• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.513-526
• /
• 2005

The objectives of this study are to perform extensive analysis on internal mass motion for a wider parameter space and to provide suitable design criteria for a broader applicability for the class of spinning space vehicles. In order to examine the stability criterion determined by a perturbation method, some numerical simulations will be performed and compared at various parameter points. In this paper, Ince-Strutt diagram for determination of stable-unstable regions of the internal mass motion of the spinning thrusting space vehicle in terms of design parameters will be obtained by an analytical method. Also, phase trajectories of the motion will be obtained for various parameter values and their characteristics are compared.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.2
• /
• pp.118-128
• /
• 2012

The goal of this paper is to design the target tracking controller for a quadrotor micro UAV using a vision sensor. First of all, the mathematical model of the quadrotor was estimated through the Prediction Error Method(PEM) using experimental input/output flight data, and then the estimated model was validated via the comparison with new experimental flight data. Next, the target tracking controller was designed using LQR(Linear Quadratic Regulator) method based on the estimated model. The relative distance between an object and the quadrotor was obtained by a vision sensor, and the altitude was obtained by a ultra sonic sensor. Finally, the performance of the designed target tracking controller was evaluated through flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.67-73
• /
• 2006

In this paper, a reconfigurable model following flight control method is proposed based on direct adaptive scheme using parameter estimation. Adaptive control scheme updates the control gains to make the system output follow the reference output even when fault occurs. By adopting the frequency domain parameter estimation method, system changes by the fault can be estimated. Recursive Fourier transformation is used for system identification. Using recursive Fourier transform, the proposed adaptive control algorithm guarantees the system stability and improves the system characteristics. To evaluate the performance of proposed control method, numerical simulations are performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.669-676
• /
• 2015

In this paper, a guidance law for intercepting maneuvering target with a desired impact angle is proposed. The proposed guidance law is modified from the optimal impact angle control law for a fixed target and given by a biased PN law with the impact angle control term in addition to the conventional PN law. Three different kinds of desired impact angles in the respect of LOS angle, flight path angle, and relative flight path angle to the target are defined. The performance of the proposed guidance law is investigated via numerical simulations for various air-to-air engagement scenarios.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.197-204
• /
• 2021

If a failure or an abnormal maneuver occurs during the flight test of a missile, the missile is deliberately self-destructed so as not to continue the flight. At this time, debris are produced and it is important to estimate the impact area in real-time whether it is out of the safety area. In this paper, we propose a method to estimate the debris dispersion area and falling time in real-time using a Fully-Connected Neural Network (FCNN). We applied the Unscented Transform (UT) to generate a large amount of training data. UT parameters were selected by comparing with Monte-Carlo (MC) simulation to secure reliability. Also, we analyzed the performance of the proposed method by comparing the estimation result of MC.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.115-123
• /
• 2003

In this paper, in order to guarantee successful operation of KSR-III TVC actuator in the presence of excessive external disturbances, a relief valve is designed as a key component of the actuator. It is shown that the relief valve can resolve the stability problems which occur due to actuator failure in the presence of excessive disturbance torques on the actuator. Six degree-of-freedom simulation shows that relief valves with low operating pressure and low LOHM parameter may be better is stability and performance of the TVC actuator system.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.162.1-162.1
• /
• 2012

한국형 달 착륙선의 안전하고 효율적인 달 착륙을 위해 임무 시나리오 시뮬레이션을 수행하였다. 달 착륙은 보통 두 가지 방법이 사용되는데, 지구에서 출발하여 달에 도착한 후 달착륙지에 직접 착륙하는 방법과 달의 주차궤도를 돌다가 달 착륙지에 착륙하는 방법이 있다. 미국의 Surveyor호는 직접 착륙 방법을 사용하였고 아폴로 시리즈는 달 궤도를 공전하다가 착륙하는 방법을 사용하였다. 본 연구에서는 두 가지 방법을 모두 사용하여 착륙 임무 시나리오를 시뮬레이션을 수행한 후 장단점을 비교분석하였다. 달 주차궤도를 이용한 착륙은 달고도 100km에서 공전을 하다가 고도 15km까지 하강한 후 Powered descent 단계를 통해 착륙지에 착륙하는데 Powered descent 단계는 다시 감속단계, 접근 단계, 최종 하강 단계로 나뉘어진다. 달 착륙선은 나로우주센터에서 KSLV-2에 실려 2025년에 발사되며, 달 착륙지는 달의 과학적 임무를 고려하여 달 남극 근처로 가정하였다. 달 착륙 시뮬레이션을 통해 달 착륙선의 비행 궤적과 필요한 연료량 계산 등의 정보를 통해 직접 착륙 방법과 달 주차궤도를 이용하는 방법의 장단점을 확인할 수 있었다.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.43-49
• /
• 2015

Maximum lock-on distance in tactical guidance missile using seeker image is estimated by seeker's FOV, resolution and performance of tracking algorithm. In case, a missile is launched beyond the maximum lock-on distance, the missile is guided by INS pure navigation until it enters the lock-on possible zone. However, the probability of a target's existence within seekers images decreases as flight time goes by. Therefore, it is crucial to determine the distance that satisfies a certain target existence probability (TEP) and the maximum lock-on distance in order for an operator to take over the navigation role between two distances. In this paper, simulation which can analyse TEP in tactical guided missile seeker image is designed.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.133-140
• /
• 2018

In recent years, model-based design techniques have been used as a way to support cost reduction and safety certification in the development of avionics systems. In order to support performance analysis and safety analysis of aircraft and avionics equipment (item) using model based design, we developed a multi-domain simulation environment that inter-works with heterogeneous simulators. We present a multi-domain simulation environment that can verify air data computers and integrated multi-function probes at the aircraft level. The model was developed by Simulink and the flight simulator X-Plane 10 was used to verify the model at the aircraft level. Avionics model functions were tested at the aircraft level and the air data errors of the model and flight simulator were measured within 0.1%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1659-1662
• /
• 1997

The objective of this paper is to estimate the aerodynamic derivatives of a single turbo-prop aircraft at a specified flight condition for the best deduction of the dynamic characteristics using modified maximum likelihood estimation method whcih is known to be unbiased, efficient, and consistent. The flight test data necessary to the estimation of aerodynamic derivatives is obtained by implementing the six degree of freedom nonlinear flight simulation to consider the effects of several control input types, control deflection amplitudes, and intensity of turbulence. The simulated data is added with the measurement noise, which is regarded as the actual flight test data.