• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.11-11
• /
• 2000

이동통신기술의 급격한 발달로 고주파회로의 packaging과 interconnect 기술의 고성능화 와 저가격화에 대한 새로운 도전이 요구되고 있다‘ 대부분 기존의 무선통신 부품은 P PCB(Printed Wiring Board)기술을 활용하고 있으나 이러한 기술이 점차로 고주파화되는 경 향을 만족시킬수 없어 새로운 고주파 부품기술이 요구되고 있는 실정이다 .. RF 회로를 구성 하기 위하여 PCB소재의 환경적, 치수안정성 문제를 극복하기 위하여 L TCC(Low T Temperature Cofired Ceramics)기술이 최근 주목을 받고 있다. 차세대 이동통신 기술은 수십 GHz 이상의 고주파특성이 우수하고, 고성능의 초소형의 부품을 저가격으로 제조할수 있으며, 시장의 변화에 기민하게 대처할수 있는 기술이 요구되 고 있으며, 이러한 기술적 필요성에 부합할수 있도록 LTCC 기술이 제안되었다. 이러한 C Ceramic Interconnect 기술은 높은 신뢰성을 바탕으로 fine patterning 기술과 저가의 m metallizing 기술로 가능하게 되었다. 초고주파 통신부품기술은 미국과 유럽 등을 중심으로 G GHz 대역또는 mm wave 대역의 기술에 대하여 치열한 기술개발 경쟁을 벌이고 있으며, 이 러한 고주파 패키징 기술을 바탕으로 미래의 군사, 항공, 우주 및 이동통신 기술에 지대한 영향을 미칠수 있는 기반기술로 자리잡을 전망이다. L LTCC 기술은 기존의 후막혼성기술에 비하여 공정이 단순하고 대량생산이 가능하고 가 격이 비교적 저렴하다. 또한 다층구조로 제작할수 있고, 수동소자를 내장할수 있어 회로의 소형화와 고밀도화가 가능하다. 특히 무선으로 초고속 정보를 처리하기 위하여 이동통신기 기의 고주파화가 빠르게 진행됨에 따라서 고분자재료에 비하여 고주파특성이 우수할뿐아니 라 환경적, 치수안정성이 우수한 세라믹소재플 사용함으로써 고주파 손실율을 저감할 수 있 다 .. LTCC 기술은 후막회로 기술과 tape dielectric 기술이 결합된 기술이다. 표준화된 소재 와 공정기술을 활용하여 저가격으로 고성능소자플 제작할 수 있으며, 전극재료로서 높은 전 도도를 갖고 있는 Ag, Cu, Au 및 Pd! Ag릎 사용함으로써 고주파 손실을 저감시킬 수 있다. L LTCC 기술이 최종적으로 소형화, 고기능 고주파 부품기술로 지속적으로 발전하기 위하여 무수축(Zero shrinkage) 소성기술, 광식각 후막기술 등이 원천기술로서 확립될 수 있어야 하 며, 특히 국내의 이동통신 기술에 대한 막대한 투자에도 불구하고 차세대 이동통신 부품기 술에 대한 개발은 상대적으로 미흡한 실정이므로 국내에 LTCC 관련 소재공정 및 부품소자 기술에 대한 개발투자가 시급히 이루워져야 할 것으로 판단된다. 본 발표에서는 지금까지 국내외 LTCC 기술의 발전과정을 정리하였고, 현재 이 기술의 응용과 소재와 공정을 중심으로한 개발현황에 대하여 조사하였으며, 앞으로 LTCC가 발전 해야할 방향을 제시하고자 한다.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.65-90
• /
• 2011

