• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.681-688
• /
• 2022

In this study, the process of drone photography, automatic volume calculation, total floor area conversion, and waste calculation was constructed as a QGIS plug-in to predict the demolition waste (DW) generated in an aged area where drawing information or building information is uncertain. Through a case study, the high consistency between the automatically calculated volume using the drone and the BIM volume based on the field measurement was confirmed. Field application was carried out for the planned demolition work site, and the consistency between the drone-based volume and the actual measurement-BIM-based volume was reconfirmed. The waste generation unit was applied and the amount of DW was calculated by setting the floor height and building type, and the entire process was completed within 6 hours. Although the difference between building information and building objects through drones occurred according to the setting of temporary structures, loads, and floor heights, it was found that the actual amount of DW was generated more than the initial estimate. It is expected that measures to improve the accuracy of volume and floor area conversion will be required through case studies in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.640-640
• /
• 2015

2010년과 2011년 서울에서 발생한 집중호우와 2014년 부산에서 발생한 집중호우의 발생으로 막대한 재산상의 피해와 사상자를 냈다. 2010년 9월 21일에 발생한 집중호우는 1908년 관측시작이래 가장 많은 비가 내린 것으로 기록되었으며 주거지 4,727호, 상가 1,164호, 공장 126동 등이 침수되고 13시를 기준으로 강서지점의 경우 시간당 98.5mm의 기록적인 강우를 기록하였으나, 관악지점은 5.5mm에 그쳐 두 지점간의 시간당 강우량의 편차가 약 200배 가까이 차이가 나는 것으로 나타났다. 이와 같이 최근 도시지역에서 국지성 집중호우가 증가하고 있으며 지역별 강우 편차가 크고 이에 따라 침수피해발생 여부도 지역에 따라 달라진다. 강수의 공간적 분포와 그로 인한 침수해석은 도시돌발홍수 예경보 시스템에 있어 무엇보다도 중요하다. 본 연구의 목적은 도시지역 돌발홍수 예경보 시스템 구축을 위한 정량적 강수추정 QPE(Quantitative Precipitation Estimation)기법에 따른 수리 수문학적 영향을 평가하는 것이다. 정량적 강수추정을 위해 AWS, SKP, 레이더 자료를 활용하여 250m의 해상도를 가지도록 크리깅을 적용하였다: QPE 1은 34개의 AWS의 지점우량을 지구통계학적 기법 중의 하나인 크리깅을 이용하여 산정한 기법, QPE 2는 AWS와 156개의 SKP의 강우데이터를 크리깅을 이용하여 산정한 기법, QPE 3는 광덕산 레이더를 이용한 기법, QPE 4는 AWS, SKP, 광덕산 레이더 자료를 조건부 합성한 기법이다. 월류량을 산정하기 위해 도시유출해석모형인 SWMM을 강남역 일대를 대상으로 구축하고 우수관로 시스템으로 유입되지 못한 노면류(Surface flow)를 함께 고려하였다. 침수해석을 위해서는 DHM모델을 적용하였으며 2013년 7월 기간에 발생한 호우에 대하여 분석을 수행하였다. 비교수행을 위해서 인접한 서초 AWS와 강남 AWS의 지점강우량도 함께 고려하였으며 모의결과를 국가 재난관리 정보 시스템(NMDS)에 침수피해가 확인된 가옥 및 빌딩 정보와 일치여부를 적합도로 산정하였다. 산정된 적합도를 통하여 정량적 강수추정기법에 따른 수리?수문학적 영향을 평가하였다. 실제 침수흔적정보와 비교 결과, QPE 2와 QPE4가 가장 적합도가 높았으며 이에 따라 고밀도의 관측망의 구성이 도시지역 침수해석결과에도 적합할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.23-30
• /
• 2017

In the AEC(Architecture, Engineering and Construction) industry, BIM(Building Information Modeling) technology not only helps design intent efficiently, but also realizes an object-oriented design including building's life cycle information. Thus it can manage all data created in each building stage and the roles of BIM are greatly expanded. Contractors and designers have been trying to adopt BIM to design competitions and validate it for the best result in various aspects. Via the computational simulation which differs from the existing process, effective evaluation can be done. For this process, a modeling guideline for each kind of BIM tool and a validation system for the confidential assessment are required. This paper explains a new process about design evaluation methods and process using BIM technologies which follow the new paradigm in construction industry through complement points by an example of a competition activity of the Korea Power Exchange(KPX) headquarter office. In conclusion, this paper provides a basic data input guideline based on open BIM for automatic assessment and interoperability between different BIM systems and suggests a practical usage of the rule-based Model Checker.

