• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.33-52
• /
• 1997

A three dimensional nonlinear finite element analysis is used to study the influence of various design decisions for tieback walls. The numerical model simulates the soldier piles and the tendon bonded length of the anchors with beam elements, the unbonded tendon with a spring element, the wood lagging with the shell elements, and the soil with solid 3D nonlinear elements. The soil model used is a modified hyperbolic model with unloading hysteresis. The complete sequence of construction is simulated including the excavation, and the placement and stressing of the anchors. The numerical model is calibrated against a full scale instrumented tieback wall at the National Geotechnical Experimentation Site (NGES) on the Riverside Campus of Texas A&M University. Then a parametric study is conducted. The results give information on the influence of the following factors on the wall behavior : location of the first anchor, length of the tendon unbonded zone, magnitude of the anchor forces, embedment of the soldier piles, stiffness of the wood lagging, and of the piles. The implications in design are discussed.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.71-76
• /
• 2007

Recently, many industries have been employing the application of laser beam welding, due to the resulting high welding quality, such as smaller width of melting and heat affective zone, smaller welding deformation, and fine grains of weldment, compared to arc welding. However, in order to appropriately utilize this welding process with steel structure, the characteristics of welding residual stresses and fracture toughness in welded joints are to be investigated for reliability. Therefore, in this study, the mechanical properties of weldments by arc and laser welding are investigated using FEM to confirm the weldability of laser welding to the general structural steel (HT50). The Charpy impact test and 3-points bending CTOD test are carried out in the range of temperatures between $-60^{\circ}C\;and\;20^{\circ}C$, in order to understand the effect on the fracture toughness of weldments. From the research results, it has been found that the maximum residual stress appears at the center of plate thickness, and that the fracture toughness is influenced by strength mis-match.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.44-44
• /
• 2008

To date, rubbing has been widely used to align LC molecules uniformly. Although rubbing can be simple, it has fundamental problems such as the generation of defects by dust and static electricity, and difficulty in achieving a uniform LC alignment on a large substrate. Therefore, non contact alignment has been investigated. Ion beam induced alignment method, which provides controllability, nonstop process, and high resolution display. In this study, we investigated liquid crystal (LC) alignment with ion beam (IB) that non contact alignment technique on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide under various ion beam angles. In this experiment, Polyimide layer was coated on glass by spin-coating and Voltage-transmittance(VT) and response time characteristics of the TN cell were measured by a LCD evaluation system. The good characteristics of the nematic liquid crystal (NLC) alignment with the ion beam exposure polyimide surface was observed. The tilt angle of NLC on the PI surface with ion beam exposure can be measured under $1^{\circ}$ for all of irradiation angles. In addition, it can be achieved the good EO properties, and residual DC property of the ion beam aligned TN cell on polyimide surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.43-43
• /
• 2008

Recently, it is widely studied to liquid crystal (LC) alignment using ion-beam exposure. Because conventional rubbing method has some problems such as defects from dust and electrostatic charges and rubbing scratch during rubbing process. Moreover rubbing method needs cleaning process to remove these defects. Therefore rubbing-free techniques like ion-beam method are strongly required. We studied LC alignment by controlling ion-beam irradiation angles and electro-optical (EO) characteristics of twisted nematic LC on the polyimide surface. In this experiment, a good uniform alignment of the nematic liquid crystal (NLC) with the ion-beam exposure on the polyimide (PI) surface was observed. We also achieved low pretilt angle as function of ion-beam irradiation angles. X-ray photoelectron spectroscopic (XPS) analysis provided chemical evidence for LC alignment by controlling ion-beam irradiation angles. In addition, it can be achieved the good EO properties of the ion-beam-aligned twisted nematic liquid crystal display (TN-LCD) on PI surface. Some other experiments results and discussion will be included in the presentation.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.139-140
• /
• 2008

지상라이다는 고정도의 3차원 영상을 제공하고 레이저 빔을 현장이나 대상물에 발사하여 짧은 시간에 수백만점의 3차원좌표를 기록할 수 있는 최신 측량장비로서 다양한 응용분야에서 두각을 나타내고 있다. 본 연구에서는 지상라이다를 이용한 건축물의 3자윈 자동 윤곽선 추출을 다룬다. 지상라이다는 건축물의 3차원 윤곽선을 신속하게 추출할 수 있지만 지상기반 시스템이므로 여러 가지 장애물 때문에 건국물의 하단부에서는 추출이 쉽지 않다. 기존 항공라이다를 이용한 알고리즘에서는 사진의 색상차나 모폴로지 특성에 의존하여 범위를 제한하고, 이를 기반으로 윤곽선을 추출하였다. 하지만 지상라이다의 경우 항공라이다에 비해 분해능이 월등히 높다. 또한, 지상라이다는 지상에서 측정하기 때문에 항공라이다에서 어려운 건축물의 측면이나 정면도 윤곽선 추출이 가능하기 때문에 본 논문에서는 사진을 이용하지 않고 전처리를 하지 않은 데이터를 직접 이용하여 건물의 정면 윤곽선을 추출하는 것을 제안한다. 건물의 크기와 데이터 수 즉, 라이다로 측정한 포인트 수를 고려한 효율적인 Decimation방법을 제안하고 또한, Decimation된 데이터이서 지역적으로 제일 큰 값과 작은 값을 찾아낸다. 그 중 많이 벗어난 점을 편차를 이용하여 제거한다. 이렇게 찾아낸 건축물의 외곽점들을 이어 만든 윤곽선을 최종적으로 보간하여 좀 더 현실과 가까운 윤곽선 추출 방법을 제안한다.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1055-1062
• /
• 2001