Private stevedoring companies are leasing and operating the container terminals of the Busan Port. The total amount of lease fees private stevedoring companies paid in 2010 reached 161 billion wons, an approximately 66 percent of the total revenue of the Busan Port Authority(BPA). In other words, lease fees are the most important revenue source for BPA. However, the lease fee assessment system of Busan container terminals goes against the principle of equity due to different assessment methods and criteria adopted by each container terminal. Therefore, the purpose of the study is to analyze the systematic problems of the lease fee assessment system that is used at Busan container terminals, and propose a new standardized scheme with a case study on the new system. In order to standardize the assessment system, the assessment methods need to be simplified by using the Discounted Cash Flow(DCF) method. In addition, the assessment criteria such as assessment duration, discount rates, price indexes, estimated container throughputs, sales unit price per TEU, operation costs, including labor costs, need to be standardized as well. The new standardized assessment system can be applied to estimate lease fees for new terminals. However, for existing terminals to run the new system, factors such as assessment duration, discount rates, price indexes, estimated container throughputs, investment and re-investment costs, and maintenance & repair costs of the new system should be changed slightly.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2007.05a
• /
• pp.39-50
• /
• 2007

Sexing from bovine embryos fertilized in vitro implicates a possibility of the sex controlled cattle production. This study was carried out to produce the sex determined cattle through the embryonic sexing by fluorescence in situ hybridization (FISH) technique. FISH was achieved in in vitro fertilized bovine embryos using a bovine Y-specific DNA probe constructed from the btDYZ-1 sequence. Using this probe, a male-specific signal was detected on 100% of Y-chromosome bearing metaphase specimens. The analyzable rate of embryonic sexing by FISH technique was about 93% (365/393) regardless of embryonic stages. As tested single blastomere by FISH and then karyotype with their biopsied embryos, the accuracy of sex determination with FISH was 97.6%. We tried the embryo transfer with sex determined embryos on 15 cattle. Among them, the 5 cattle delivered calf with expected sex last year.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.4 no.1
• /
• pp.159-175
• /
• 1998

In order to investigate the antitumor effect by Chungsangbohahwan after B-16 cells were transplanted in C57BL/6 mice, and the immune responses in mice induced by methotrexate, the extract of Chungsangbohahwan was orally administered to the mice for 21 days. Experimental studies were performed for measurance of metastasis, cell cytotoxicity in vitro, natural killer cell activity, productivity of interleukin-2. The results were summarized as follows: 1. Inhibition of metastasis in Chungsangbohahwan-treated group was higher than control group with significance on 7th day and 14th day. 2. On the MTT assay, cell viability was significantly inhibited by $5{\mu}g/well$, $2.5{\mu}g/well$, $1.25{\mu}g/well$, and $0.625{\mu}g/well$ of Chungsangbohahwan concentration inhibited cell viability significantly(P<0.05). $IC_{50}$ for cell viability was $2.17{\mu}g/well$. 3. Natural killer cell activity in Chungsangbohahwan-treated group was significantly increased on 100:1, 50:1 E/T(effect cell/target cell) ratio(P<0.05). 4. Production of interleukin-2 in Chungsangbohahwan-treated group was significantly increased(P<0.05).

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.46-54
• /
• 2013

This research outlined the factors influencing the business management success via analyzing a survey of business principles. The research process has been tested in comparison of both financial factors, which come out of objective data and non-financial factors so relevantly prioritized by combining these factors. In order to specify the factors, a check-list and analyzed essential features of category have been done with interviews and surveys. As consequently proceeding, the authors could deduce that non-financial but analytic factors such as business do-able, technician workability, compensation and benefits etc. play major roles in construction sector. The outcomes consider a construction business as fundamental human labor job as opposed to a manufacture business. On reasoning necessarily more objective research works to be done as developing this research's outcome, it is meaningful in suggesting the pivotal factors influencing the construction business management. Therefore, this research is expected to guide the direction to induce the improvement of business management to be done by further exemplary researches.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.159-160
• /
• 2010

In this paper, we compared the absorption abilities of AMP and Sendust EM wave absorbers for a port logistics RFID system. Firstly, we fabricated EM wave absorber samples by using each absorbing material, AMP or Sendust, and CPE (Chlorinated Polyethylene) with composition ratios 85 : 15 wt. %. Secondly, we designed the optimum EM wave absorber using the calculated material constants found from the measured input impedance of the samples. Therefore, we confirmed that imaginary factor of complex relative permeability influences absorption ability and that AMP is better absorbing material than Sendust at the frequency band of 433 MHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2319-2324
• /
• 2012

