• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.31-41
• /
• 2005

In order to carry out aerial photogrammetry using GPS/INS, it is necessary to apply exterior orientation parameters, obtained while making a photo, to the editing process. It should be noted that the verification process of aerial mapping result is the most crucial process at the GPS/INS based digital photogrammetry. To this end, this study has compared the mapping result by the ways of AT results, plotter, and orientation, which is from basis of the Analytical raw map produced by the existing AT results. When comparing the horizontal and vertical accuracy of the analytical mapping with that of digital restitution, it could be found that the latter is more accurate than that of the former. In addition, it was reveled that the horizontal error was bigger than that of vertical one. Even though the accuracy of the GPS/INS based AT Direct orientation was three times poorer than the of indirect one, it was recognized that the photogrammetry process was effectively performed in the application of scale 1:5000 mapping with satisfying the allowance errors.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.201-210
• /
• 2019

This paper proposes the AMCS(Agricultural Machine Control System that distinguishes farms using satellite photos or drone photos of farms and controls the self-driving and operation of farm drones and tractors. The AMCS consists of the LSM(Local Server Module) which separates farm boundaries from sensor data and video image of drones and tractors, reads remote control commands from the main server, and then delivers remote control commands within the management area through the link with drones and tractor sprinklers and the PSM that sets a path for drones and tractors to move from the farm to the farm and to handle work at low cost and high efficiency inside the farm. As a result of AMCS performance analysis proposed in this paper, the PSM showed a performance improvement of about 100% over Dijkstra algorithm when setting the path from external starting point to the farm and a higher working efficiency about 13% than the existing path when setting the path inside the farm. Therefore, the PSM can control tractors and drones more efficiently than conventional methods.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.330-341
• /
• 2018

In recent years, a number of Chinese artists are interested in 'Chinese-style'. 'Chinese-style' can be understood as an art form in which Chinese elements are combined with modernized sensibilities. This paper analyzed how Chinese traditional elements can be effectively implemented in fashion photography, focusing on Chen Man, a leading fashion photographer in China. Our research shows that Chen Man looks to the traditions and history of China to inspire her modern work, which makes her unique as a Chinese fashion photographer. She tried not to repetitively express typical images of Chinese elements but to visualize the symbolic meaning of traditional elements as new images of modern China. Through this practice, she were able to effectively communicate the images of products and brands promoted in fashion photos. Furthermore, her works are being recognized by not only the fashion industry but also the international art elite as they contribute to building and promoting Chinese fashion identity. Research on Chen Man's work is significant in providing a new way for 'Chinese-style' fashion photographers to reinterpret Chinese traditional elements without following Chinese tradition.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.377-382
• /
• 2021

In order to advance forest resource management, it is necessary to solve problems such as the aging of forest-related industry workers and the field investigation system centered on manpower. Therefore, in this study, the trend of establishment and utilization of overseas forest geospatial information applied with the latest technology for scientific forest resource management was investigated to identify the domestic application plan. Overseas, photogrammetry and LiDAR technologies were being used to construct and utilize forest geospatial information. In the case of photogrammetry, it was used to measure the volume of vegetation, diameter, and tree height. And LiDAR technology has been applied to the measurement of diameter, and tree height. Through the analysis of overseas cases, it was identified how to construct forest geospatial information using photogrammetry and LiDAR, and it was found that LiDAR showed higher accuracy than photogrammetry. In the future, if the construction of forest geospatial information using various LiDAR sensors are performed and the accuracy and work efficiency are analyzed, it will be possible to present the possibility of using new technologies in the construction of forest geospatial information in Korea.

