• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.2
• /
• pp.131-138
• /
• 2009

Analytical modal verification is considered as the process to provide an acceptable description of the subject structure's behaviour. In general, results of original analytical model are different with actual structure results to uncertainty like non-linearity of material, boundary and modified shape, etc. In this paper, the dynamic model of glider's wing is correlated with static deformation and vibration test results by goal-attainment method, multi-objects optimization technique. The structural responses are predicted by using finite element method and optimization is carried out by using the SQP(sequential quadratic programming) method which is widely used in the constrained nonlinear optimization problem. The MAC(Modal Assurance Criterion) is used to modify the mode shapes and quantify the similarity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.135-135
• /
• 2016

차세대 가스터빈 엔진 및 초음속 항공기 내 고온부의 온도가 증가함에 따라, 기존의 초내열합금 기반 소재를 사용하기 어려워지고 있다. 초고온 세라믹스는 높은 기계적 물성, 화학적 안정성 등 우수한 고온 특성을 가지고 있어 기존의 초고온 소재를 대체 할 수 있는 물질로 부상되고 있다. 하지만 기존의 금속 기반 소재 대비 높은 밀도로 인하여 초고온 세라믹 단일체를 비행체 부품에 적용하기에는 어려움이 있다. 이에 초고온 세라믹스와 탄소섬유를 포함하는 세라믹 복합체(Ceramic Matrix Composite, CMC)를 제작하여 동등한 기계적 물성을 보이면서 무게를 감소시키는 연구들이 진행 중에 있다. 초고온 세라믹스가 함침 된 세라믹 복합체의 경우 우수한 내삭마, 내산화 특성을 보이지만, 장시간 고온에 노출되어 탄소 섬유가 드러나게 되면 급격한 산화로 인해 소재 특성의 열화가 진행되는 단점을 가지고 있다. 따라서, 탄소 섬유가 드러나지 않도록 복합체 표면에 코팅층을 형성하여 세라믹 복합체 모재를 보호하는 방법이 활발히 연구되고 있다. 본 연구에서는 진공 플라즈마 용사 공정을 이용하여 다양한 공정조건 하에서 초고온 세라믹 코팅층을 형성하였다. 수십 마이크론 크기 분포를 갖는 HfC 분말을 Ar 유송 가스를 이용하여 플라즈마 화염 내부로 투입하였다. 플라즈마 화염 가스는 Ar 과 H2를 혼합하여 구성되었으며, 분위기 가스로는 N2를 사용하였다. 코팅에 사용된 모재로는 ZrB2 단일체와 SiC가 미량 포함된 HfC 단일체를 사용하였다. 다양한 공정 조건하에서 형성된 HfC 코팅층의 두께, 미세 조직구조를 SEM을 이용하여 관찰하였으며, XRD를 이용하여 형성된 HfC 코팅층의 결정구조를 분석하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.919-921
• /
• 2011

Variable nozzles are used to enhance the effectiveness of aircraft engines at various altitudes. Unsynchronized movements of variable nozzle flaps affect the direction of thrust in case the variable nozzle consists of many flaps. A synchronization test system was developed to verify the synchronization characteristics of variable nozzle mechanism including flaps. The test system has a capability to simulate combustion pressure in variable nozzle space. The test system was used to qualify the synchronization characteristics of a variable nozzle flaps affected by magnitude and uniformity of simulated combustion pressure, and time delay of each nozzle actuators.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1333-1337
• /
• 1987

본 연구는 머리운동 제어 시스템에 대한 생체 물리학적인 모델링과 시뮬레이션을 통하여 모델의 동특성을 조사하였으며, 생체운동(머리-안구)의 상호 관계를 비교하였다. 결과를 요약하면 다음과 같다. 1) 시스템을 구성하고 있는 매개변수의 변화가 출력에 미치는 영향을 조사하기 위해 감도해석법을 써서 감도계수를 구한 결과, 입력 제어신호의 펄스높이(PH), 동근의 펄스폭(PW1), 길항근의 펄스폭(PW2)이, 시스템의 출력특성을 결정하는 가장 중요한 매개변수 임을 알 수 있었다. 2) 비 선형 제어모델의 선형화를 통하여 선형모델의 응답특성과 크나큰 차이가 없음을 알았다. 3) Main-Sequence도를 작성하여 실험 데이터와 비교한 결과, 거의 일치함으로서 모델의 타당성을 입증하였다. 4) 머리운동이 시간최적으로 응답하기 위해서는 bang-bang 제어법칙이 적용되어야 함을 알았다. 5) 머리운동이 목표점에 도달하는 순간에는 길항근의 역제통 펄스가 가해 짐으로서, 길항근이 궤적의 마지막 부분을 지배함을 알았다. 6) 머리-안구운동의 main-sequence도를 비교 함으로서 상호관계를 규명하였다. 앞으로는 이 모델링 법을 개선확장하면, 비행시 파일럿의 생체 시뮬레이션, 헬멧 조준 사격 시스템등의 항공공학, 생체의용공학 연구 및 제어입력을 생체신호로 하는 로봇틱스 연구에 본 연구 방법은 유용하리라 생각된다.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.158-168
• /
• 2012

