• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.297-301
• /
• 2008

매년 집중호우로 인하여 사면붕괴 및 산사태가 발생하고 있다. 사면 붕괴의 원인은 단순히 한가지의 요소에 의하여 붕괴되지 않고 다양한 요인이 중첩되어 발생된다. 이런 요인들을 사전에 파악하여 붕괴원인을 규명하고 적절한 사면 보강 방안 및 설계를 실시하여야 할 것으로 생각된다. 본 고는 사면붕괴후 설계 보강방안에 대한 자료를 수집하고 분석을 실시하였다. 사면붕괴의 요인으로 생각하는 대표적인 사례를 열거하였다. 사면붕괴로 인해 발생하는 피해를 저감하고 재차 사면 붕괴를 방지하기 위하여 도움이 되었으면 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10b
• /
• pp.44-58
• /
• 2001

FRP(Fiberglass Reinforced Plastic)관을 이용한 사면보강은 천공 후 그라우트재에 압력을 가하여 그라우트재의 천공홀 충전뿐만 아니라 지반으로의 침투주입 효과를 일으켜, 전체적인 보강력 증대를 기대하는 공법이다. 이런 특성을 설계에 반영하기 위해서는 구조재료인 FRP관 자체에 의한 지반보강효과 뿐만 아니라 그라우팅에 따른 지반강도의 증진효과를 정량적으로 평가하는 것이 선행되어야 하나 아직까지는 이에 대한 연구가 부족한 실정이다. 따라서 대상지반을 토사와 암반사면으로 구분하여 각각의 보강효과를 확인하고자 현장시험 및 수치해석을 실시하였으며, 이로부터 지반종류에 따른 보강특성과 합리적인 설계를 위한 설계인자를 추출하고자 하였다.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.1-12
• /
• 1996

To design the safe and rational rock slope, several rock slopes of roads in Kang-won area were analyzed, and the following results were obtained ; 1. The results were analyzed by stereographic projection at the rock slope that the joint was developed. All of the sloped which were designed by standard slope of rock was not considered that the joints were unstable. 2. The relation of rainfall and slope failure, as well as the danger of failure, was very high when the maximum hourly rainfall was larger than 20mm and when there was a 2-day cumulative rainfall that was larger than 200mm. 3. In the design of rock slope, operated by the stereographic projection considering discontinuity. If turn out unstable, it should be analyzed carefully using the limit equilibrium method. 4. In the design of rock slope, it is desirable to consider the discontinuity of rock(joint, bedding, fault).

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.57-65
• /
• 2007

Slope collapse occurs mostly at the rainy season or thawing season in Korea. From a engineer point of view, the design criterion in recent of soil slopes during the rainfall have a conservative tendency because a slope stability is evaluated in the condition that ground water level is located in the surface. However, for the rational design of soil slopes during rainfall, the raining conditions and the unsaturated soil characteristics of soil slopes have to be considered. For the unsaturated soil characteristics of soil slopes, the laboratory tests for unsaturated soils and the seepage analyses for the raining conditions have to be performed. Due to these difficulties, a conservative design of soil slopes in the current design criterion has been carried out. In this paper, therefore, a simple design method is proposed. The method is considered to the unsaturated soil characteristics and the results of seepage analysis without numerical analysis. To verify the suggested design method, it is compared with both analysis results by current design criterion and analysis results based on the seepage analysis. Through the comparative study, it was found that the current design criterion has been excessively conservative. Hence, simple design method in this study was evaluated as the rational design for the soil slopes during rainfall.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.4
• /
• pp.67-74
• /
• 2007

Many studies for slope stability studies have indicated that the infiltration of rainwater into a slope decrease the slope stability. In order to minimize damage caused by slope failure, most design codes suggest that the slope stability be analyzed by saturated condition during rainy season. However it would be excessively conservative condition that every soil slope is saturated in rainy season irrespective of rainfall intensity, soil type and slope geometry. In addition, because most soil slopes are in an unsaturated state, it is necessary to consider the unsaturated characteristics of slope. This paper suggests a prediction method of saturation time for the weathered granite soil slopes due to rainfalls. The finite element analysis of transient water flow through unsaturated slope was used to investigate effects of soil-water characteristics, permeability at saturation, slope geometry, and rainfall intensity. From the result of these analyses, the prediction charts considering soil-water characteristics, permeability at saturation, and slope height were proposed in this study. It is possible to the time required to be saturated slope after rainfall.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.17-26
• /
• 2008

