• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.452-456
• /
• 2010

SIR based beam switching in distributed controlled cellular systems is proposed to reduce intercell interference. Compared with Random beam switching that beam switching pattern is randomly selected and cannot avoid beam collision between neighboring cell, SIR based beam switching update its switching pattern based on SIR report from mobile. Neighboring cells independently update their switching patterns and the updated patterns converge to the patterns that minimize beam collision. We shows SIR base beam switching has 20% gain compared with random beam switching in two neighboring cell model.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.210-211
• /
• 2005

본 연구에서는 전자빔과 흡착제 기술을 이용한 에틸벤젠의 제어효율 변화를 고찰하였다. 전자빔만을 사용하였을 때보다 세라믹 층을 두었을 경우 약 4kGy에서 제어효율의 차이가 나타나기 시작하였고, 흡수선량이 10kGy에 이르렀을 때에는 약 30%의 제어효율 향상이 나타났다.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.247-258
• /
• 2020

In this paper, based on a stochastic parallel gradient descent (SPGD) algorithm we study phase control of a coherent-beam-combining system under turbulent atmospheric conditions. Based on the statistical theory of atmospheric turbulence, we carry out the analysis of the phase and wavefront distortion of a laser beam propagating through a turbulent atmospheric medium. We also conduct numerical simulations of a coherent-beam-combining system with 7- and 19-channel laser beams distorted by atmospheric turbulence. Through numerical simulations, we characterize the phase-control characteristics and efficiency of the coherent-beam-combining system under various degrees of atmospheric turbulence. It is verified that the SPGD algorithm is capable of realizing 7-channel coherent beam combining with a beam-combining efficiency of more than 90%, even under the turbulent atmospheric conditions up to cn2 of 10-13 m-2/3. In the case of 19-channel coherent beam combining, it is shown that the same turbulent atmospheric conditions result in a drastic reduction of the beam-combining efficiency down to 60%, due to the elevated impact of the corresponding refractive-index inhomogeneity. In addition, by putting together the number of iterations of the SPGD algorithm required for phase locking under atmospheric turbulence and the time intervals of atmospheric phenomena, which typically are of the order of ㎲, it is estimated that hundreds of MHz to a few GHz of computing bandwidth of SPGD-based phase control may be required for a coherent-beam-combining system to confront such turbulent atmospheric conditions. We expect the results of this paper to be useful for quantitatively analyzing and predicting the effects of atmospheric turbulence on the SPGD-based phase-control performance of a coherent-beam-combining system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.154-157
• /
• 2005

The use of electron-beam(E-Beam) manufacture systems provides a means to alleviate optic exposure equipment's problems. We designed an E-beam manufacture system with SEM function. Optimal beam scanning is one of the most important conditions in the performance of E-beam and SEM. The performance of E-beam manufacture system and images of SEM are a close affinity with each other. Developed E-beam manufacture system consist of the controllers of high voltage, scanning, optic and high voltage generator. In this paper, we analyze the condition of steady beam scanning and describe the development of controller fer optimal beam scanning.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.53-60
• /
• 2013

In this paper, the new multi-beamforming is proposed for Multiple-input multiple-output (MIMO) Multicarrier-Code division multiple access(MC-CDMA) systems to overcome the decrease of performance due to multiuser interference and multiple-antenna interference. Installing the number of multi-beamformer which is equal to the number of multi-transmitter antennas and exploiting the proposed approach at the receiver of MIMO MC-CDMA, the multi-beams are formed toward each multi-antenna of desired user and null beam are formed to other interference. Therefore, the performance of MIMO MC-CDMA system is improved as removing the interference signal. BER performance improvement is investigated through computer simulation by the proposed approach to MIMO MC-CDMA system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.24-31
• /
• 2009

In this paper, the new technique combing power control with Pre-FFT beamforming is proposed for MIMO(multi-input multi-output)-OFDM(orthogonal frequency division multiplexing) system. As combining the proposed power control with beamforming, we can iteratively control the transmittingpower and update the weight of beamformer together. And then, the beam is formed toward the desired direction and SNIR of each subcarrier is converged to target SNIR. Therefore, the performance of MIMO-OFDM system is very improved. BER performance improvement of the proposed approach is investigated through computer simulation by combining power allocation algorithm with MIMO-OFDM system using Pre-FFT beamformer