• KSCI Review
• /
• v.1 no.2
• /
• pp.47-72
• /
• 1995

지금까지 나타난 많은 리더십 이론이 주로 기독교 문화권인 서구에서 연구된 것을 문화권이 다른 우리나라에 적용하고자 하는 것이 기존의 연구 경향이었다. 오랫동안 전통이 되어 온 우리 특유의 조직 문화 중에서 특히 관료적이고 권위주의적인 조직 문화에 새로운 변화가 일어나고 있는 과도기적인 현시점에서 최근에 나타난 리더십 이론인 B.M.Bass의 변형적 리더십 이론을 모델로 하여 우리 기업에 적절한 리더십 유형을 찾는 것이 일차적 목적이며 여기서 찾아낸 리더십 유형 별로 조직원의 상사 만족도에 미치는 영향을 알아보는 것이 이 연구의 목적이었다. 따라서 이 논문에서 제시한 리더십 유형을 보면 변혁적 리더십 유형에 속하는 것으로 지원적 배려, 카리스마, 과업 동기 자극으로 3분류하였으며 거래적 리더십 유형에 속하는 것으로 상황적 보상, 예외 관리, 소극적 관리로 3분류하여 모두 6유형을제시하고 신뢰성과 타당성을 확인하였다. 실증 연구 결과를 보면 우리나라는 거래적 리더십유형인 상황적보상, 예외 관리, 소극적 관리가 모두 조직원의 상사 만족도에 영향을 미치는것으로 나타나 Bass의 주장과는 다소 상이하다. 그러나 변혁적 리더십 유형인 카리스마, 지원적 배려, 과업 동기 자극에서는 카리스마만이 조직원의 상사 만족도에 영향을 미치고 지원적 배려는 영향력의 정도가 미약하며 과업 동기 자극은 거의 영향을 미치지 못하는 것으로 나타났다. 따라서 리더의 부하 통솔 및 지도 방향에서 아직도 우리나라에서는 거래적 요소가 짙다는 것을 알 수 있었다. 비록 당분간은 리더가 거래적 리더십을 많이 사용하겠지만 기업의 역사가 길어지고 종업원의 교육 훈련의 기회가 많아지면 변혁적 리더십으로 전환되리라 생각된다.가 단층원주상피세포와 단층입방상피가 부위에 따라 다르게 분포하고 있으며, 상피세포 및 결합조직에는 두터운 근육층이 있어 음경의강한 운동성이 감지 되었다. 제주도 내의 서귀포 부근에서는 현재 천연기념물로 지정되어 있는 서귀포층내에서 많은 화석들이 산출되고 있다. 이 시대는 빙하기와 간빙기가 교호하던 시대로서, 분석 결과에 의하면 서귀포층이 쌓일 당시에 우리 나라는 빙하기의 영향을 받았던 것으로 생각된다.is)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.191-197
• /
• 2018

With a population of more than 10 million people worldwide, MegaCity was only three in 1975, but it is expected to grow to 24 in 2013 and more than 30 in 2025 and more than 3 billion worldwide by 2050 It is expected to be absorbed into smart city. Especially in Asia and Africa, urbanization is expected to proceed rapidly. As the urbanization progresses and the population living in the cities increases, there are various problems such as rapid increase of energy consumption, congestion of traffic, various aging of the infrastructure and the like. As a result, smart city is emerging as a new alternative for solving urban problems. Smart City is rapidly expanding with the development of related technologies and can improve costs, improve urban services, improve quality of life, productivity and sustainability. Therefore, this paper analyzes the size and trend of the domestic and overseas smart city market, and analyzes the smart city related policies, trends and case studies of major countries to see the development status and market of smart city related industries, Present a business utilization model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1173-1180
• /
• 2013

The construction industry has been a major player in Korean economy growth and it has been accountable for more than 15% of GDP during the last decade. However, fast-growing construction industry has also produced some unpleasant side-effects. Environmental problems are identified one of the main issues in the Korean construction industry and they are closely related to minimizing the carbon emission and delivering environmental-friendly green products. The movement of green construction, now, is considered the next driving force for the industry which has significant impacts on the future. This research investigates this green construction while focusing on governmental policy implications such as green certificate for construction products. Green building has long been recognized as the leading green construction product and the green trends have expanded to infrastructure construction such as road construction. Therefore, this research concentrates on various green road certification processes in the United States in order to develop a framework for Korean green road certification. In doing so, some of the green roads application has also been analyzed. This research intends to provide background information for Korean green construction policies, especially on green road certification.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.297-304
• /
• 2015

Recently, the demand for a PRT(Personal Rapid Transit) system based on autonomous navigation is increasing. Accordingly, the applicability investigations of the PRT system on rail tracks or roadways have been widely studied. In the case of unmanned vehicle operations without physical guideways on roadways, to monitor the position of the vehicle in real time is very important for stable, robust and reliable guidance of an autonomous vehicle. The Global Positioning System (GPS) has been commercially used for vehicle positioning. However, it cannot be applied in environments as tunnels or interiors of buildings. The PRT navigation system based on magnetic markers reference sensing that can overcome these environmental restrictions and the vehicle dynamics model for its H/W configuration are presented in this study. In addition, the design of a control S/W dedicated for unmanned operation of a PRT vehicle and its prototype implementation for experimental validation on a pilot network were successfully achieved.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.565-575
• /
• 2022

Thanks to the latest developments in digital architectural technologies, free-form designs that maximize the creativity of architects have rapidly increased. However, there are a lot of difficulties in forming various free-form curved surfaces. In panelizing to produce free forms, the methods of mesh, developable surface, tessellation and subdivision are applied. The process of applying such panelizing methods when producing free-form panels is complex, time-consuming and requires a vast amount of manpower when extracting production data. Therefore, algorithms are needed to quickly and systematically extract production data that are needed for panel production after a free-form building is designed. In this respect, the purpose of this study is to propose mathematical algorithms for the automatic generation of production data of free-form panels in consideration of the building model, performance of production equipment and pattern information. To accomplish this, mathematical algorithms were suggested upon panelizing, and production data for a CNC machine were extracted by mapping as free-form curved surfaces. The study's findings may contribute to improved productivity and reduced cost by realizing the automatic generation of data for production of free-form concrete panels.