• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.301-306
• /
• 2011

The paper presents an analysis of the heating cycle and discusses a desalination cycle that uses lowtemperature seawater. The basic heating cycle model is the heat pump cycle, and seawater desalination is usually performed by the indirect freezing desalination method. The low temperature of the seawater (below $5^{\circ}C$) acts as the heat source of the evaporator. R-134a, R-1234yf, R-600a are used as working fluids. In the 2-stage compression cycle, the compressor's work decreased by about 15.6% from that in the 1-stage compression cycle. Further, the COP in the 2-stage cycle was 17.6% higher than that in the 1-stage cycle. In the indirect desalination cycle, the energy per unit fresh water productivity in the 2-stage cycle was 19.8% lower than that in the 1-stage cycle.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.301
• /
• pp.68-73
• /
• 2002

미쓰비시(삼릉)전기는 1999년 5월치바현 이치가와시 동빈에$''$특정가정용기기재상품화법(통칭 : 가전리사이클법)$''$에 대응하기 위하여 일본국내 최초의 전기제품 리사이클 플랜트를 가동시켰다. 이 플랜트에서는 종합전기메이커로서의 특징을 살려 연소를 수반하지 않는 철저한 머티어리얼 리사이클, 물을 쓰지 않는 완전건식에 의한 소재(素材)의 분리$\cdot$분별(分別)을 실현하였다. 최대의 특징은 수(手)작업에 의한 부분분해와 기계분해(파쇄에 의한 소재분리)를, 리사이클률, 경제성, 환경부하성의 3가지 관점에서 조화를 시키고 있는 점이다. 본고에서는 리사이클 플랜트의 개요를 소개하고 리사이클률 향상과 리사이클 처리비용 저감을 위해 대처해 온 다음의 3개 항목에 대하여 기술한다. (1) 플라스틱찌꺼기(殘材) 리사이클설비의 개발 주파쇄분리(主破碎分離) 프로세스에서 배출되는 금속과 염화비닐을 포함한 플라스틱찌꺼기를 처리하여, 플라스틱을 고로환원재(高爐還元材)로서 유효 활용할 수 있도록 하였다. (2)효율적인 물류(物流)레이아웃 및 수해체방식(手解體方式)의 설계 공장내의 폐제품(廢製品)$\cdot$분별물(分別物)에 대한 보관장소, 반송수단$\cdot$경로를 최적 설계하여 처리비용을 요하는 수해체 작업을 효율적으로 할 수 있도록 업무흐름을 설계하였다. (3)리사이클공장 관리시스템의 구축 공장관리의 효율화와 배출자(排出者)에 대한 리사이클정보가 분명하게 나타날 수 있게 하기 위하여 리사이클공장관리시스템을 개발하여 도입하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.684-687
• /
• 2010

본 논문은 복합사이클 발전플랜트의 폐열회수 보일러 최적운전 및 최적설계에 대한 새로운 접근 방법을 도출하기 위해 폐열회수 보일러에서 발생되는 증기로 증기터빈을 구동하는 하부사이클 효율을 검토하였다. 열역학 제1법칙 해석을 통해 하부사이클 에너지 평형을 검토하였고, 열역학 제2법칙을 통해 엑서지 평형을 검토하였다. 하부사이클 효율이 최대가 되는 폐열회수 보일러를 설계하기 위해서는 열역학 제1법칙을 해석할 경우 하부사이클 전체를 해석하여야 함을 알 수 있다. 하지만, 열역학 제2법칙을 통한 엑서지 해석을 행할 경우 하부사이클 효율이 최대가 되는 증발온도와 폐여회수 보일러에서 소모되는 엑서지가 최소가 되는 점이 일치함을 알 수 있었다. 따라서 본 논문을 통해 폐열회수 보일러에서 소모되는 엑서지 해석을 통해 하부사이클 효율이 최대가 되는 폐열회수 보일러 최적화가 가능함을 알 수 있다.

• Plant Journal
• /
• v.15 no.2
• /
• pp.42-45
• /
• 2019

The molten carbonate fuel cell has a high temperature of waste heat and can constitute a bottoming cycle to increase the efficiency. Previous study used a bottoming cycle as steam turbine cycle. In this study, we are going to replace the bottoming cycle with a supercritical carbon dioxide power cycle. The system power was compared to consider replacing the bottoming cycle. As a result, the power of the supercritical carbon dioxide power cycle at the present development stage is lower than that of the steam turbine cycle, but theoretically, the power can be larger than the steam turbine cycle. If the supercritical carbon dioxide power cycle improves the isentropic efficiency of the turbine by 89%, the isentropic efficiency of the compressor by 83%, and the effectiveness of the recuperator by 0.9, the power can be same to the steam turbine cycle.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.71-76
• /
• 2011

