• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.64.2-64.2
• /
• 2011

MIRIS (Multi-purpose InfraRed Imaging System), 다목적 적외선 영상시스템은 한국천문연구원에서 개발하고 있는 과학위성 3호의 주 탑재체이다. MIRIS 우주관측카메라는 한국에서 최초로 발사되는 천문우주관측용 적외선 우주망원경이다. 그 유효 구경은 80mm 이고, 탑재되는 검출기는 Teledyne사의 PICNIC $256{\times}256$ Array 이며, 이 검출기를 적용한 관측 화각(FoV)은 $3.67 deg{\times}3.67 deg$, Pixel Scale은 51.6 arcsec/pixel 이다. MIRIS는 현재 비행모델의 납품을 앞두고 우주환경 시험을 준비 및 진행하고 있으며, 시스템의 최적화 작업을 함께 수행하고 있다. 최근에 과학기술위성 3호의 발사체가 러시아 Dnepr로 결정되면서 시험 조건이 변경된 시험 항목에 대해서 EQM의 Sine진동, 충격 시험이 Qualification level로 진행되었다. 그리고 MIRIS 비행모델의 열진공 환경 시험 및 진동시험에 대한 준비 현황을 보고한다. MIRIS 비행 모델의 환경시험은 실제 위성이 겪는 acceptance level로 진행되며, 모든 시험을 통과하면 최종 납품이 이뤄질 예정이다. 또한 시스템의 최적화를 위해 수행했던 조립의 수정 항목들도 함께 보고한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1206-1213
• /
• 2021

A drone invented for the military has been increased the range of application with the development of relevant technology, and it influences to include the private area. Currently, the use of drone has been increasing in many areas, such as agriculture, unmanned parcel service, production of image contents, and architecture. In 2021, South of Korea, a drone certificate system for drone flight is introduced and on operation. In case of drone flight with the maximum takeoff weight as 2kg or up, the flight experience and practical examination are required, whereas in case of drone lighter than 2kg, the online education qualification is enough to operate it without the flight experience and practical examination. Recently, the drone related accidents have been increasing with the rapidly supply of camera drones with the maximum takeoff weight as less than 2kg. This paper introduces the characteristics of the camera drone to meet burgeoning demand, and discusses an education plan for the camera drone.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.188-196
• /
• 2007

A composite case was designed to satisfy the required condition of KSLV-I kick motor system. we performed the structure and combustion tests to insure the reliability of the case before the production of the flight model. The hydraulic, vacuum and non destruction testes as the structure test were carried out to confirm the strength of the components of the case and the characteristics of the thermal and structure were investigated through the ground combustion test.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.279-287
• /
• 2018

Flight tests for aircraft development and certification have higher air accidents risk than other aerospace industries. Accordingly risk identification necessary for risk management in the safety management system is a very important factor in preventing similar air accidents during flight tests. But internationally issued accident statistics are usually confined to commercial transport aircraft and they do not reflect characteristics of flight tests, also databases to hazards identification during flight tests are not established or available in Republic of Korea. Therefore, we identified flight test procedures and traced the major causes of aviation accidents based on the statistics and preventive materials for risk management which were issued by international organizations and advanced countries of aviation. A total of 312 final reports classified as flight test among air accident/incident database held by U.S. NTSB were researched and about 200 flight test hazard were identified. The results of this study will be used as basic data for establishing the safety management system of the national comprehensive flight performance test site.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.17-17
• /
• 1999

액체램제트 추진기관은 고체로케트 추진기관에 비해 복잡한 구조와 작동원리를 가지고 있지만 산화제인 공기를 대기로부터 직접 흡입하므로 비행체의 크기와 중량을 줄이고 순항거리를 최대한 증대시킬 수 있는 장점을 가지고 있다. 이러한 램제트 추진기관의 개발 및 실용화를 위해서는 램제트 추진기관의 유동 및 연소지상시험 설비의 구축이 필수적이다. 본 연구에서는 그 기초연구로서 연소기 입구의 속도, 온도와 같은 실제 액체램제트 추진기관의 비행조건을 완벽하게 모사할 수 있는 Vitiated Air Heater의 설계기술 확보에 연구목적을 두었다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.143-147
• /
• 2002

본 논문에서는 비행물체의 운동에 기초한 지능제어 알고리즘을 사용하여 대기의 환경적 요인과 기체형태 및 추력의 인위적 요인들간의 복잡한 함수관계를 지식과 경험에 의한 제어규칙으로서 비행안정성 확보와 자율비행을 위한 비행 자세제어를 행하였다. 비행 자세제어를 위하여 사용한 지능제어기는 다변수 입력 및 출력이 가능하며 강인성을 지닌 퍼지제어기를 사용하였다 실험을 위해 모형비행기와 자세 검출용 센서를 제작하고, 비행 전문가의 지식과 경험을 기초로 하여 작성한 제어규칙에 의하여 프로그램 된 퍼지제어기를 수 차례의 시험비행을 통해 제어규칙을 조정한 결과 안정된 자세제어를 행할 수 있었다.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.7-14
• /
• 2005

This paper describes development of automatic flight control system for an unmanned target drone. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed. The performance of automatic flight control system is verified by flight test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.41-48
• /
• 2008

One of main functions of the firing control system applied to a rocket propulsion test has been to provide electric current for ignition of a solid rocket motor. This paper describes the design and implementation of an enhanced firing control system for ground propulsion test that can also control and verify various types of squib events and flight sequences.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.76-82
• /
• 2003

To guarantee the proper functions of a satellite in the extreme space environment, the several test models are developed generally. There are advantages that the design and the analysis of Flight Model(FM) can be validated through these test models, and the functional reliabilities can be increased by reflecting the modifications on the final design of FM. The integration and test of Structure & Thermal Model(STM) of KOMPSAT, being currently developed, have been completed. In this paper, the processes of design and analysis of the STM propulsion system, one of the KOMPSAT modules, are described.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.154-160
• /
• 2008

There are typically two categories of Flight Test Programs- commercial and military. Commercial flight testing is conducted to certify that aircraft meets all applicable safety and performance requirements of government certifying agency. Military programs differs from commercial in that the government contract with the aircraft manufacturer to design and build an aircraft to meet specific mission capabilities. The final phase of military aircraft flight test is the Operational Test(OT). OT is conducted by a government-only test team with the dictate to certify that the aircraft is suitable and effective to carry out the intended mission. This paper presents the current trends of military aircraft airworthiness certification using civil aircraft certification practices.