• The Journal of Engineering Geology
• /
• v.13 no.4
• /
• pp.491-496
• /
• 2003

본 기술은 암반사면 보강공법에서 철근보강재인 네일(Nail)에 원추형콘(철근 규격에 따라 기울기 $19~23^{\circ}$, 높이 40~45mm, 아랫변 65~70mm)을 일정한 간격으로 다수 장착하여 그라우트재와 원 지반까지 방사입체형으로 힘을 미치게 하는 암반사면 보강공법이다. 본 신기술 공법은 네일링 공사 시 원추형 콘을 장착, 삽입함으로서 부착력과 인발력을 증가시켜 비탈면 보강공사 시에 안전성을 높인 공법이다. 따라서 네일링공법을 사면붕괴 방지공사에 적극 활용할 수 있으므로 네일링 공법의 사용을 활성화 하며, 지진이나 지반변형 등 외력에 의한 사면붕괴를 사전에 방지할 수 있어 사면재해를 미연에 방지하는 효과가 있다. 또한 현재가지 네일링공법은 인발톤수가 적고 네일에 대한 신빙성 결여로 아주 적은 인발톤수를 필요로 하는 현장이외에는 사용을 기피하는 일이 많았다. 그러나 본 원추형 콘네일 공법은 어스앙카, 록앵커, 보강토공법, 지지말뚝공법, 옹벽 등에 대한 대체공법으로 이용할 수 있는 여건이 충족됨으로 사면보강재로서의 사용 확산이 기대된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.159-162
• /
• 2007

상지대학교 #낙석 및 산사태 방재연구단#에서는 #건설교통부 지역기술혁신사업#의 일환으로 사계절 낙석과 산사태 위험에 노출되어 있는 강원지역의 주요 도로 사면에 대한 재해를 저감하기 위하여 통합 사면관리기술, 광역산사태 저감기술 및 사면 안정성중대기술을 개발하고 있다. 본 논문은 강원지역의 최근 5년간 시공된 주요 사면별 178종의 애트리뷰트들의 정보를 Database화하고 이를 활용하여 시공 예정인 특정 사면과 환경조건이 유사한 사면에 적용하였던 공법들과 이에 따른 유지보수 내역과 안정성 등의 정보를 제공하는 사면정보 검색시스템의 설계와 구현에 관한 것이다. 검색의 효율성을 위해 18종의 중요 애트리뷰트들을 선정하고, 이들을 선택형과 기재형으로 분류한 후, 공법들간의 유사도(일치도)를 측정하는 방안을 도입하였다.

• Korean Journal of Environment and Ecology
• /
• v.22 no.3
• /
• pp.268-279
• /
• 2008

This study is aimed at typifying the crossing structure and inquiring into the characteristics of vegetation distribution by type targeting Dorimcheon(stream), Banghakcheon(stream), Seongnaecheon(stream) and some sections of Yangjaecheon(stream) in Seoul through the establishment of basic data for restoring vegetation in urban stream. This research classified the crossing structure into 56 slope types and 31 vertical types in combination with the three items, such as bank slope(vertical style, slope style) of bank, absence or presence of waterside, and revetment structure. This research derived nine slope types including SB1 (revetment of low water level-revetment with vegetation, and revetment of high water level-nature riverside) including SG5(revetment of low water-concrete, and revetment of high water level-riprap work), and three vertical types, such as VH4(bank revetment-wet masonry), and VH7(bank revetment - concrete )from the target survey areas. Among these, both revetment of low water level and high water level were found to be distributed on the longest section as the type of SG7 and VG7 structured in concrete. As a result of inquiry and analysis of micro topography structure and vegetation structure of eight major types, this research could find out the influence of crossing structure on plant vegetation according to the characteristic by typified item, but there appeared no distinct characteristic of vegetation distribution by crossing structure.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.611-619
• /
• 2007

This study was carried out to analyze the landslide characteristics and forest environment factors on the landslide area of 7 national parks in korea. The results obtained from this study were summarized as follows; The total number of landslide occurrence was 44 areas. The average length of the landslides scar was 152 m, average width was 17 m. And the average area was $2,818m^2$. The factors influencing landslides were highly occurred in Metamorphic rock, mixed forest type. And also, $30{\sim}35^{\circ}$ in slope gradient, NE in slope aspect, slope higher than 1,000 m, concave (凹) type in vertical and cross slope, 0 ordered stream. The main factors affecting landslide area in stepwise regression analysis were sheet type in landslided shape, NE in slope aspect, 2 ordered stream, SE in slope aspect, slope gradient and complex slope in cross slope type in order of regression coefficient.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.3
• /
• pp.21-28
• /
• 2009

As the natural aggregates such as sand and clay are getting exhausted, the quantity of utilizing geosynthetics is being increased in the solid waste landfill. Especially, the waste landfills have been constructed at the gorge in the mountainous area and reclaimed land from the sea in the Korean Peninsula. Those areas are not favorable for construction of waste landfill in geotechnical engineering aspect. In this study, the frictional characteristics of geosynthetics that used in the waste landfill were estimated. Then, the studies of the behavior of geosynthetics and stability of LDCRS (Leachate Detection, Collection, and Removal System) of side slope were conducted in the waste landfill by means of the pilot test, and numerical analysis. Geocomposite which is combined type or separated type is influenced on the strain itself, and also implicated in the stress and strain of geomembrane at the lower layer. The strain on the combined type of geocomposite is about 50% smaller than that of the separated type at the side slope. The lateral displacement and settlement of top at the slope with the separated type are three times greater than that of the combined type. In the numerical analysis, discontinuous plans in between ground and geosynthetic, geosynthetic and geosynthetic, goesynthetic and waste have been modeled with the interface element. The results gave a good agreement with the field large-scale model test. The relative displacements of geosynthetics were also investigated and hence the interface modeling of liner system is appropriate for analysis of geosynthetics liner system in the waste landfill.

