• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.621-630
• /
• 2006

The T-50 advanced trainer aircraft combines advanced aerodynamic features and a fly-by-wire flight control system in order to produce a stability and highly maneuverability. The flight control system both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 employs the RSS concept in order to improve the aerodynamic performance in longitudinal axis and the longitudinal control laws employ the dynamic inversion with proportional-plus-integral control method. And, lateral-directional control laws employ the blended roll system both beta-betadot feedback and simple roll rate feedback with proportional control method in order to guarantee aircraft stability. This paper details the design process of developing lateral-directional control laws, utilizing the requirement of MIL-F-8785C and MIL-F-9490D. And, this paper propose the analysis of aircraft characteristics such as dutch-roll mode, roll mode, spiral mode, gain and phase margin about gains for lateral-directional inner loop feedback.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.316-319
• /
• 2018

To detect the ground moving target, forward-looking SAR images obtained from the FMCW radar can be exploited. However, the quality of the SAR image is deteriorated due to the turbulence or fluctuation because of the flight path condition during the missile movement. We herein propose an entropy-minimizing autofocus method to compensate the motion error of forward-looking SAR. In particular, owing to the geometry of the forward-looking SAR, the motion error affects the SAR image in the two-dimensional (2D) form (azimuth and time axis). Therefore, we suggest a 2D autofocus method for the motion compensation.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.301-307
• /
• 2009

The purpose of this study is to investigate the problem and complaint of current flight suit derived with the questionnaires. The survey was carried out to the 137 aviators in Army Aviation School from April to May, 2007. The questionnaires were composed of personal characteristics, usage characteristics, wearing characteristics and free comments. Regard to the questionnaires of usage characteristics, they wore the flight suit over 6 hours a day and over 5 days a week. For wearing convenience item in usage characteristics it was revealed that fitness, ease and the location of pocket were not proper, Also, it showed that the material characteristics(e.g. insulation, absorption, and sensation) for flight suit was not proper. Regard to the questionnaire of wearing characteristics, the most inconvenient part is crotch as the answer on the question of "unfitting part in size" and "inconvenient part when wearing". Free comments for the improvement requests are various size, material, stitch strengthening, pattern modifying, and accessories.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.14-21
• /
• 2006

The unsteady vortex lattice method is used to model twisting and flapping motions of a rectangular flat plate wing. The results for plunging and pitching motions were compared with the limited experimental results available and other numerical methods. They show that the method is capable of simulating many of the features of complex flapping flight. The lift, thrust and propulsive efficiency of a rectangular flat plate wing have been calculated for various twisting angles and reduced frequency with an amplitude of flapping angle($20^{\circ}$). And the effects of the twisting on the aerodynamic characteristics of the flapping wing are discussed by examination of their trends.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.126.2-126.2
• /
• 2011

MIRIS(Multipurpose InfraRed Imaging System)는 과학기술위성 3호의 주 탑재체이며 2012년 하반기 발사예정이다. MIRIS 우주관측 카메라는 0.9-2.0 ${\mu}m$ 영역에서 3.67 deg. x 3.67 deg. FOV로 우리 은하평면 survey 관측과 우주배경복사(CIB) 관측을 수행할 것이다. 현재 MIRIS는 비행모델 개발 마무리 단계에 있으며, 검교정 시험, 열-진공 시험, 진동 시험 등을 수행하고 나면 2011년 말 위성 본체와의 조립을 진행할 것이다. 망원경이 복사냉각(Passive Cooling)을 통해 200K 이하로 냉각되면, dewar에 설치된 소형 냉각기를 가동하여 적외선 센서를 90K 정도로 냉각한다. MIRIS 우주관측카메라에는 PICNIC($256{\times}256$ pixel) 센서를 사용하였고, 상온과 냉각된 상태에서의 노이즈 특성을 측정하였다. PICNIC 센서와 dewar내부를 냉각하기 위해 RICOR사의 K-508 micro stirling cooler를 사용하는데, cooler가 동작하면서 전자부에 영향을 주어 주된 잡음으로 나타남을 확인하였다. Cooler에서 발생하는 잡음을 최소화 하기위해 fanout B/D와 LVPS 부분을 개선하였으며, 본 발표에서는 잡음 측정 결과에 대해 논의 하고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.109-117
• /
• 2006