• The Korean Journal of Archival Studies
• /
• no.30
• /
• pp.125-174
• /
• 2011

Railway Station in Korea built for purpose to plunder resource and invade China 19 and 20 century early, It functioned as main transportation and important role in local history. However, Since the late 1990s, Railway Station in Korea is facing major changes due to Railroad Improvement and Restructuring plan. Photography is useful way to represent memory and local history about railway station, but Photography Documentation on railroad station were not discussed until now due to indifference of the KORAIL and peculiarities of national security facilities for a long time. This study suggest what is document activities and facilities of railway station, use value analysis about railway station's value firstly. next, this study set each documentation area with value analysis for a basis and present concrete example. finally, this study adapt documentation area and detail to classification scheme and apply activities and facilities of supplement or revision to classification scheme.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.549-557
• /
• 2022

Tunnel face mapping involves the determination of rock discontinuities or weak rock conditions where extra support might be required. In this study, we investigated the application of Lidar scanning and photogrammetry to quantitatively characterize discontinuities of the rock mass on the tunnel face during excavation. The 3D models of tunnel faces generated by using these methods enable accurate and automatic discontinuity measurement to overcome the limitations of manual mapping. The results of this study show that both photogrammetry and Lidar can be used to reconstruct the 3D model of the tunnel face, although the photogrammetric 3D model is less detailed than its counterpart produced by Lidar. Given acceptable accuracy and cost-effectiveness, photogrammetry can be a fast, reliable, and low-cost alternative to Lidar for acquiring 3D models and determining rock discontinuities on tunnel faces.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.771-779
• /
• 2009

Digital topographical maps used for GIS DB are mainly produced by the traditional way of analogue aerial photogrammetry. Therefore, analogue photos are only available for digital mapping after preprocessing such as film developing, printing and scanning. However, digital aerial camera is able to get digital image directly without preprocessing and thus the performance and efficiency of photogrammetry are extremely increased. This study aims to investigate geometric stability of digital aerial frame camera DMC (Digital Modular Camera). In order to verify the geometric stability of digital aerial camera DMC, some different block conditions with and without cross strips, GPS/INS data and variation of GCPs are introduced in the block adjustment. The accuracy results of every block condition were compared each other by computation of residuals of exterior orientation (EO) parameters. Results of study shows that the geometric stability of the block adjustment with cross strips is increased about 30% against without cross strips. The accuracy of EO parameters of block adjustment with cross strips is also increased about 2cm for X-coordinate, 3cm for Y-coordinate, 3cm for Z-coordinate, and 6" for omega, 4" for phi and 3" for kappa.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.17-25
• /
• 1996

The development of still video CCD cameras has simplified dramatically the digital imaging process. Still video cameras have flexibility that allows digital image acquisition and on-board image storage without being connected to a computer. The objective of this paper is to evaluate the performance of digital close-range photogrammetric system using the still video camera for dimensional inspection and structural monitoring being required in various industries. Some sub-pixel measurement techniques, which is indispensable for digital image measurement, were suggested. The author carried out the self-calibration of a high resolution DCS420 still video camera and then test application of a structure. The self-calibrating bundle adjustments resulted in object space accuracies which exceed 1 :46,000. It is ascertained that this digital close-range photogrammetric system has high accuracy potential and task effectiveness for industrial applications.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.321-326
• /
• 2004

Many researchers have been studied texturing the 3D face model with front and side pictures of ordinary person. It is very important to exactly detect the psition of eyes, nose, mouth of a human from the side pictures. Previous results first found the position of eye, nose, or mouth and then extract the other face components using their positional correlation. The detection results greatly depend on the correct extraction of the neck from the images. Therefore, we present a new algorithm that remove the neck completely and thus improve the detection rates of face components. To do this, we will use the RGB values and its differences.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.102-109
• /
• 2013

The purpose of this study is to express imagination which is not limited to the description of the facts and reproduce the photos as a media to explore the new possibilities for creative expression and the experience of the day-to-day operations for the implementation of the scheme of art genre. The art work for this study using digital images in Autodesk Combustion Workspace as the upper and lower layers were synthesized using the Transfer Mode feature. This study proposed a new photomontage production model, and challenged for the Possibility of a variety of visual representations of media art. Especially the production presents in this study can be applied to various video.