 결정되어지는데, 이들은 서로 상반된 경향을 나타낸다. 즉 투과도가 높으면 선택투과도는 낮아지고, 선택투과도가 높으면 투과도는 감소하게 된다. 그러나 이러한 두가지 특성 모두를 높이기 위한 연구가 활발히 진행되고 있는데, 그 연구방향은 새로운 고분자의 합성 및 고분자의 개질, 복합재료의 개발, 액정, 촉진수송법 등으로 나눠질 수 있다. 이중 촉진수송이란 특정한 기체와 가역적 친화력 또는 흡착력을 갖는 운반체를 액체나 고체막에 분산시켜 원하는 특정 기체만을 선택택으로 수송하는 것을 말한다.