• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.82-91
• /
• 2002

방파제에 대한 신뢰성 설계 방법은 유럽과 일본을 중심으로1980년대 중반 이후로 발전되어 왔다. 유럽에서는 van der Meer(1988a)가 방파제 피복재의 설계에 확률론적인 방법을 도입하였고, Burcharth(1991)는 사석방파제에 대하여 부분안전계수(partial safety factor)를 이용한 신뢰성 설계 방법을 제시하였다 최근 Burcharth and Sørensen(1999)은 PIANC (Permanent International Association of Navigation Congress) Working Groups의 결과를 요약하여 사석방파제와 직립방파제에 대한 부분안전계수들을 확립하였다. (중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.413-420
• /
• 2008

Wave force is an important factor which gives a direct affect to stability of the rubble mound breakwater. Particularly wave force has been considered as the main cause of displacement for replaced rubble mound breakwater which permits a little displacement to some degree. But the effect on displacement by wave force has not been considered and reflected in design. Therefore in this study, we compared numerical analysis displacement with field measured displacement so that the effect of wave force on displacement can be reflected in design. Result of the numerical analysis displacement was well consistent with field measured displacement data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.108-111
• /
• 2012

최근에 태풍 매미 등 이상 기후로 인한 기상이변이 빈번히 발생함에 따라 그에 대한 대처방안을 모색하기 위해 2005년 해양수산부에서는 지역 및 해역별 특성을 분석하여 종전 설계기준을 강화하였다. 하지만, 기존에 설계된 항만 구조물의 마루높이 및 피복재 중량 등이 새로 개정된 설계기준에 미치지 못하는 등 안전성에 대한 문제가 발생하고 있으며, 이러한 문제점을 개선하기 위해 기존 방파제를 보강하는 여러 방식이 제안되고 있다. 그 중 부유식방파제는 해수의 소통을 방해하지 않는 친환경적인 구조물로써, 연약지반에 시공이 가능하고 시공 시 오탁이 적게 발생하여 시공이 편하다는 장점을 가지고 있다. 또한 구조물의 해체 및 보강시 건설폐기물을 발생시키지 않는 친환경적인 구조물이기 때문에 새로운 방식의 대체 외곽항만구조물로 관심을 받고 있다. 이에, 본 연구에서는 사석경사제 전면에 부유식구조물을 설치하여 방파제 보강하는 방안을 제시하고자, 부유식구조물을 통과한 파랑이 사석경사제와 만나 발생하는 처오름높이를 분석하였다. 본 수치모의에서는 유체의 점성 및 난류특성을 포함하고 있는 Navier-Stokes 방정식을 그대로 해석하는 2차원 수치파동수조(CADMAS-SURF)를 이용하여 수치 모의을 수행하였다. 부유식구조물은 불투수성구조물로 수면에 고정시키는 방식을 적용하여 사석경사제의 전면에 설치하였으며, 고정된 부유식구조물의 흘수심을 변화시켜 사석경사제에서의 처오름높이를 산정하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.343-350
• /
• 2000

This study deals with the Definition of the Earth-volume quantity and direction of throwing down stones (Q.R.R) into the Breakwater using Real-time DGPS & Echo-Sounding method. Generally, the buoy in the center line of Breakwater has been set up so as to throw down stones in the correct area. After throwing stones down there, surveyors have been surveying the depth and direction of stones with rod and sounding lead. The method, however, is not effective because of long time and a lot of human power, in addition it is incorrect. This paper has studied on the solution of those problems using Real-time DGPS & Echo-Sounding data to calculate the earth-volume quantity, direction and depth of throwing down stones. This paper says the effective and economical methods using Real-time DGPS & Echo-Sounding data there.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.13-27
• /
• 2018

To study how stable the rubble mound breakwaters are, one can look to the research of wave induced seepage flow through the pores of the rubble mound. Seepage flow is generally generated by the difference between the water level around the breakwater during a typhoon. The existing stability analysis method of the rubble mound is the static analysis which simply considers the force equilibrium taking into account the horizontal force acting on the concrete block induced by a wave (calculated by Goda equation) and the vertical force induced by the weight inclusive of the concrete block, quarry run, filter, and armor layer above the slipping plane. However, this static method does not consider the wave-induced seepage flow in the rubble mound. Such seepage may decrease the stability of the rubble mound. The stability of a rubble mound breakwater under the action of seepage was studied based on the results of CFD software (OpenFOAM) and Limit Equilibrium Method (GeoStudio). The numerical analysis result showed that the seepage flow decreased the stability of the rubble mound breakwaters. The results of the numerical analyses also revealed the stability of the rubble mound was varied with time. Especially, the most critical state happened at the condition of overtopping the concrete block, acting strong uplift pressure raising along side and underneath the concrete block, and generating high pore pressure inside rubble mound due to seepage flow. Therefore, it may be necessary to conduct a dynamic analysis considering the effect of wave-induce seepage flow together with the static analysis.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.86.1-86.1
• /
• 2009

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.4
• /
• pp.319-326
• /
• 2001

This paper reports on a recent investigation to determine criteria for the design of rubble-mound breakwaters. Existing theories and empirica] equations have been carefully reviewed and a new relation is proposed for the determination of optimum weight of armor unit of rubble-mound breakwater. A new parameter is introduced into the new semi-theoretical equation, which is closely related with the surface particle velocity of wave motion. The laboratory data reported by van der Meer(1987) were used for the determination of proper relations of empiricat parameters introduced into the new empirical equation.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.3
• /
• pp.40-45
• /
• 2002

In this study, the effects on hydraulic characteristics are discussed as the permeable underlayer thickness of the rubble mound structure changes. A series of hydraulic experiments were performed and wave run-up, reflection and set-up were investigated. Result indicated that wave run-down was affected by the water out from the permeable underlayer during down-rush. As the thickness increased, relative wave run-up decreased.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.187-197
• /
• 2007

Experimental study for a submerged structure was conducted to protect coastal structures and shorelines. The rectangular submerged structure known as the most efficient shape among various submerged structures in the literature was fabricated at the nose of a rubble mound breakwater. The reflection coefficients and the run-up heights along the slope of a breakwater were measured for different significant wave heights and periods. It is found in this study that the reflection coefficient is affected more relatively by the significant wave period than the significant wave height and the run-up heights are reduced approximately 28% in terms of ${^{RU}}_{2%}$ and 26% in terms of ${^{RU}}_{33%}$, respectively, by the installation of a submerged structure inducing the interception and breaking of waves.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.139-148
• /
• 2001

Phenomena induced by waves, such as overtopping, sediment transport, vibration/fluctuation and destruction of structures are highly influenced by the directionality of wave propagation. These phenomena are often dominated by non-linearity, and so hydraulic model experiments are widely adopted for stability analysis rather than numerical modeling, Thus, stability ofrubblc mound breakwaters(RMB) due to wavc directionality was experimentally investigated in this study. The incident wave angle $30^{\circ}$ was found more risky on the damage rate of RMB under directional regular waves, and the incident wave angle $40^{\circ}$ was found relatively risky under directional irregular waves. These results clarified the wave directionality effect on the stability ofRMB, These facts were found correspondent to the occurrence of the peak between $20^{\circ}$-$40^{\circ}$ with the directional frequency distribution of lIlO maximum water particle velocity.