• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.13-15
• /
• 2014

최근 경제적인 연비와 효율적인 가동성, 배기가스 감소의 이유로 초임계압 보일러가 각광받고 있다. 하지만 보일러 연소로는 용접된 튜브로 구성되어 있기 때문에 연소 시 내부압력에 의해 발생되는 진동에 취약하여 이에 대한 진동안정성 평가가 필요하다. 본 논문에서는 CFD 기법을 기반으로 수행한 변동압력 해석과 단순화한 모델을 이용한 진동해석을 통하여 보일러 운전 시의 진동안정성 평가를 수행하였다. 변동압력해석은 정상상태 CFD 해석을 수행하고, 이를 이용한 음향모드 해석과 비정상상태 CFD 해석에서 변동압력을 추출하고, 음향모드 해석결과와 주파수 성분을 비교하여 검증하였으며 이를 진동해석 모델에 기진력으로 적용하여 보일러 연소로의 진동해석을 수행하였다. 진동해석 모델은 동특성을 고려한 등가물성치를 이용하여 연소로의 복잡한 구조를 단순화하였으며 buckstay 등의 방진구조를 구현하여 보일러의 진동안정성을 평가하는 기법을 정립하였다. 해석결과, 보일러 운전조건에서 비정상상태 CFD 해석을 통해 구한 변동압력과 진동해석을 통해 얻은 가속도 응답은 안정적 수준인 것으로 확인하였다. 이는 향후 유사한 보일러 안정성 평가에 적용이 가능하고, buckstay 등 보일러의 방진 구조 설계 및 평가에도 적용할 수 있음을 확인할 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.7
• /
• pp.1-8
• /
• 2005

For study on the unsteady wall interference effect, flows around a circular cylinder in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The computed results showed that the unsteady pressure gradient over the cylinder is enhanced by the wall interference, and as a result the fluctuations of lift and drag are augmented. The drag is further increased because of the lower base pressure. The vortex shedding frequency is also increased by the wall interference. The pressure on the test section wall shows the harmonics having the shedding frequency contained in the wall effect.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.28-39
• /
• 2018

In this study, numerical simulations were performed for steady and unsteady state characteristics of length effects on linear pintle nozzles using the overset grid method. Nozzles and pintles are created separately by an auto grid generation program to use the overset grid method. Appropriate turbulent models and numerical methods are selected for the validation of simulations. Pintle shapes are chosen from five types, with differences in the ratio of length and diameter. The longer the pintle length, the greater the thrust and thrust coefficient. The chamber pressure tendency of steady-state and unsteady-state are different for various pintle velocities. The thrust of the nozzle exit responds to changes in the nozzle throat in the unsteady-state, and the speed of pressure propagation wave generated by movement of the pintle is considered to predict the major factor of performance.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.617-622
• /
• 1998

일체형원자로인 SMART에서는 증기발생기와 주순환펌프가 배관으로 연결되어 있지 않고 주순환펌프를 통과한 냉각수가 압력헤더를 통하여 12개의 증기발생기 카세트로 흐르게 된다. 각 증기발생기 카세트를 통과하는 냉각수 유량분포의 비균일도를 운전모드에 따라 계산하여 이 압력헤더가 각 증기발생기 카세트로 흐르는 냉각수 유동분포에 미치는 영향을 분석하고 SMART 주순환펌프 압력헤더의 설계가 설계기준을 만족시키는 지를 검증하였다. 검증계산 결과 비균일도가 정상운전시는 0.8%. 비정상 운전시는 7.1%로 설계기준을 만족시키는 것을 확인하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.267-273
• /
• 2004

This paper targets to define controlling factors of pressure-coupled combustion response and estimate their effects on droplet evaporation process. Dynamic characteristics of hydrocarbon propellant vaporization perturbed by acoustic pressure are numerically simulated and analyzed. 1-D droplet model including phase equilibrium between two phases is applied and acoustic wave is expressed by harmonic function. Effects of various design factors and acoustic pressure on combustion response are investigated with parametric studies. Results show that driving frequency of acoustic perturbation and ambient pressure have important roles in determining magnitude and phase of combustion response. On the other hand, other parameters such as gas temperature, initial droplet size and temperature, and amplitude of acoustic wave cause only minor changes to magnitude of combustion response. Resultant changes in phase of heat of vaporization and thermal wave in droplet highly influence magnitude and phase of combustion response.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.117-120
• /
• 2005

The present study describes unsteady flow phenomena generated in a supersonic flow passing over a rectangular cavity and suggests a way of control of pressure oscillation, doing harm to overall performance and stable operation of aerodynamic and industrial applications. The three-dimensional, unsteady, compressible Navier-stokes equations are numerically solved based on a fully implicit finite volume scheme and large eddy simulation. The cavity flow are simulated with and without control methods, including a triangular bump and blowing jet installed near the leading edge of the cavity. The results show that the pressure oscillation is attenuated by both control techniques, especially near the trailing edge of cavity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.39-45
• /
• 2000

A Thruster valve operates to supply fuel into thruster chamber. Very quick on-off operation of thruster valve results in unsteady flow of fuel in the propellant supplying system. Then fuel kinetic force, elastic material of propellant line, compressibility of fuel cause the flow field to pulsate. The pressure oscillation arising from resonance would damage the weak part of the thruster valve and other propellant supplying equipment. Pressure drop and fuel flowrate through propellant suppling system were measured, and pressure oscillation were triggered at the thruster valve inlet.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.2 s.7
• /
• pp.57-65
• /
• 2000

The aim of this paper is to understand the unsteady flow phenomena in a high speed centrifugal compressor channel diffuser. Instantaneous pressures aye measured at six locations in the diffuser using fast-response pressure transducers. Instantaneous pressure ratio decomposition was applied to analyze the pressure signal. In vaneless space where impeller-vaned diffuser interaction is strong, aperiodic unsteadiness is high and periodic pressure waveforms by blade passing are not clear at low flow rates, especially near vane suction side. High aperiodic unsteadiness decreases downstream of diffuser. The blade-to-blade pressure wave does not disappear in surge flow condition. In surge there exist not only large scale periodic surge wave but also blade-to-blade pressure wave.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.213-216
• /
• 2010

A typical unsteady internal ballistic analysis model was proposed to take account of the erosive burning for a solid rocket motor. The variance of local velocity and pressure along grain surface are analyzed by using the continuity and momentum equation. The model introduced in this study showed good agreements with the results of previous internal ballistics program. It was investigated that the change of combustion pressure, gas velocity and regrestion rate along the grain axis.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.69-77
• /
• 1999

The aim of this paper is to understand the unsteady flow phenomena in a high speed centrifugal compressor channel diffuser. Instantaneous pressures are measured at six locations in the diffuser using fast-response pressure transducers. Instantaneous pressure ratio decomposition was applied to analyze the pressure signal. In vaneless space where impeller-vaned diffuser interaction is strong, aperiodic unsteadiness is high and periodic pressure waveforms by blade passing are not clear at low flow rates, especially near vane suction side. High aperiodic unsteadiness decreases downstream of diffuser. The blade-to-blade pressure wave does not disappear in surge flow condition. In surge there exist not only large scale periodic surge wave but also blade-to-blade pressure wave.