• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.267-273
• /
• 2012

The short-range communication module was developed in this paper which is suitable for the point-to-multipoint circumstances of 40 terminals communicating frequently in about 50 meters. The media access control layer of this communication module using asynchronous time-division multiplexing provides a fast and robust performance even in the worst case of simultaneous transmission events, and low packet error rate was measured a in LOS (Line-of-sight) circumstance by adding the function of acknowledge response to media access control layer. The difference test was carried out in order to measure the performance of point-to-multipoint communication. Two communication modules are respectively measured and graphed in 10 branches to 40 branches. The communication module developed in this paper showed a faster performance than the commercial Zigbee module in the specific case presented in this paper. Especially, in over 20 branches showed wide differences of the transmission speed. This results is caused by more network overhead of Zigbee whose wider applications needs the network layer and applicaiton layer besides media access control layer. Also, the asynchronous time-division multiplexing proposed in this paper are more suitable than CSMA-CA of Zigbee module when a lot of module ought to be frequently communicated in small area.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.62-70
• /
• 2007

In this paper, the boost Power Factor Correction(PFC) technique for Direct Torque Control(DTC) of brushless DC motor drive in the constant torque region is implemented on a TMS320F2812DSP. Unlike conventional six-step PWM current control, by properly selecting the inverter voltage space vectors of the two-phase conduction mode from a simple look-up table at a predefined sampling time, the desired quasi-square wave current is obtained, therefore a much faster torque response is achieved compared to conventional current control. Furthermore, to eliminate the low-frequency torque oscillations caused by the non-ideal trapezoidal shape of the actual back-EMF waveform of the BLDC motor, a pre-stored back-EMF versus position look-up table is designed. The duty cycle of the boost converter is determined by a control algorithm based on the input voltage, output voltage which is the dc-link of the BLDC motor drive, and inductor current using average current control method with input voltage feed-forward compensation during each sampling period of the drive system. With the emergence of high-speed digital signal processors(DSPs), both PFC and simple DTC algorithms can be executed during a single sampling period of the BLDC motor drive. In the proposed method, since no PWM algorithm is required for DTC or BLDC motor drive, only one PWM output for the boost converter with 80 kHz switching frequency is used in a TMS320F2812 DSP. The validity and effectiveness of the proposed DTC of BLDC motor drive scheme with PFC are verified through the experimental results. The test results verify that the proposed PFC for DTC of BLDC motor drive improves power factor considerably from 0.77 to as close as 0.9997 with and without load conditions.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.91-107
• /
• 2006

To handling the extreme situation that must manage positional information of a very large volume, at least millions of moving objects. A cluster-based sealable distributed computing system architecture, called the GALIS which consists of multiple data processors, each dedicated to keeping records relevant to a different geographical zone and a different time zone, was proposed. In this paper, we proposed a valid time management and time-zone shifting scheme, which are essential in realizing the long-term location data subsystem of GALIS, but missed in our previous prototype development. We explain how to manage valid time of moving objects to avoid ambiguity of location information. We also describe time-zone shifting algorithm with three variations, such as Real Time-Time Zone Shifting, Batch-Time Zone Shifting, Table Partitioned Batch-Time Zone Shifting, Through experiments related with query processing time and CPU utilization, we show the efficiency of the proposed time-zone shifting schemes.

• The KIPS Transactions:PartB
• /
• v.12B no.3 s.99
• /
• pp.349-356
• /
• 2005

Artificial Organism-used application areas are expanding at a break-neck speed with a view to getting things done in a dynamic and Informal environment. A use of general programming or traditional hi methods as the representation of Artificial Organism behavior knowledge in these areas can cause problems related to frequent modifications and bad response in an unpredictable situation. Strategies aimed at solving these problems in a machine-learning fashion includes Genetic Programming and Evolving Neural Networks. But the learning method of Artificial-Organism is not good yet, and can't represent life in the environment. With this in mind, this research is designed to come up with a new behavior evolution model. The model represents behavior knowledge with Classification Rules and Enhanced Backpropation Neural Networks and discriminate the denomination. To evaluate the model, the researcher applied it to problems with the competition of Artificial-Organism in the Simulator and compared with other system. The survey shows that the model prevails in terms of the speed and Qualify of learning. The model is characterized by the simultaneous learning of classification rules and neural networks represented on chromosomes with the help of Genetic Algorithm and the consolidation of learning ability caused by the hybrid processing of the classification rules and Enhanced Backpropagation Neural Network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.202-209
• /
• 2005

This study concerns the performance of boiling heat transfer in inclined thermosyphons with internal grooves. A study was carried out with the performance of the heat transfer of the inclined thermosyphon having 60 internal grooves in which boiling and condensation occur. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphon is also tested for comparison. Distilled water, methanol and ethanol have been used as the working fluid. The inclination angle, three working fluids, heat flux and the boiling heat transfer coefficient at the evaporator zone are estimated from the experimental results. The experimental results have been assessed and compared with existing correlations. Imura's and Kusuda's correlation for boiling showed in good agreement with experimental results within ${\pm}20%$ in plain thermosyphon. The high heat transfer coefficient was found between $25^{\circ}$ and $30^{\circ}$ of inclination angle for water and between $20^{\circ}$ and $25^{\circ}$ for methanol and ethanol. The relatively high rates of heat transfer have been achieved in the thermosyphon with internal micro grooves.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.307-315
• /
• 2005

