• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.395-400
• /
• 2004

The effects of compositions of binders on the rheological properties of mixtures and the preparation conditions on the formation of defects and the debinding characteristics of compacts for the injection molding of ceramic powders (65 wt% aluminaㆍ35 wt% feldspar) were studied. Ceramic powders were coated with 2 wt% of stearic acid and then mixed with 15, 20, and 25 wt% of Paraffin Wax (PW) and High Density Polyethylene (HDPE) as binders at $160^{\circ}C$ for 2 h. Rheological properties were investigated by using capillary rheometer. Apparent viscosities of mixtures were 80∼300 Paㆍs at 1,000$s^{-1}$ of a shear rate, it was good for the injection molding and depending on the compositions of binders. Short shot was formed at 15H5P5 (the ratio of HDPE : PW=5 : 5 in 15 wt% of binders) compacts without injection pressures and any noticeable defects were not formed at 45 kgf/$cm^{2}$ in 20H5P5 compacts. PW and HDPE were removed by the solvent extraction and thermal debinding method. Thermal debinding of HDPE at $450^{\circ}C$ for 5 h, which followed the extraction of PW was using n-heptane solvent at $70^{\circ}C$ for 5 h. Continuous pores in compacts, which facilitate the removal of HDPE by the thermal debinding, were found to form in the compacts when PW was removed by the solvent extraction. The optimum composition of binder at which binder was removed by thermal debinding without defects while maintaining the compact strength was 20H5P5. Bulk density, porosity and 3-point bending strength of 20H5P5 compact sintered at 1,30$0^{\circ}C$ for 5 h were 2.8, < 3%, and 2,400 kgf/$cm^{2}$, respectively, and can be used as a structural materials.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.147-150
• /
• 2002

사출성형 공정의 컴퓨터 시뮬레이션(CAE)은 짧은 시간에 저 비용으로 여러 설계 및 재료와 공정조건의 조합을 시험할 수 있는 수단이다. 실제 금형을 가공하고 시제품을 생산하기 전에 미리 해석을 수행하여 봄으로써 설계의 오류 및 부적절한 공정조건의 설정을 방지할 수 있다. 컴퓨터 시뮬레이션은 공정조건에 의한 사출성형을 가능하게 해 준다. 즉, 수지의 거동, 냉각과정, 압력거동 등을 컴퓨터 화면을 통해 볼 수 있으며 이를 기초한 성형품의 예상문제점을 파악할 수 있다. 본 논문에서는 CAE기술을 응용한 Back Light Panel의 설계에 대해 논의하고자 한다.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.125-128
• /
• 2003

본 연구는 현재 시판되고 있는 Papst사의 4100 mod디을 대상으로 축방향 송풍기의 사출성형에 대해 MoldFlow 프로그램을 사용하여 제품에 대한 최적의 게이트 위치를 조사하였고 이를 바탕으로 2매 구성금형과 3매 구성금형에 따른 게이트를 설정하여 사출압력, 온도의 변화, 충전 시간 둥을 비교하여 경제성을 고려한 최적의 게이트 위치를 결정하였다. 다수 뽑기 금형에서의 제품 성형에 있어 중요한 변수가 되는 유동주입시스템에서 러너의 크기 변화에 따른 유동선단의 흐름 및 압력과 온도의 변화를 살펴보았고 이러한 시뮬레이션을 통해 시행오차를 최소화 하여 생산비 절감과 품질 향상을 위한 설계를 구현하고자 시도하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4392-4397
• /
• 2012

In this study, we used the commercial package (Unigraphics) to construct a junction box cable car when laser plastic parts have been processed using urethane resin(TSR-755) as a starting mold material. After construction, we carried out the filing, packing, cooling, and deforming analyzation using Injection Molding Analysis (Simpoe-Mold) to determine the gate positioning and automatic cooling cycle through the examination. The results show that inserting into the injection mold after processing ceramic has reduced the time of thermal conductivity of molding and cooling; and quick selection of gates and cooling lines could possibly cause an improvement of productivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.702-706
• /
• 2009

