• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.154-154
• /
• 2016

다공성 수지상 구리분말은 그 구조적 특성으로 인해 다양한 촉매 분야에 사용되어왔으며, 본 연구에서는 전해도 금욕의 종류에 따라 수지상 구리의 표면적 특성에 대해 연구하였다. 도금욕의 종류($CuSO_4$, $CuCl_2$, $Cu_2P_2O_7$), 인가 전위, 도금시간(1, 5, 10, 30min)에 따른 수지상 형상을 비교하였다. SEM 이미지 분석 결과 황산구리와 염화구리 도금용액에서는 plate-like dendrite 형상이 관찰되었으며, 피로인산구리 도금용액에서는 needle-like dendrite 형상이 관찰되었다. 정전위 실험결과 도금용액별 한계전류밀도에서 음(-)의 방향으로 100mV 낮은 지점의 인가 전위 및 도금시간 10분에서 3가지 용액 모두 가장 미세한 수지상 입자가 관찰되었다. 도금용액별 겉보기 밀도 및 BET 비표면적을 측정해본 결과 미세한 수지상일수록 겉보기밀도는 낮게 비표면적은 크게 측정되었다. 가장 낮은 겉보기 밀도와 가장 높은 BET 비표면적을 가지는 용액은 염화구리 도금용액이었으며 그 값은 $0.951g/cm^3$, $1.8052m^2/g$이었다.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.133-141
• /
• 2019

High specific surface area zirconia with acid-basic property was synthesized by precipitation using reflux method or hydrothermal synthesis method using ammonium hydroxide solution as precipitant in the range of pH of Zr solution from 2 to 10. The prepared zirconia was characterized by the nitrogen adsorption, X-ray diffraction (XRD), isopropanol temperature programmed desorption (IPA-TPD), scanning electron microscopy and X-ray photoelectron spectroscopy, and the catalytic activity in the IPA decomposition reaction was correlated with the acid-basic properties. When using reflux method, high pH of Zr solution was required to obtain high fraction of tetragonal zirconia, and pure tetragonal zirconia was possible at pH 9 or higher. High pH was required to obtain high specific surface area zirconia, and the hydrous zirconia synthesized at pH 10 had high specific surface area zirconia of $260m^2g^{-1}$ even after calcination at $600^{\circ}C$. However, hydrothermal synthesis with high pressure under the same conditions resulted in very low specific surface area below $40m^2g^{-1}$ and monoclinic phase zirconia was synthesized. High pH of the solution was required to obtain high specific surface area tetragonal phase zirconia. In hydrothermal synthesis requiring high pressure, monoclinic zirconia was produced irrespective of the pH of the solution, and the specific surface area was relatively low. Zirconia with high specific surface area and tetragonal phase was predominantly acidic compared to basicity and only propylene, which was observed as selective dehydration reaction in IPA decomposition reaction, was produced.

• KSBB Journal
• /
• v.6 no.4
• /
• pp.425-429
• /
• 1991

Porous glasses were prepared from $TiO_2$ containing borosilicate glass by the phase separation. Pore distribution and surface area of porous glasses were invesigated by SEM and porosimeter. As temperature and heating time increase. The pore size and volume increased, but the specific surface area decreased above the critical temperature. The specific surface area and pore size showed more sensitive change on the variation of heating temperature than of heating time.

• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.86-91
• /
• 1988

Natural zeolite rock of which dominent clay minerals were mordenite and clinoptilolite was collected from Wolsung, Kyungpook province. It was pulverized and sieved into four fractions of $1{\sim}0.5,\;0,5{\sim}0.25,\;0.25{\sim}0.1,$ and<0.1mm. The specific surface areas of its four fractions were determined by $H_2O$ and EGME. The specific surface area of zeolite was slightly affected according to species of measuring material, but was scarcely affected by partical size, nor increased of pulverizing. The surface area of zeolite was calculated from geometric structure of mordenite and it was compared with the specific surface area calculated from maximum numbers of $H_2O$ which could be adsorbed on mordenite. On the basis of that result, the specific area measured from zeolite was estimated to be a part of surface area calculated from it. Accordingly, it was suggested that a new method should be developed for the determination of an exact surface area of zeolite.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.331-336
• /
• 2001

