• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.547-552
• /
• 2008

여러 분야를 고려해야 하는 항공기나 자동차와 같은 대형기기의 설계에서 순차적 설계는 효과에 비하여 시간과 비용이 비효율적이며, 이러한 비효율성을 해결하기 위해 다분야 최적설계(MDO) 기법이 필요 하게 되었다. 비행체 설계는 시간이 지날수록 그 중요성이 커지고 있고, 설계 시 설계 전 분야를 통합하며 분석 할 수 있는 통합 환경이 요구되고 있다. MDO 기법을 이용한 비행체 설계는 이기종 분산 컴퓨팅 능력을 제공해야하고 각 분야의 데이터 공유를 통한 효율적 관리 및, 설계 최적화 도출을 제공하며 이기종의 환경을 고려해야 하므로, 분산 컴퓨팅 기술을 요구한다. 그리드 환경은 그리드 미들웨어를 중심으로 많은 분산 컴퓨팅 자원을 효율적으로 활용하고 다양한 분야의 문제들을 풀기 위한 고성능 환경을 제공하는 기술이다. 본 논문에서는 각 설계자원을 통합하기 위해 Globus toolkit ver.4(GT4)를 그리드 미들웨어로 사용하였고, 이들을 쉽고 효율적으로 이용하기 위한 PSE포탈을 제시한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.10
• /
• pp.948-956
• /
• 2007

It is important during FSD(Full Scale Development) period to verify whether the aircraft system function meets the aircraft requirements and functional performance. Especially, the functionality of the integrated propulsion system should be verified to evaluate the compatibility with aircraft. Various flight tests such as the engine airstart test, the engine horsepower extraction test, the backup throttle functionality test had been performed to evaluate the engine/aircraft compatibility with T-50 during FSD period. Through such flight tests, it was confirmed that the propulsion system of T-50 was properly designed and installed to the aircraft. This paper shows description on each flight test item, test procedure and test results. It is expected that this paper could be a reference for preparing the propulsion flight test in other aircraft developments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1561-1567
• /
• 2013

This paper is regarding the helicopter flight control law design for the handling quality performance. MIL-F-83300 and ADS-33E specification is used of the helicopter flight handling quality and to meet these requirements, ACAH type controller is required. This paper described the ACAH type controller design and performance evaluations. Helicopter dynamics first developed as nonlinear dynamics including rotor dynamics and then linear model was extracted from hovering to forward flight mode using trim condition. Control law used the model following to meet the handling qualities, the simple inverse model as feed forward gain, decoupling logic and phase model to decouple the axes, and linear model to calculate the coefficients. Handling quality evaluation used the matlab based Conduit tool and verified that Level 1 requirement is satisfied.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.142-150
• /
• 2008

In order to ensure the individual and mutual performances among the telemetry system, tracking system, flight termination system, GPS, and inertial navigation & guidance system which are installed in the KSLV-I 2nd stage and ground equipment of the Naro space center, flight test using a light airplane is required. Since the high degree of test efficiency is fulfilled through the minute plan and analysis about selection of the equipment which are applicable to the test, harness, operation strategy, and antenna installation. KSLV-I communication environment and flight profile should be precisely taken into account during the flight test. In this document, overall aspect of the KSLV-I 2nd stage equipment specification, a rack for the installation, harness, the airplane specification, and flight route which are required for the effective flight test are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.796-805
• /
• 2016

As a part of the first stage in the helicopter flight simulator development, this study numerically evaluates handling qualities of the dynamics model. The flight dynamics model was generated using public information for AS365 N2, the target aircraft of the simulator. The flight simulator is under development as a pilot training and research tool for firefighting missions. The assessment of the model intends to validate general characteristics and suitability before the model is enhanced with flight test data. The evaluation is based on the ADS-33E-PRF(Aeroautical Design Standard Performance Specification Handling Qualities Requirement) criteria, with consideration of category of the aircraft, missions, and environment. The numerical operations follow required or recommended procedures of flight test for compliance demonstration. Evaluation results are evaluated according to the rating specified in maneuverability ADS-33E-PRF. Results have identified to provide a satisfactory platform for flight dynamic model in the general helicopter simulator generated based on the RotorLibFDM, and can be used as a base for basic training and research.