The urethane based on prototype mold is very useful for making prototype. Especially, the method of stereolithography mold was turned out to be rapid and accurate 3-dimensional modeling data. Urethane resin (TSR-755) has heat resistant and is good for make hundreds of prototypes. In this study, we compared with various designed cooling channel and analyzed of cooling effect and deformation using commercial code Simpoe-Mold for injection mold. As a result, efficiently arranged cooling channel could make 19% of shrinkage to reduce and 46% cooling time to reduce.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.193-198
• /
• 2014

Lens and DVD require high quality of optical property. Conventional injection molded products contain high residual stress and this invokes birefringence since high cavity pressure and high temperature variation are involved in a molding process. Thus these products are often molded by injection compression molding in order to minimize the residual stress through reducing cavity pressure and uniform cavity pressure. In this study, molding parameters affecting molding quality such as property uniformity in injection compression molding were investigated through experiment. Molding quality deviations among the cavities in multi-cavity mold were also studied. Transparent resins, PC and PS were used in this study. Compression gap, compression speed, compression force, and compression delay time for processing variables in injection compression molding were applied in experiment. Compression force, compression delay time, and compression gap significantly affected the optical property of product. The degree of influence of process variable on the product quality was different in different resins. This implies that the optimal operational conditions in injection compression molding existed for each resin according to flow property.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.544-548
• /
• 2005

The objective of this study was to determine the effect of die temperature and dimension on extraction pattern, extract yield, and crude saponin content of extruded white ginseng. The extrusion variables were die temperature $(110\;and\;120^{\circ}C)$ and die dimension (3 holes with 1.0 mm, 2 holes with 2.0 mm, and 1 hole with 3.0 mm diameter). The browness and redness were indicator of active components in ginseng extract. Both were used to evaluate the effect of die temperature and die dimension on release pattern and release rate constant. Browness and redness of extract achieved its lowest value at die temperature $110^{\circ}C$ and 2 holes with 2.0 mm diameter, indicating the lowest extraction rate constant. Extract yield highly increased by extrusion treatment. Extract yield and crude saponin content were the highest at die temperature $120^{\circ}C$ and 1 hole with 3.0 mm diameter. In conclusion, extrusion process has contributed significantly in improvement of release rate of its active components.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.533-536
• /
• 2011

기어는 중요한 핵심 기계요소 중 하나로서 기계적 물성이 강화된 엔지니어링 플라스틱의 개발과 제품의 성능 향상 및 소형화, 경량화, 저소음화 등의 소비자 요구를 만족시키기 위한 노력에 편승하여 정밀도가 높은 플라스틱 기어에 대한 생산 요구가 증대되고 있는 실정이다. 본 논문에서는 시력 측정 장치인 자동굴절검사기용 디스크 기어에 대하여 변형을 최소화하기 위한 성형조건 최적화를 수행하였다. 사출 공정의 주요 공정변수를 사출온도, 충진시간과 보압압력, 금형온도로 정하고 다구치 방법에 의해 성형 해석으로 예측된 변형량을 분석한 결과 사출온도와 보압압력이 원판형 기어의 Z방향 변형에 가장 큰 영향을 미치는 것을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1494-1499
• /
• 2008

Plastic materials are utilized to the most important material of automobile interior-parts due to special characteristics that it is light, good strength and do not transmute quality even if pass long time. This study presented a preliminary analysis of fill time, weld line, air trap etc. for the plastic injection molding process of automobile gearbox cover through simulation using Moldflow.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.224-227
• /
• 2004

본 연구는 플라스틱 사출 금형 견적 산출 전문가 시스템에 관한 내용이다. 일반적으로 경험에 의한 견적 산출은 프라스틱 사출 금형 제조 회사의 경험이 많은 엔지니어가 직접 작성하게 된다. 이렇게 되면, 시간은 많이 소요되지 않지만, 객관성과 과학성이 결여된 견적이 산출된다. 때때로, 고객과 제조회사 간의 분쟁이 발생하게 되는 원인이 되기도 한다. 이러한 문제를 극복하기 위해, 본 연구로 개발된 시스템이 대안이 될 것이다. 윈도우 환경의 Visual Basic과 SQL 데이터 베이스를 사용한다. 이 시스템에서 얻어진 결과는 제조 현장에서 설계들에게 효과적인 지침이 될 것이다.