In the ubiquitous computing environments, ICT industries of current society are developed in enormous growth. Medicine or patients with mobile devices can access at any time, any place. The medical procedures at the patient bedside are out of the scope of current systems, which means that patient record and image data access during the medical visit or the execution, recording and confirmation of the medicine prescriptions, still do not enjoy computerized support. Today, the exchange of medical images and clinical information is well defined by DICOM and HL7 standards. The DICOM independent terminal equipment image access system was developed in which a DICOM Engine acts as the gateway between a PACS DB and user's terminal. Implementation system is compatible with most currently available Integration system models. This paper presents a software technology where the medical and nursing staff will be equipped with any device connected by wire and wireless to a central server that provides access to the electronic patient records and that will actively inform about tasks pending distribution. The prototype described in this article implements a medical images and structured reports server that makes the search and recovery of data stored in the DICOM standard possible.

• Journal of Hospice and Palliative Care
• /
• v.16 no.2
• /
• pp.98-107
• /
• 2013

Purpose: This study was conducted to investigate how home-based hospice care is provided in Korea. Methods: From July 2011 through August 2011, 29 hospice facilities that provide home-based hospice care were surveyed using a questionnaire. Items included in the questionnaire were general characteristics of the organization, staff members, service programs, difficulties. Results: Among the surveyed, hospice care was hospital-based for 11 (37.9%) facilities, hospital-independent center-based care for four (13.8%) and home-based care only for 10 (34.5%). Near half the participants were located in Seoul and Gyeonggi-do. Caregivers included nurses for 62.1% of the participants, volunteers 62.0%, pastors 44.8%, social workers 37.9%, coordinators 31.0% and doctors 31.0%. The facilities offered service programs such as family counseling (96.6%), transfer to other facilities (93.1%), psychological support (89.7%), bereavement support (86.2%), dying care (79.3%), clinical care (75.9%) and spiritual support (75.9%). The major obstacles were financial issues (24.1%), lack of trained staff (20.7%) and staff members' lack of awareness of home-based hospice care (13.8%). Conclusion: In Korea, home-based hospice care is provided by an insufficient number of facilities. Moreover, the service providers are experiencing difficulties such as lack of trained staff, insufficient financial resource and staff's lack of awareness of home-based hospice care. It is necessary to increase the number of home-based hospice care facilities with consideration of even distribution across regions and standard staffing and service programs and develop related insurance policies.

• Journal of Internet Computing and Services
• /
• v.5 no.1
• /
• pp.67-84
• /
• 2004

Real-time database systems (RTDBS) are database systems whose transactions are associated with timing constraints such as deadlines. Therefore transaction needs to be completed by a certain deadline. Besides meeting timing constraints, a RTDBS needs to observe data consistency constraints as well. That is to say, unlike a conventional database system, whose main objective is to provide fast average response time, RTDBS may be evaluated based on how often transactions miss their deadline, the average lateness or tardiness of late transactions, the cost incurred in transactions missing their deadlines. Therefore, in RTDBS, transactions should be scheduled according to their criticalness and tightness of their deadlines, even If this means sacrificing fairness and system throughput, And It always must guarantee preceding process of the transaction with the higher priority. In this paper, we propose an efficient real-time scheduling algorithm (Multi-level EFDF) that alleviates problems of the existing real-time scheduling algorithms, a real-time concurrency control algorithm(2PL-FT) for firm and soft real-time transactions. And we compare the proposed 2PL F[ with AVCC in terms of the restarting ratio and the deadline missing ratio of transactions. We show through experiments that our algorithms achieve good performance over the other existing methods proposed earlier.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.3 s.15
• /
• pp.119-130
• /
• 2005

A spatial data warehouse is a system that stores geographical information as a subject oriented, integrated, time-variant, non-volatile collection for efficiently supporting decision. This system consists of a builder and a spatial data warehouse server. A spatial data warehouse server suspends user services, stores transferred data in the data repository and constructs index using stored data for short response time. Existing methods that construct index are bulk-insertion and index transfer methods. The Bulk-insertion method has high clustering cost for constructing index and searching cost. The Index transfer method has improper for the index reconstruction method of a spatial data warehouse where periodic source data are inserted. In this paper, the efficient index reconstruction method using a partial index in a spatial data warehouse is proposed. This method is an efficient reconstruction method that transfers a partial index and stores a partial index with expecting physical location. This method clusters a spatial data making it suitable to construct index and change treated clusters to a partial index and transfers pages that store a partial index. A spatial data warehouse server reserves sequent physical space of a disk and stores a partial index in the reserved space. Through inserting a partial index into constructed index in a spatial data warehouse server, searching, splitting, remodifing costs are reduced to the minimum.