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.370-370
• /
• 2010

최근 자연모사를 통한 초저마찰 연구가 활발히 진행되고 있으며 리소그라피, 레이져 가공법 등의 다양한 방법을 통해 표면구조 제어가 시도되고 있다. 본 연구에서는 자장여과 아크 플라즈마 이온 소스를 이용한 WC-Co 및 SCM 415 금속소재의 표면구조 형상제어를 통해 저마찰 특성을 시도하였다. 자장여과 아크 소스는 90도 꺽힘형이며 5개의 자장 코일을 통해 아크 음극에서 발생된 고밀도($10^{13}\;cm^{-3}$ 이상) 플라즈마를 표면처리 대상 기판까지 확산시켰다. 공정 압력은 알곤가스 1 mTorr, 아크 방전 전류는 25 A, 플라즈마 수송 덕트 전압은 10 V이다. 기판 전압은 비대칭 펄스 (-80 %/+5 %)로 -600 V에서 -800 V까지 인가되었으며 -600 V 비대칭 펄스 인가시기판으로 입사하는 알곤 이온 전류 밀도는 약 $4.5\;mA/cm^2$ 이다. WC-Co 시편의 경우 -600 V 전압 인가시, 이온빔 처리 전 46.4 nm(${\pm}12.7\;nm$)의 조도를 갖는 시편이 5분, 10분, 20분동안 이온빔 처리함에 따라 72.8 nm(${\pm}3\;nm$), 108.2 nm(${\pm}5.9\;nm$), 257.8 nm(${\pm}24.4\;nm$)의 조도를 나타내었다. SCM415 시편의 경우 -800 V 인가시, 이온빔 처리 전 20.4 nm(${\pm}2.9\;nm$)의 조도를 갖는 시편이 20분동안 이온빔 처리함에 따라 275.1 nm(${\pm}43\;nm$)의 조도를 나타내었다. 또한 주사전자현미경을 통한 표면 형상 관찰 결과, 이온빔 식각을 통해 생성된 거친 표면에 $3-5\;{\mu}m$ 직경의 돌기들이 산발적으로 생성됨을 확인했다. 마찰계수 측정 결과 SCM415 시편의 경우, 이온빔 처리전 마찰계수 0.65에서 조도 275.1 nm 시편의 경우 0.48로 감소하였다. 본 연구를 통해 이온빔 식각을 이용한 금속표면 제어 및 저마찰 특성 향상의 가능성을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.115-121
• /
• 2000

Command shaping is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam in finite time. The command is constructed by solving linear equations. The finite time duration in which the desired motion of joint angle is achieved along with elimination of the residual vibration can be arbitrarily specified. The necessary conditions for using command as a reference input for the joint angle in a closed-loop configuration are also discussed. The effectiveness of Proposed scheme is demonstrated through computer simulation.

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2003

An axial electron beam gun system, which emits the electron beam power of 50 kW, has been manufactured. The electron beam gun consists of two parts. One is the electron beam generation part. including the filament, cathode, and anode. The maximum beam current is 2 A and the acceleration voltage is 25 kV. The other part includes the focusing-, deflection-, and scanning coils. The beam diameter and ham trajectory can be controlled by these coils. The characteristic of each part is measured ior the optimum condition of evaporation process. Moreover, Helmholtz coil is installed inside the vacuum chamber to adjust the incident angel of the beam to the melting surface for the maximum evaporation. We report on the evaporation rates for zirconium(Zr) and gadolinium(Gd) metals which have the high melting temperatures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.653-663
• /
• 2014

To cope with an increasing amount of data traffic, research efforts are being made to maximize the data rate by reducing the interference between the transmission nodes. This paper also focuses on interference control schemes utilizing antenna sub-array beam-forming. The first scheme relies on horizontal beam rotation which utilizes three types of narrow beam patterns. Different beam patterns are applied to transmit signals in rotating fashion to control the interference. The second scheme is based on user-specific sub-array beamforming, which uses the precoding matrix based on users' location and controls the amount of interference in the multi-user environment. The performance of the proposed schemes is evaluated using the computer simulation to demonstrate the performance enhancement.