In this paper, the design of asymmetric branch line couplers using artificial dielectric substrate (ADS) is described. The effective permittivity and permeability increase in ADS because of the lots of the inserted via-holes. So the physical length and width of transmission lines realized on ADS are reduced compared to the standard lines. This enables one to design size-reduced microwave circuits. As an instance in this work, an asymmetric branch line coupler with the ratio of 3:1 is designed at 2GHz. The designed coupler has a small size of 53.4% compared to the normal circuit while the same performances are preserved. A good agreement between the simulated and measured asymmetric power dividing ratio is shown. The measured loss is only less than 0.2dB, which is a very small value.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.653-660
• /
• 1996

For oxygen PSA process development, adsorbed amount of oxygen and nitrogen on various adsorbents were measured corresponding Langmuir isotherm parameters were measured. A reasonable adsorbent for oxygen process was selected based on the effective adsorbed amount. The PSA process consists of adsorption, desorption, pressurization, purging and pressure equilization steps. Adsorption pressure was about 2 atm and desorption pressure was between 120 torr to 400torr. Cycle time of 2-bed PSA process was 80 seconds and that of 3-bed oxygen PSA process was 180 seconds. In order to compare and analyze operation characteristics and economic feasibilities of 2-bed and 3-bed oxygen PSA processes, productivity, oxygen concentration and recovery were compared and the effect of purge and pressurization steps on the performance of PSA processes were analyzed. For the commercial scale oxygen PSA process, capital and electricity cost were estimated. In the range of $O_2$ production less than $700Nm^3/hr$, the 2-bed process is conformed more feasible in economic view point.

• Journal of Service Research and Studies
• /
• v.6 no.3
• /
• pp.57-78
• /
• 2016

The purpose of this research is to study how service recovery activities influence customers' commodity churning in the media telecommunication industry(CATV industry). Put it differently, we tried to identify this change of commodity churning rates by the stages of service failures, by which we intend to emphasize the importance of service recoveries. Korean media telecommunication market has already been saturated; customers tend to move to bigger major companies with better customer care increasingly. As once customers gone never returns, CRM functions are being reinforced over the time. We were able to have the following results. First, turning rates, for those experienced service failure, who were dissatisfied with service recovery activities are 2~5 times (monthly average turning rates are 1.3%) higher than those satisfied. Secondly, active service recovery activities at the customer's service request after experiencing service failure lowered churning rates significantly. The most effective timing is service recovery activities pre-recovery stage. Thirdly, reward activities after service recovery activities at the immediate recovery stage is more effective than service recovery at the arranged recovery schedule and reward activities after customer's expressing churning intension. The implications of this study are that firms should engage in service recovery activities at the time of identifying service failures, prior to customer's expressing churning intention, which means relatively lower ROI for the service recovery activities than the times of customers' expressing churning intention.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.420-430
• /
• 2001

The object of this study is to develop a computer program for the arrangement of the forest-road network maximizing the investment effect in forest-road construction with factors such as terrains, forest physiognomy, management plan, logging system, cost of forest-road construction, capacity of inputted labour, capacity of timber production and so on. The operating system developed by this study is Korean Windows 95/98 and Microsoft Visual Basic ver. 5.0. User interface was designed as systematic structure, it is presented as a kind of GUI(graphic user interface). The developed program has result of the most suitable forest-road arrangement, has suitable forest-road density calculated with cost of logging, cost of forest-road construction, diversion ratio of forest-road, cost of walking in forest. And the most suitable forest-road arrangement was designed for forest-road arrangement network which maximized investment effect through minimizing the sum of cost of logging and cost of forest-road construction. Input data were divided into map data and control data. Digital terrain model, division of forest-road layout plan, division of forest function and the existing road network are obtained from map data. on the other hand, cost of logging related terrain division, diversion ratio of forest-road and working road, cost of forest-road construction, cost of walking, cost of labor, walking speed, capacity of inputted labor, capacity of timber production and total distance of forest-road are inputted from control data. And map data was designed to be inputted by mesh method for common matrix. This program can be used to construct a new forest-road or vice forest-road which compensate already existing forest-road for the functional forestry.