TiOCl$_2$수용액과 암모니아수의 반응으로부터 얻은 titanium hydroxide 침전물에 대해 각각 NaOH 또한 HCl 처리를 통하여 비교적 낮은 온도에서 결정성이 우수하고, 높은 비표면적을 갖는 결정형 TiO$_2$나노분말을 제조하였다. 저온처리 조건을 변화시킴으로써 TiO$_2$분말의 결정상과 입자 모양을 제어할 수 있었는데, NaOH 처리한 다음 산처리한 분말에는 아나타제와 루틸상이 함께 형성되었으며 구형입자와 긴 스핀들 모양의 입자들로 이루어져 있었고, 비등수 처리 시에는 열처리를 통해 아나타제상의 구형 입자들을 얻을 수 있었다. Titanium hydroxide를 0.1M과 0.5M에 산처리한 분말은 모두 아나타제상을 나타내었는데, 0.1M의 분말은 구형입자로 이루어져 있었고, 0.5M의 경우는 대부분 구형입자들로 이루어져 있었지만 스핀들 모양의 입자들도 소량 관찰되었으며, 2M에 산처리한 분말은 루틸상으로서 모두 스핀들 모양의 입자들로 이루어져 있었고, 제조된 분말의 비표면적은 약 240-250$m^2$/g을 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1055-1060
• /
• 1998

The effects of particle size distribution have been investigated on the high frequency low loss Mn-Zn fer-rites. The particle size distribution was controlled by milling time. Zirconia ball and engineering plastic jar were employed to avoid iron contamination from the milling media. As increasing the milling time BET value was increased from 0.55 to 3.21m2/g and mean particle size was decreased from 2.1 $\mu\textrm{m}$ to 1.0$\mu\textrm{m}$ The large specific surface area of initial powder resulted in the high density of sintered core. However starting powders with high BET lead to inhomogeneous grain growth as well as poor electromagnetic pro-perties at sintering temperature above 1300$^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.663-669
• /
• 2004

Mullite and cordierite, which were stable oxides having excellent thermal and chemical characteristics, were widely used as an engineering and electronic materials. However, thermal shock resistance of the mullite was detriorated, and strength of the cordierite was also reduced at high temperatures. The mullite-cordierite composite powders were synthesized for solving these problems in this study. The mullite-cordierite composite powders were manufactured by the solution-polymerization method using mixtures of fused silica, aluminium nitrate, magnesium nitrate, and PVA. Crystallinity, phase formation, density, and surface area of the synthesis powders were characteristics. Fine mullite-cordlerite composite powders were successfully synthesized at 1300$^{\circ}C$ and their surface areas were about 20㎡/g after planetary milling for 1h. With increasing the milling time, surface area increased to 23 ㎡/g for 4h ana 24㎡/g for 8h.

• TTA Journal
• /
• s.140
• /
• pp.128-129
• /
• 2012

국가 차원에서 표준의 의미는 산업 육성에 있고, 기업의 입장에서 표준의 의미는 수익의 극대화에 있을 것이다. 따라서 기업이 어떤 차별화된 기술을 보유하고 있을 때 이것을 규범적 표준화를(De Jure) 추진할 것인지, 사실상의 표준화를(De Facto) 추진할 것인지 아니면 개방하지 않고 독점적이고 폐쇄적으로 활용할 것인지는 전적으로 추진하고자 하는 전략이 기업에 최대의 수익과 이익을 가져올 것인지에 달려 있다. 이번 글에서는 3가지 전략의 장단점과 사례를 알아보고자 한다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.489-492
• /
• 1998

흡착 기능을 가지는 소재로서 오래 전부터 사용되어 온 활성탄소는 최근 환경에 대한 관심이 고조되면서 새삼 주목의 대상이 되고 있는 소재이다. 제품의 형태는 사용 목적에 따라 다르지만 보편화 된 것은 주로 입상 및 분말 상이다. 하지만 이러한 형태는 비표면적이 작고 기공분포가 넓은 단점 때문에 미세 오염물의 제거에는 부적합한 면이 있다[1]. (중략)

• Proceedings of the Korea Database Society Conference
• /
• 1999.10a
• /
• pp.229-233
• /
• 1999

Internet사용자는 도메인네임을 이용하여 웹사이트에 접속하게 되기 때문에 웹사이트의 성격을 가장 간결하게 잘 나타내어서 일반 소비자들이 기억하기 쉬운 도메인네임을 등록하는 일은 매우 중요한 일입니다. 도메인네임을 선택함에 있어서, 보통은 자신의 상호, 상표, 서비표 혹은 이들의 약자를 선호하게 되는 것이 일반적 경향입니다. (중략)