• Defense and Technology
• /
• no.10 s.164
• /
• pp.48-51
• /
• 1992

항공기 비행품질에 영향을 주는 설계분야는 크게 3가지로 항공기 형상, 조종체계 및 조종실 배치로 분류됩니다. 이들 3가지 설계분야 중에서 조정실의 운용자 인간공학적인 요구 사항을 고려하지 않으면 항공기 운용성 품질중에 3분의 1이 감소될수 있습니다 항공기를 개발할때에 개발자는 그 항공기를 운용하는 운용자의 인체, 생리, 심리, 습관 등을 고려해, 항공기 조종실의 인간공학적 최적화 설계 및 배치를 개발초기단계부터 적용해야 합니다. 항공기의 조종실의 인간공학적 최적화 설계 및 배치를 개발초기단계부터 적용해야 합니다. 항공기의 조종실 품질은 조종사가 항공기 비행 임무를 수행할 때에 항공기 비행을 위한 용이한 정보 인식, 용이한 정보 결심 및 용이한 조종의 특성을 조종사에게 제공할 때 항공기 비행 품질이 좋아질 것입니다

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.70-80
• /
• 2022

An aerial refueling provides for extension of operational time and range for aircraft and enhances mission effectiveness, hence it application by most military aircrafts. The receiver aircraft should have the aerial refueling clearance that is established by performing technical and operational compatibility assessments to certify it for aerial refueling with a specific tanker model. The compatibility assessment includes aerial refueling handling qualities, functional, fuel, lighting system testing and it is finally verified through flight testing. However, since aerial refueling compatibility assessments have never been performed in Korea, there is no experience to determine the test requirements and the scope and size of the test program for a new development aircraft. This paper therefore introduces the common techniques of aerial refueling and aerial refueling flight test methods to understand the aerial refueling FCS (Flight Control System), OFP (operational flight program) and system validation, and aerial refueling envelope clearance of a fixed wing aircraft for a boom and receptacle refueling system that is being introduced into Korea Air Force.

• Defense and Technology
• /
• no.5 s.267
• /
• pp.52-59
• /
• 2001

본딩은 전기/전자 시스템뿐만 아니라 연료, 엔진, 비행제어, 유/공압계통 등에서도 안전한 전기적인 운용을 하기 위해서 필요하다. 항공기 개발에서 본딩은 설계시부터 요구조건을 두어 엄격히 관리해야 하며, 제작시에도 제시된 요구조건에 맞게 본딩을 해야 한다. 항공기의 전기/전자계통 설계시 요구성능과 항공기 및 운용자의 안전성 확보를 본딩 계통의 설계목표로 설정하고, 세부적인 본딩 요구조건과 유사기종의 설계개념을 보완하여 현실적으로 적용가능한 적용분야별 본딩 설치 및 설계 요구조건을 정립하는 것이 매우 필수적이라고 판단된다. 이 글에서는 항공기 설계시 고려해야 되는 본딩 일반요구조건에 대하여 기술해 보고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.446-453
• /
• 2012

As part of the integration phases in developing a UAV, a System Integration Laboratory (SIL) has been developed to provide integrated test capability for the verification of avionics system requirements. The SIL has realized primary functions that are common in manned aircraft SIL's, and specialized laying stress on test data visualization and test automation under the closed-loop structure of the ground control simulation, aircraft simulation and flight simulation components. Those design results have led to easy and sure verification of lots of complex requirements of the UAV avionics system. The functions and performances of the SIL have been proved in four gradational test steps and checked to operate successfully in aircraft System Integration Test Environment for the integration of UAV ground station and aircraft.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.536-541
• /
• 2012

An instrumented pod has been developed to measure the aeroacoustic environment as well as the conventional data such as load, vibration, and aerodynamic heating of fighters during flight tests, confirming to the recently developed external pod design for fighters. This study presents the development of the measurement system in detail, being the first indigenous effort in its kind. The pod was designed to meet the requirements of the MIL-HDBK-1763 and MIL-STD-810 Method 515, which are the base to determine the locations and range of sensors. The Endevco 8510B-2 was selected as the sensor to withstand the harsh environment during the flight tests. In order to assess the integrity of the fabricated pod design, a ground run-up test of a KF-16 has been conducted with the pod installed at Station 5. The test results show that the system works well but the sound level exceeds the predetermined sensor range. The sensor range has been readjusted for flight test performed later.