• Journal of the Korean Geographical Society
• /
• v.34 no.2
• /
• pp.123-136
• /
• 1999

본 연구에서는 제주도의 사면별 강수 분포 특성을 파악하고자 하였다. 기압배치와 상층 풍향별로 4개 기상관측소의 일별 강수량 자료를 분석하였다. 제주도의 강수량은 북서사면 보다 남동사면 쪽이 많다. 그리고 대부분 온대성 저기압과 장마전선, 태풍에 의한 것이며, 앞의 두 경우는 남.동사면, 태풍에 의한 것은 북사면에 많다. 태풍에 의한 호우는 사면간의 강수량 차이가 적고, 저기압에 의한 것은 동서사면간, 장마전선에 의한 것은 남북사면간의 차이가 크다. 풍향별로는 남동과 남서풍계에 의한 강수가 많은데, 겨울에는 북서풍계에 의한 강수도 많다. 기압배치형 보다는 기류의 방향에 따라서 사면간의 강수량 차이가 크며, 남서, 남동풍계가 우세한 여름에는 남사면 강수량이 많고, 북서와 북동풍계가 우세한 겨울에는 북사면이 많다. 사면간의 강수차이는 미우인 경우 더욱 뚜렷하고, 미우는 겨울 북사면에 많다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.737-741
• /
• 2012

본 연구에서는 2011년 7월 27일 집중호우로 인한 서울시 우면산 산사태 지역을 대상으로 뿌리의 보강효과와 분포형 습윤지수를 고려한 GIS기반의 무한사면안 해석기법을 이용하여 사면안정해석을 실시하였다. 사면안정해석을 위한 지형 지질학적 매개변수는 수치지도, 정밀토양도 및 임상도(임상도와 영급도)로부터 추출하여 $10m{\times}10m$ 해상도의 공간분 포형 데이터베이스로 변환하였다. 또한, 분포형 습윤지수의 산정을 위한 비집수면적(specific catchment area)은 무한방향흐름 기법(IFD, infinity flow direction)을 이용하여 결정하였으며, 모형의 입력 강우자료는 서울시 서초와 남현 AWS의 산사태 발생초기와 종기시의 평균 일강우량을 적용하였다. 대상유역의 사면안정해석을 위해 격자별 안전률은 4개의 등급(unstable, quasi stable, moderately stable, stable)으로 구분하여 도시하였다. 산사태 발생인자별 분석결과, 무한사면안정해석기법을 이용하여 산정된 사면안전률은 사면경사에 매우 민감하게 반응하는 것으로 분석되었으며, 거주지 주변의 절개지 부근과 산지정상부근의 급경사지에서 불안정 지역이 집중적으로 분포하고 있음을 확인하였다.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.189-199
• /
• 2015

Our country's leading granite weathered soil of the ground slope failures that occur in cutting slope most cases, it does not require in-depth to the shear strength most of the surface layer is affected by weathering (1~2 m) at a shallow depth close to the ground, it is important to identify the reliability. Based on the result obtained in actual field investigation, the field slope type was classified by each type of wedge slope, Infinite slope, finite slope -I and finite slope -II, and the slope stability was examined respectively. In addition, using the numerical analysis results, the relationship between the slope inclination angle and safety factor was analyzed and it tried to offer basic data to which the stability in the field slope was able to be estimated by analyzing the safety factor change of the slope according to the slope type. In this study, classified into four types of natural slope, safety factor estimation method by slope types is proposed through the numerical analysis. However, some limit exists in generalizing in this research because it does not test various case studies. Therefore, the case study of a wide range of various sypes to assess the safety of various types slope can be made, accommodate a wide range of field conditions reasonable risk evaluation criteria may be derived.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.101-109
• /
• 2010

There are many slopes generally developed by excavation and cut slope with small steps on massive slopes of roads. Especially these cut slopes which excavating around fault fracture zone need a reinforcement technology in order to ensure safety. In the case of slope excavation, it is difficult to use the existing slope support at fracture zone because of geological characteristics. Especially the factor of safety decreases significantly due to the movement of blocks in bed rocks and the expansion of interspace of discontinuous planes in fractured zones caused by excavation. Thus an efficient reinforcement technique in accordance with geological properties of fracture zones needs to be developed because the existing slope support has a restricted application. Therefore it is necessary to develop the specialized rock bolt technique in order to ensure an efficient factor of safety for anomalous fracture zones in slopes and tunnels. The purpose of this study is to develop newly improved rock bolt to increase a supporting effect of the swellex bolt method used recently as a friction type in fracture zones.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.240-248
• /
• 1999

On the basis of data obtained from five forest roads collapsed due to a heavy rainfall of 1995 in Chunchon, Kangwon-do, this study was carried out to evaluate and predict the fill slope failure of forest roads with four factors of forest road structure and those of location condition by using Quantification theory(II). The results were summarized as follows ; In the structure factors of forest road, the fill slope failure was mainly occurred in longitudinal gradients less than $2^{\circ}$ or more than $4^{\circ}$, distance of surface-flow longer than 80m, fill slope length greater than 6m, and fill slope gradients steeper than $35^{\circ}$. In the factors of location condition, the failure was mainly occurred in ridge portion of road position, weathered rock and soft rock of constituent material, slope gradients in the range from $35^{\circ}$ to $45^{\circ}$, and concave and convex of longitudinal slope forms. The priority order for factors influencing on fill slope failure was ranked by fill slope length, constituent material, road position, and so on. And the rate of correct discrimination by analysis of fill slope failure was estimated at the high prediction of 86.5%.