Hot firing performance test of hydrazine decomposition catalyst used for monopropellant thruster of satellite and launch vehicle was performed on the ground. A test equipment for hot firing performance measurement of catalyst test was developed in collaboration with Hanwha Corp., and the catalyst firing performance were tested with the equipment. After a reaction delay time, a catalyst activity and a granule stability were measured for 2 times, satisfactory results were obtained such as 25msec, 2%, $704^{\circ}C$ for each test items on the average. In addition, the current development status of domestic prototype catalyst and its decomposition performance test results are presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.358-361
• /
• 2007

Most aircraft cruise in the stratosphere at which temperature is below $-50^{\circ}C$ md, as a result, the surface of aircraft can be iced up. Ice on the wing can change aerodynamic characteristic and results in the deterioration of its performance. Ice on the engine inlet increases the possibility of compressor blade damage and affects the performance and safety of the engine. This paper focused on the development of icing simulation device for analyzing effect of icing on engine performance. Icing simulation tests were conducted with a liquid air system and a icing simulation device and results show that icing could be simulated with this system.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.40.3-41
• /
• 2009

인류가 위성을 발사하기 시작하면서 수많은 우주파편이 발생하게 되었고 이로 인하여 우주파편 환경은 날이 갈수록 심각해지고 있다. 우주공간을 비행하는 우주물체는 분쇄된 파편, 임무 관련 파편, rocket body 그리고 운용위성으로 구분된다. U.S. Space Surveillance Network에 따르면 10cm 이상 크기를 갖는 물체는 현재 13,000개가 넘는다고 알려지고 있고 질량만 해도 6,000톤이 넘는다. 이런 우주파편 환경으로 인하여 우주파편 간의 충돌, 우주파편과 운용위성 간의 충돌 또는 운용위성 간의 충돌에 대한 우려가 꾸준히 제기되어왔고, 불행하게도 2009년 2월 10일 Iridium 33과 Cosmos 2251 위성이 고도 790km 부근에서 충돌하여 1,300여개의 우주파편이 발생했다. 또한 2007년에 중국이 고도 860km 부근에서 750kg에 해당하는 자국의 위성(FY-1C)을 미사일로 격추시킴에 따라 2500여개의 우주파편이 발생하여 저궤도의 우주파편 환경을 더욱 심각하게 만들고 있다. 운용위성과 우주파편과의 충돌 가능성을 분석하기 위해서는 우주파편 및 위성의 궤도정보를 알아야 한다. 이를 위해서 NORAD(North American Aerospace Defense Command)에서 제공하는 TLE(Two Line Element)가 주로 이용된다. 하지만 관측 및 궤도 결정 특성상 수 km의 오차를 포함하므로 궤도정보의 공분산이 크다는 단점이 있으므로 충돌 분석을 수행하는데 있어 한계가 있다. 이 논문은 충돌분석 수행에 있어 TLE 정보만을 이용한 경우뿐만 아니라 정밀궤도와 TLE를 동시에 이용한 경우를 비교함으로써 충돌 불확실성의 해소방안을 제시할 계획이다.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.479-490
• /
• 2014

The purpose of this study is to develop a tea culture therapy program development for the improvement of self-efficacy of juvenile probationers, which is a key factor of social adaptability of juvenile probationers. After developing a tea culture therapy program, this study examines the effect of the program empirically, by applying to juvenile probationers. For this purpose, this study employs an integrative approach of qualitative and quantitative methods. It is shown from the qualitative analysis that juvenile probationers' positive attitude and active participation are considerably progressed. The results from quantitative analysis indicate that the sub-dimensions of self-efficacy such as general self-efficacy and social self-efficacy are significantly improved.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.37-46
• /
• 2006

The outside environment is very severe while aircraft is cruising. Especially small particle of icing in cold air condition can have negative influence on aircraft performance. If ice particle is attached to leading edge of wing, it can change wing configuration and decrease flight quality. If icing particle is attached to inlet of engine, it can damage compressor blade and have negative influence to aircraft safety. We make icing simulation device with liquid air system for analyzing about variation of engine performance due to incoming of icing to engine.