Study, it is the purpose to develope a cheap and compact pulsed $CO_2$ laser with pulse repetition rate range of 1 KHz. We used a IGBT switched power supply as a power supply, which is cheap and simple comparing to others. PIC one-chip microprocessor was used for precise control of a laser power supply on the control part. And the laser cavity was fabricated as an axial and water cooled type. The laser performance characteristics as various parameters, such as pulse repetition rate, gas pressure, and gas mixture rate have been investigated. The experiment was done under the condition of total pressure of $CO_2$： $N_2$：He ＝ 1：3：10, 1：1.5：5, 1：9：15 from 6 Torr to 15 Torr and pulse repetition rate from 100 Hz to 900 Hz. As a result, the maximum average outpu was about 20.5 W at the total pressure of 15 Torr, the gas mixture $CO_2$：$N_2$：He ＝ 1：9：15 and the pulse repetition rate of 700 Hz.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.843-846
• /
• 1992

This thesis was investigated on optical-and ion-induced characteristics in positive(a-$Se_{75}Ge_{25}$) and negative (Ag/a-$Se_{75}Ge_{25}$) resists for focused-ion-beam microlithogaphy. The a-$Se_{75}Ge_{25}$ inorganic thin film shows an increase in optical absorption after exposure to$\sim$$10^{16}$ dose(ions/$cm^{2}$) of Ga ions. The observed shift in the absorption edge toward longer wavelengths is consistent with that in films exposed to band-gap photons ($\sim$$10^{20}$ photons/$cm^{2}$). But, ion induced shift is twice as much as that in film exposed to optical radiation. This result may be related with microstructural rearrangements with in the short range of SeGe network. Due to changes in the short range order, the chemical bonding may be affected, which results in increased chemical dissolution in ion-induced film. Also, this resist exhibits good thermal stability because of its high Tg(~220$^{\circ}C$). The composition of deposited film measured by AES is consistent with that of bulk.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.62-68
• /
• 2020

Recently, research on precise parts required in aerospace, ship, and automobile industries has been actively conducted. In this paper, electron beam drilling machining parameters were selected and experiments were conducted to compare processing characteristics analysis according to machining parameters through machining experiments of a vaporization amplification sheet to which STS 304 was applied. Also, as a result of measuring the machining. As the thickness gradually increased, it was confirmed that the electron beam could not reach the vaporization amplification sheet and thus melted on the surface of the material. As a result of the experimental analysis, it was analyzed that the vaporization explosion reaction of the vaporization amplification sheet was not normally performed due to the working distance (WD) according to the material thickness.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.214-222
• /
• 2001

A precise echosounding system to investigate the topographical characteristics of the coastal fishing ground was composed of a public-DGPS receiver, a single beam echosounder and a survey software. To confirm the usefulness of the system, a set-net fishing ground and the distribution of artificial reefs were surveyed. The results obtained are as follows : 1. The 2-D positioning error of the public-DGPS receiver with a DGPS mode and a GPS mode was 5.47 m, 7.03 m, respectively. 2. The experimented set-net fishing ground was located on the level ground at the depth of 9-10 m, a small size valley 1-2 m deep and approximately 10 m wide was found at a distance of 120 m from the set-net to the south. 3. In the artificial reefs' water area near the Jaran Bay, it was confirmed that twenty rectangular artificial reefs were established by the piece at the depth of 15-25 m and a natural reef 5-8 m high on the sea bed was located near the group of artificial reefs. 4. It was confirmed that the precise echosounding system was a useful tool in the pre-study to choice an appropriate water area to provide the artificial reef.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.6
• /
• pp.329-334
• /
• 2003

Microstructure and mechanical properties of $(Ti_{1-x}Alx)N$ films, Produced by the the Ion Beam Sputtering(IBS) method, were studied by changing the Ti, Al contents. The compositions of films determined by RBS were $(Ti_{0.75}Al_{0.25})N$, $(Ti_{0.61}Al_{0.39})N$ and $(Ti_{0.5}Al_{0.5})N$, and XPS binding energies of Ti2P, A12p and N1s shifted to higher energies than those of pure Ti, Al and N, which indicated that nitrides were formed. XRD results indicated that the NaCl structure for $$x{\leq_-}0.39$$ changed into amorphous structure at x=0.5. For films with $$x{\leq_-}0.39$$, the lattice parameter decreased in proportion to the Al content. Nanoindentation hardness value were above HV=3300 at Al content up to x=0.39. However, the hardness of films with x=0.5 abruptly decreased to HV=1800, and this lower hardness values were attributed to different crystal structure. Critical load(Lc) in scratch test showed 23N at x=0.25, 22N at x=0.39 and 22N at x=0.5, which indicated that films with different Al contents showed similar adhesion behavior.