Recently, container terminal managers make an experiment on the double cycle and dual cycle operation, which ship loading and unloading were carried out simultaneously, for increasing the productivity of quay side. If, however, we make an experiment on dual cycle operation in a real job site, the efficiency is poor up to terminal operation method as YTs(Yard Tractors)' allocation method, QCs(Quay Cranes)' working speed, and position of export containers. Especially, using the existing yard operation method, it is difficult to support to dual and double cycle operation. Therefore, this paper examine more efficient terminal operation method, when terminal uses dual cycle operation. We developed a simulation model using simulation analysis software, Arena.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.434-437
• /
• 2011

본 논문에서는 H.264/AVC 복호기의 성능을 향상시키기 위해 병렬 역양자화 구조와 역변환 구조를 제안한다. 제안하는 역양자화 구조는 공통 연산기를 사용하여 계산 복잡도를 감소시키고, 4개의 공통연산기를 사용하여 역양자화 수행 사이클 수를 1 사이클로 감소시킨다. 제안하는 역변환 구조는 4개의 변환 연산기를 사용하여 역변환 연산을 수행하는데 2 사이클이 소요된다. 또한 제안하는 구조는 역양자화 연산과 수평 역변환 연산을 동시에 수행하는 병렬 구조를 채택하여 역양자화 및 역변환 수행 사이클 수를 2 사이클로 감소시킨다. 제안하는 구조를 Magnachip 0.18um CMOS 공정 라이브러리를 이용하여 합성한 결과 1.5MHz의 동작 주파수에서 게이트 수는 14,173이고, 표준 참조 소프트웨어 JM 9.4에서 추출한 데이터를 이용하여 성능을 측정한 결과 제안하는 구조의 수행 사이클 수가 기존 구조 대비 38.74% 향상되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.768-773
• /
• 2012

This study was performed to find out the possibility that hot waste water from a thermoelectric power plant can be applied to Organic Rankine Cycle (ORC) by comparing the performance characteristics for use of the ocean surface water ($25^{\circ}C$) and hot waste water ($35^{\circ}C$) as a secondary fluid. The parameters considered in this study are four; superheating temperature, subcooling temperature, turbine efficiency, and pump efficiency. Main results of this study are summarized as follows : Overall efficiency of applying hot waste water to ORC is 87% higher than that of surface water. Thus it could be confirmed that hot waste water of the thermoelectric power plant can be applied to ORC.

• Journal of the Korean Institute of Gas
• /
• v.3 no.1
• /
• pp.14-20
• /
• 1999

This study describes the results of Coefficient of Performance(COP) analysis by cycle simulation for two types of absorption-compression hybrid cycle using the Water/Lithium Bromide solution pair. These types are basic hybrid systems introducing a mechanical compression process into the refrigerant vapor phase of the single effect absorption cycle. In absorption-compression hybrid cycles, coefficient of performance is improved compared with absorption cycle. Hybrid cycle Type 2 is considered as a key technology to support energy utilization system, given its capability of utilizing waste heat to drive system with a high level of efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.881-889
• /
• 2015

Ocean thermal energy conversion is an organic Rankine cycle that generates power using the temperature difference between surface water and deep water. This study analyzes the thermodynamic efficiency of the cycle, which strongly depends on the working fluid and the cycle configuration. Cycles studied included the classical simple Rankine cycle, Rankine cycles with an open feedwater heater and an integrated regenerator, as well as the Kalina cycle. Nine kinds of simple refrigerants and three kinds of mixed refrigerants were investigated as the working fluids in this study. Pinch-point analysis that set a constant pinch-point temperature difference was applied in the performance analysis of the cycle. Results showed that thermodynamic efficiency was best when RE245fa2 was used as the working fluid with the simple Rankine cycle, the Rankine cycles with an open feedwater heater and an integrated regenerator, and when the mixing ratio of $NH_3/H_2O$ was 0.9:0.1 in the Kalina cycle. If the Rankine cycles with an open feedwater heater, an integrated regenerator, and the Kalina cycle were used for ocean thermal energy conversion, efficiency increases could be expected to be approximately 2.0%, 1.0%, and 10.0%, respectively, compared to the simple Rankine cycle.

• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.253-260
• /
• 2006

In this paper, we analyze the Hamiltonian property of Pyramid graphs. We prove that it is always possible to construct a Hamiltonian cycle of length $(4^N-1)/3$ by applying the proposed algorithm to construct series of cycle expansion operations into two adjacent cycles in the Pyramid graph of height N.