• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.25-34
• /
• 2018

The physical properties and unsaturated characteristics of acid sulfate soils were investigated and analyzed. As the results of measuring physical properties of the acid sulfate soils obtained around the Ilkwang mine area, the dry unit weight is $1.246t/m^3$ and this soil is classified into the silty sand (SM) by USCS. Soil Water Characteristics Curves (SWCC) of the drying and wetting paths were measured by the automated SWCC apparatus. Also, Hydraulic Conductivity Functions (HCF) of the drying and wetting paths were estimated by the van Geunchten (1980) model which is the most well-known parameter estimation method. The hydraulic conductivity of acid sulfate soils in the dry path was continuously decreased with increasing the matric suction. However, the hydraulic conductivity in the wetting path was decreased relatively small with increasing matric suction and decreased suddenly just before water entry value of matric suction. Meanwhile, the hysteresis phenomenon was occurred in SWCCs and HCFs during the drying and wetting paths.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.40-46
• /
• 1985

The equilibrium sorptions of C.I. Reactive Blue 19 and C.I. Reactive Blue 19 and C.I. Acid Blue 138 on Silk fibroin were investigated in the range of 50$^{\circ}C$, 70$^{\circ}C$, 90$^{\circ}C$ and to the pH range from 2.0 to 10.5. The results obtained are summarized as follows: 1) The amount of sorption of reactive dye was increased with the decrease of pH in dyeing solution and temperature. The amount of fixation showed the maximum value to pH 8.5 and 70$^{\circ}C$. 2) In acidic region, the sorption behavior of acid dye was similar to that of reactive dye, and Langmuir adsorption constant was increased with the decrease of pH. 3) Langmuir constant of both dyes was decreased with the increase of temperature, while standard affinity was increased. 4) The reaction of both dyes was exothermic and the values of $\Delta$S$^{\circ}$ were positive. 5) It was found that the sorption behavior of dyes against Silk fibroin could be described as Langmuir adsorption and Nernst distribution in lower pH region.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.269-274
• /
• 2013

We are used with the alkaline ion water which an application field does to object for drinking water compare with the alkaline ion water which asked ion acid electrolysis so as to be very different. This is used with sterilization disinfection use by residual chlorine in case of strong acidity according to ph intensity, and in case of middle acidity use by washing and face washing, and mix with meal materials in case of weak acidity widely usable in cooking. Acid ion water generates as we electrolyze water. Chlorine gas and sodium hydroxide etc. was generated at electrolysis process, and we have toward sterilizing power. Derelicts such as chlorine, phosphorus, sulfur etc. are gathered from a negative ion, and we make acid ion water to + electrode direction in electrolysis. We used a diaphragm in order to disconnect too acid water and alkaline water. We implemented so that the acid water which it came down to three kinds of PWM voltage to PWM (pulse width modulation) control, and implementation method of ph intensity change authorized ph intensity between weak acidity to electrode in strong acidity as we used Microprocessor, and intensity was adjusted successively by PWM control was generated.

• The Korean Journal of Ecology
• /
• v.28 no.3
• /
• pp.169-180
• /
• 2005

Nitrogen dioxide concentration was being grown ca. 8% per year although sulphur dioxide concentration was being reduced ca. 10% per year in Seoul from 1996 to 2003. The rainwater was heavily acidic with pH 4.19 to 4.68 in Seoul during 1980 to 1991. Acidity score on the basis of the total anion concentration of rainwater follows the higher in sequence with Seoul(Kwanaksan)(341.5 ${\mu}equiv{\cdot}L^{-1}$), Gwangneung(199.2 ${\mu}equiv{\cdot}L^{-1}$) and whole Korea mean(10.3 ${\mu}equiv{\cdot}L^{-1}$). Rainwaters from 38 sampling sites of 16 countries in the world, on the basis of the acidity score, are classified and designated as five acid rain grades(ARG): the least score is founded in Tana Rata(16.2 ${\mu}equiv{\cdot}L^{-1}$), Malaysia where has the best rain but the greatest founded in Chongquing(541.1 ${\mu}equiv{\cdot}L^{-1}$), China where has the worst rain in the world. Even though acidic deposition decrease with time in the world generally, it is expected to increase in Asia, Africa and Mid-South America.