This paper deals with TVC nozzle stroke verification test and corresponding analysis techniques related to kick motor TVC system of KSLV-I second stage. It is shown that the relationship between TVC stroke and potentiometer voltage is revealed via the open-loop stroke verification test, and other major operational parameters including nozzle alignment error, actuation error, neutral position, radius of nozzle rotation, location of nozzle rotation center, angle conversion coefficients, etc. are analyzed via the closed-loop stroke verification test. The TVC stroke verification test results for the first and second flight model of KSLV-I show that all TVC operational parameters of KSLV-I second stage were normally setup for the first and second flight tests.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2014

A set of preliminary design parameters for the bipropellant rocket engine using liquid methane-fuel as green propellant were derived through a theoretical performance analysis. Chemical equilibrium analysis utilizing CEA was conducted for the prediction of combustion performance: combustion characteristics according to the O/F ratio and chamber pressure variation were investigated. For a determination of chamber-characteristic length, the vaporization time of fuel-droplet with various performance parameters was calculated by applying Spalding's 1-D droplet vaporization model. Finally, the preliminary design specification of methane-bipropellant rocket engine, which is to be performance-tested under the ground firing condition, was proposed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.652-655
• /
• 2010

BBU attached to the 155mm is the weapon system for the extension of range through the reduction of base drag. This research focus on the development of inhibitor formulation changing cure agent from DDI to IPDI. Development process is as follows. First, the formulation test about basic property Second, the study on the application of process. Third, the tests for the quality and aging properties. The test results are satisfied with the all of the requirments. In results, this research is contributed to the stable manufacturing in the instability of supplying of cure agent.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1196-1199
• /
• 2017

A series-hybrid power system was designed for quad-tilt prop UAV and the characteristics was analysed. The power system consists of a 4.5kW rotary engine-generator and a li-battery as power sources, a power controller manages the overall power and supplies to the vehicle system. The output power of the engine is to be matched with the generator performance considering mechanical driving loss and generating efficiency, and also loss for charging and discharging of the battery energy. It is applied that the constant speed operation of the engine-generator to minimize overall fuel consumption by integrating the generating power and the battery energy, consequentially the battery capacity and characteristics could be important factors for improvement of the system efficiency.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.60-66
• /
• 2019

In this report, the process characteristic(viscosity), mechanical properties, combustion characteristics, ground and flight test results of propellants used for a rocket-assisted projectile are described according to several aluminum contents. As the aluminum content increased, initial viscosity decreased, viscosity build-up accelerated, and combustion rate and pressure exponent decreased. In the ground fire test, the total impulse of the rocket-assisted projectiles containing 10 wt% of aluminum were 5% higher than that of the rocket-assisted projectiles containing 2 wt% and 18 wt% of aluminum. The motor efficiency compared to the theoretical performance was 85.6% with 18 wt% of aluminum, the lowest value among the propellant compositions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.70-77
• /
• 2000

Supersonic Dual Bell Nozzle (SDBN) is an altitude-adaptive propulsion nozzle achieved only by a nozzle wall inflection. In order to investigate the altitude adaptive capability and the effectiveness of this nozzle concept, the present study addresses a computational work of the flow through SDBN. Several types of the SDBNs are tested for a wide range of the pressure ratio which covers from an over-expended flow to a fully under-expended flow at the exit of the SDBN. Axisymmetric, compressible, Wavier-Stokes equations are numerically solved using a fully implicit finite volume differencing scheme. The present computational results reveal that the base nozzle length affects the shock wave system occurring inside SDBN. For a quit wide range of the pressure ratio the flow separation occurs at the nozzle inflection point. It is found that the maximum thrust coefficient is obtainable for the correct expansion state at the exit of SDBN.