In this study, the design method of slope reinforced by the earth retention systems were systematically developed, and the flow chart of design procedure fur each system were constructed to design the slope rationally. The proposed design method is composed of 5 steps such as field condition investigation step, slope design step, landslide occurrence prediction step, slope failure scale estimation step and reinforcement countermeasure selection step. The quantitative standard of slope failure scale was established based on the arrangement of various overseas standards which is estimating the slope failure, and the analysis of slope failure scale which is occurred in the country. The slope failure scale is classified into three categories the small scale of slope failure is less than $150m^3$ of slope failure volume, the middle scale of slope failure is from $150m^3$ to $900m^3$ and the large scale of slope failure is more than $900m^3$. The earth retention system could be selected by the proposed slope failure scale based on the slope failure volume. Meanwhile, the design methods of earth retention system such as piles, soil nails and anchors were developed. The optimal countermeasure for slope stability could be proposed using above design methods.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.157-170
• /
• 1999

A new design technique is presented to stabilize cut slopes in cohesive soils by use of piles. The design method can consider systematically factors such as the gradient and height of slope, the number and position of pile's rows, the interval and stiffness of piles, etc. The design method is established on the basis of the stability analysis of slope with rows of piles. The basic concept applied in the stability analysis is that the soil across the open space between piles can be retained by the arching action of the soil, when a row of piles is installed in soil undergoing lateral movement such as landslides. To obtain the whole stability of slope containing piles, two kinds of analyses for the pile-stability and the slope- stability must be performed simultaneously. An instrumentation system has been installed at a cut slope in cohesive soil, which has been designed according to the presented design process. The behavior of both the piles and the soil across the open space between piles is observed precisely. The result of instrumentation shows that the cut slope has been stabilized by the contribution of stabilizing effect of piles on the slope stability in cohesive soil.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.98-107
• /
• 2020

In surface mining, it is very important to create a mining area for economical mining. This study examined the contribution of design factors on slope stability with different slope design and blasting conditions. The design factors were the properties of the rock, the slope angle and the bench height, and the blasting conditions were reflected at different explosive weight and distances. The safety factor of slope was calculated by shear strength reduction method through 3D modeling, and the contribution rate of rock slope was 94.8%, which is relatively higher than other design factors, slope angle 0.89%, bench height 0.58%, and blasting It is shown that it affects about 3.73%, and it can be seen that blasting at a close distance can affect the stability of the slope.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.447-456
• /
• 2008

Open-pit mine slope design must be carried out from the economical efficiency and stability point of view. The overall slope angle is the primary design variable because of limited support or reinforce options available. In this study, the slope angle and critical slope height of large coal mine located in Pasir, Kalimantan, Indonesia were determined from safety point of view. Failure time prediction based on the monitored displacement using inverse velocity was also conducted to make up fir the uncertainty of the slope design. From the study, critical slope height was calculated as $353{\sim}438m$ under safety factor guideline (SF>1.5) and $30^{\circ}$ overall slope angle but loom is recommended as a critical slope height considering the results of sensitivity analysis of strength parameters. The results of inverse velocity analysis also showed good agreement with field slope cases. Therefore, failure of unstable slope can be roughly detected before real slope failure.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.569-572
• /
• 2008

The slope failures frequently occurred during heavy rainfalls in Korea of which 70% consists of mountains result in average 60 casualties and hundreds of millions US dollars of property damage. The status of design methods were analyzed with use of existing 102 design reports, Also, the design standards related to cut slopes are suggested by various institutions but the contents of standards are not proper to reflect the complicated geological features of Korea. And most reports rarely followed the suggested standards and are insufficiently conducted.