• Journal of Korea Soil Environment Society
• /
• v.2 no.3
• /
• pp.31-38
• /
• 1997

Temporal and spatial comparisons of acid mine drainage contaminated waters are difficult because of the complex physico-chemical nature of the pollutant. In the present study, an acid mine drainage index has been developed and evaluated for the assessment of surface waters. AMD index is calculated using a modified arithmetic weighted index using seven parameters which are most indicative of AMD contamination, i. e. pH value, sulphate, iron, zinc, aluminum, copper and manganese. Weighting is used to express the relative indicator value of each parameter. The proposed AMD index is used to quantify contamination from acid mine drainage over ten different old mine sites and assess the degree of impact on surface on surface waters. As a result of AMD evaluation, the Sukbong Mine located near the Moonkyung province showed lowest AMD value indicating the worst acid mine drainage quality. In overall, Youngdong mine sites showed higher contaimination compared to the other mine sites including Youngsuh, Choongbu, Suhbu and Nambu area.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.437-443
• /
• 2010

The influence of noxious corrosive gas, which is the product of fossil fuel, and the acidic descent material, which becomes the reason for such reaction, on wax which protects the cultural assets, and the habitat factor were researched. It could be viewed that corrosion occurred rapidly due to the acidic descent material, which have the long staying on the material, rather than harmful corrosive gas. Also, it could be figured out that such corrosion began from whitening phenomenon of coated wax. As the acidity increased, more whitening phenomenon occurred, and eventually, it could be found out that whitening effect began due to the acidic descent material, corrosive gas and various 0.1 M acid solution, which lead to the exposure of internal metal, and corrosion occurred. The wax with the greatest resistance to the acidity due to its least changing aspect seemed to be Renaissance wax, except sulfuric acid.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.265-269
• /
• 2006

This study was to investigate the effect of acidic leachate on the landfill liner system and healing of cracks by using industrial by-products; BFS(Blast Furnace Slag) and FA(Fly Ash). From the results of pH measurement, for OPC(Ordinary Portland Cement) and DM(Dredged Mud) mixtures immersed acidic leachate, the initial pH($4.5{\sim}5.5$) was heavily increased to approximately 10 after 60 days experiment due to the production of 2 mole $OH^-$ which was occurred by hydrolysis of CaO and MgO etc.. Meanwhile, the initial pH of acidic leachate immersed DM mixtures with BFS and FA respectively was lasted for longer period as compared to the comparison. The reason was that production of low Ca C-S-H hydrates which stabilized in acidic liquid. The physical properties(compressive strength, hydraulic conductivity) of DM mixtures added BFS and FA was improved. It was concluded that the dissolution of hydrates was disturbed by high alkalinity of BFS and FA.

• Journal of Ginseng Research
• /
• v.26 no.4
• /
• pp.202-205
• /
• 2002

This study was carried out to investigate the optimum conditions for extraction of acidic polysaccharide from red ginseng marc produced by manufacturing alcoholic and water extract from red ginseng. Extraction efficacy of acidic polysaccharide from dried red ginseng marc was higher than that before drying. The appropriate conditions for the extraction of acidic polysaccharide from red ginseng marc were particle size under 3.35 mm after drying red ginseng marc, 1∼2 hours of extraction time and 2∼3 extraction times, respectively. The amount of acidic polysaccharide in water extract from red ginseng marc treated with $\alpha$-amylase and cellulase increased about 20∼50%. From the above resuts, we suggest that red ginseng marc produced by manufacturing alcoholic and water extract of red ginseng has higher potencies in the utilization of waste materials.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.5-11
• /
• 2012

Acid mine drainage (AMD) is one of the most severe environmental problem that results from the oxidation of pyrite $(FeS_2)$ and various other metal sulfides. In this study, the influence of microorganism was tested on the process where AMD was released and the method to inhibit AMD generated by microorganisms at abandoned mine area. The activity and growth rate of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans, common microorganisms affecting AMD occurrence, were measured. Chlorine dioxide $(ClO_2)$, NaCl, or surfactant (ASOR-770) was used as an inhibitor for working on activity and growth of microorganism. Among the three inhibitors, 10ppm of chlorine dioxide was the most effective inhibitor for AMD control due to the reduced the activity and growth of microorganisms by 20%.

• International Area Studies Review
• /
• v.12 no.2
• /
• pp.99-123
• /
• 2008

In this paper, technology gap between Korea's manufacturing industries compared to technology frontier countries was estimated in order to take into account Korea's status as a technology follower country. Then by using this measure the role of technology gap was investigated in explaining total factor productivity growth of the Korean manufacturing at industry level. The main empirical findings are as follows: First, the conventional factors that were emphasized in the previous literature such as R&D intensity, trade openness and human capital play important role in explaining the growth rate of Korea's total factor productivity. Second, the larger the technology gap between Korea and technology leader country (and the faster the technology growth rate in the leader country), the higher the growth rate of total factor productivity in Korea as well. Third when the technology gap is large, the most efficient way of absorbing higher technology from frontier country seems to be the international trade channel rather than R&D or human capital accumulation.